Oil and Gas

Course catalogue

hits
655
Course code: MUK-017
Course type: E-learning course
Duration: 275 minutes
Language: English
Price: NOK 1500,-

Who is the course for?

Personnel responsible for conducting atmospheric testing at the worksite.

 

Is previous experience required?

No previous experience is required.

 

How will the course benefit me?

This course aims to provide the knowledge and techniques for carrying out gas  testing.

 

How will the course benefit my company?

By ensuring that personnel are aware of the situations and circumstances in   which a hazardous atmosphere could occur and the steps that should be taken   in an emergency.

 

What standards are referenced in the course?

Health and Safety at Work Act

CoSHH

PFEER

Management of Health and Safety at Work Regulations

EH40 Workplace Exposure Limits (WELs)

Confined Space Regulations

 

Is there an assessment? 

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.

Course code: MTP-063-FT
Course type: E-learning course
Duration: 2 hours
Language: English, Norwegian
Price: NOK 1200,-

Who is this course for?

Everyone working on low and high voltage installations.

 

Is previous experience required?

You do not need prior knowledge or experience to complete this course and it is assumed that you are competent in your designated role

 

How will this course benefit me?

The course meets the requirements set in § 7 of the ""Safety Regulations for Work and Operation of Electrical Equipment and Installations- FSE"", that relevant personnel shall be given annual training and instruction in FSE. The course also provides the necessary training and instruction in first aid, focusing on electrical injuries, with the exception of the mandatory practical training in cardio-pulmonary resuscitation (CPR).

The regulations of various authorities make FSE applicable to all those working with electricity, whether on board ship, on platforms or on land. This course is suitable for all, regardless of which industry you work in. 

 

The authorities require that training in FSE and first aid in the event of electrical accidents is undertaken at least once a year. No more than 12 months shall elapse between training courses.

 

How will this course benefit my company?

By ensuring you have the knowledge and competence to be working on low and high voltage installations.

 

What standards are referred to in this course?

 § 7 of the ""Safety Regulations for Work and Operation of Electrical Equipment and Installations- FSE""

 

Is there an assessment?

The fast track version of the FSE course starts with a pre-test which checks the participant's knowledge of FSE. Depending on the answers given, the participant will get a course that is tailored to the level of knowledge revealed in the pre-test. The fast track version of the course is suitable for all but is particularly practical for those undertaking refresher training in FSE. 

 

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.

 

Course code: MUK-012
Course type: E-learning course
Duration: 30 minutes
Language: English
Price: NOK 500,-

Who is the course for?

This course is aimed at all personnel involved in lifting operations in the Oil and Gas Industry.

 

Is previous experience required?

No previous experience is required to complete this course. 

 

How will the course benefit me?

This course provides learners with an awareness of the Lifting Operations and Lifting Equipment Regulations (LOLER) and gives an overview of industry best practice in relation to working with lifting equipment.

 

How will the course benefit my company?

By ensuring you have an awareness of the Lifting Operations and Lifting Equipment Regulations (LOLER) and the industry best practice in relation to working with lifting equipment.

 

What standards are referenced in the course?

Lifting Operations and Lifting Equipment Regulations (LOLER) 

Health and Safety at Work Act 

Management of Health and Safety at Work Regulations 

Provision and Use of Work Equipment Regulations (PUWER) 

 

Is there an assessment?

Yes

 

Accreditation

This course is approved by the Institution of Occupational Safety and Health (IOSH).

IOSH is the world’s Chartered body for safety and health professionals.

 

What that means:

We are the largest membership body for health and safety professionals.

We champion occupational safety and health causes and advocate for change.

We advise governments, NGOs and policymakers.

We facilitate safety and health awareness training in around 130 countries through IOSH Services Ltd, our wholly-owned trading arm.

We commission research and set national and international standards.

We shape the future of the profession.

Course code: MTP-004
Course type: E-learning course
Duration: 90 minutes
Language: English, Norwegian
Price: GBP 120,-

Who is this course for?

This HSE Chemicals training course is for personnel who require an introduction to or awareness of working with chemicals in the oil and gas industry.

Is previous experience required?

No previous experience is required to complete this course.

How will this course benefit me?

The course is for all those who work with or can come in contact with chemicals. The course is also intended for those who work on a general basis with workplace environment issues, purchasing, or transportation. The course will give the target group fundamental knowledge of safe use of chemicals.

How will this course benefit my company?

By ensuring you have fundamental knowledge of the safe use of chemicals.

What standards are referred to in this course?

  • REACH
  • The Working Environment Act
  • The Product Control Act
  • The Pollution Control Act
  • The Chemical Labelling Regulations
  • Regulations relating to Organisation, Management and Participation
  • The Internal Control Regulations
  • Performance of Work Regulations
  • The Product Control Regulations

Is there an assessment?

Yes

Course code: MUK-021
Course type: E-learning course
Duration: 30 minutes
Language: English
Price: NOK 500,-

Who is this course for?

Personnel requiring knowledge or awareness of HAZID.

 

Is previous experience required?

You do not need prior knowledge or experience to complete this course.

 

How will this course benefit me?

This course aims to provide all personnel with solid hazard identification awareness to enable them to evaluate hazards quickly and effectively so that they can carry out their duties as safely as possible. 

 

How will this course benefit my company?

By ensuring you are able to evaluate hazards quickly and effectively so that you can carry out your duties as safely as possible. 

 

What standards are referred to in this course?

This course does not refer to specific legislation or standards but is written according to industry best practice.

 

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.

Course code: MUK-027
Course type: E-learning course
Duration: 30 minutes
Language: English
Price: NOK 500,-

Who is the course for?

All personnel who may be exposed to Naturally Occurring Radioactive Material (NORM) in the workplace.

Is previous experience required?

No previous experience is required to complete this course.

How will the course benefit me?

This course aims to provide an awareness of NORM and provide best practices for managing NORM in oil and gas producing facilities.

How will the course benefit my company?

The course will benefit companies by ensuring that all members of personnel have an awareness of NORM and how it should be managed, which will help to reduce workplace accidents.

What standards are referenced in the course?

There are no standards or regulations referenced in this course.

Is there an assessment? 

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.


Accreditation:

This course is approved by the Institution of Occupational Safety and Health (IOSH).

IOSH is the world’s Chartered body for safety and health professionals.

 

What that means:

We are the largest membership body for health and safety professionals.

We champion occupational safety and health causes and advocate for change.

We advise governments, NGOs and policymakers.

We facilitate safety and health awareness training in around 130 countries through IOSH Services Ltd, our wholly-owned trading arm.

We commission research and set national and international standards.

We shape the future of the profession.

Course code: MUK-026
Course type: E-learning course
Duration: 45 minutes
Language: English
Price: NOK 500,-

Who is this course for?

All personnel across an organisation to set a benchmark of knowledge and awareness of risk assessment.


Is previous experience required?

No previous experience is required to complete this course.


How will this course benefit me?

This course aims to introduce, develop and increase learners’ knowledge and awareness of the importance of Risk Assessment and how it can reduce the likelihood of accidents in the workplace.

How will this course benefit my company?

By ensuring you have the required knowledge and awareness of the importance of Risk Assessment and how it can reduce the likelihood of accidents in the workplace.


What standards are referred to in this course?

No standards or regulations are referenced in this course.


Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.


Accreditation:

This course is approved by the Institution of Occupational Safety and Health (IOSH).

IOSH is the world’s Chartered body for safety and health professionals.

 

What that means:

We are the largest membership body for health and safety professionals.

We champion occupational safety and health causes and advocate for change.

We advise governments, NGOs and policymakers.

We facilitate safety and health awareness training in around 130 countries through IOSH Services Ltd, our wholly-owned trading arm.

We commission research and set national and international standards.

We shape the future of the profession.

Course code: MUK-002
Course type: E-learning course
Duration: 45 minutes
Language: English
Price: NOK 500,-

Who is this course for?

All personnel who works in a role within the Oil and Gas Industry that may have a direct impact on the environment.

Is previous experience required?

No previous experience is required to complete this course.

How will this course benefit me?

This course aims to increase learners’ awareness of the environmental aspects and impacts related to the Oil and Gas Industry and the actions that can be taken to minimise environmental damage.

How will this course benefit my company?

This course will benefit a company by helping personnel become aware of actions that can be taken to reduce environmental damage.

What standards are referred to in this course?

BEIS (formally DECC))

Oil Spill Prevention and Response Advisory Group

Health and Safety Executive (HSE) 

ISO 14001 Environmental Management Systems

Is there an assessment?

Yes


Accreditation:

This course is approved by the Institution of Occupational Safety and Health (IOSH).

IOSH is the world’s Chartered body for safety and health professionals.

 

What that means:

We are the largest membership body for health and safety professionals.

We champion occupational safety and health causes and advocate for change.

We advise governments, NGOs and policymakers.

We facilitate safety and health awareness training in around 130 countries through IOSH Services Ltd, our wholly-owned trading arm.

We commission research and set national and international standards.

We shape the future of the profession.

Course code: IMIST-001
Course type: E-learning course
Duration: 300 minutes
Language: English
Price: USD 99,-

Who is the course for?

This eLearning course is aimed at individuals who work offshore, in any role, anywhere in the world.

 

Is previous experience required?

The course is designed for existing workers in the oil and gas industry. Completion of this course awards an IMIST certificate valid for four years, after which you will need to sit the course again to refresh your knowledge and earn a new certificate.

 

How will the course benefit me?

The offshore working environment is home to many hazards, which means that it is vital for everyone who goes offshore to have the same baseline level of safety knowledge. This course has been created with OPITO to set a global safety standard by applying a consistent level of safety awareness across nine safety critical areas and is applicable .

The knowledge gained in this course will help you to stay safe in your day-to-day activities offshore. It will also outline some of the systems and procedures in place to manage everyday operations offshore.

 

How will the course benefit my company?

By ensuring that your safety knowledge is at or above the baseline level, your company can rest assured that you are able to work offshore safety and in compliance with regulations and company procedures. Increased safety knowledge helps to prevent incidents and makes your working environment a safer place.

 

What standards are referenced in the course?

This course is written based on the OPITO standard International Minimum Industry Safety Training Standard (IMIST) (5312). As a global standard, the course is not written to meet any specific regional legislation but references industry best practices and standard operating procedures throughout.

 

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 100%. 

The course starts with an optional pre-assessment that checks your existing knowledge of the course topics. The course will restructure so that it only contains the content needed to address the gaps in your knowledge.


Please find pre-course information and learning outcomes here: 

https://mintra.com/implementing-maintaining-opito-standards-policy

Course code: MGM-029
Course type: E-learning course
Duration: 50 minutes
Language: English
Price: GBP 70,-

Who is the course for? 

All ship officers and shore personnel who are involved in ship operations.

 

Is previous experience required? 

No previous experience is required to complete this course.

 

How will the course benefit me? 

The Ship Energy Efficiency Management Plan (SEEMP) is a management tool to assist shipowners, technical managers and the ship's personnel in managing the energy efficiency and air emissions of their ships. 

 

How will the course benefit my company? 

By ensuring you have an overview of the Ship Energy Efficiency Management Plan.

 

What standards are referenced in the course? 

  • The International Maritime Organization (IMO) Guidelines for the Development of a Ship Energy Efficiency Management Plan (SEEMP)
  • The IMO Fuel Oil Data Collection System (DCS)
  • The European Union Monitoring, Reporting and Verification (MRV) Regulation
  • The International Convention for the Prevention of Pollution from Ships (MARPOL)
  • The IMO Guidelines for Voluntary Use of the Ship Energy Efficiency Operational Indicator (EEOI)
  • The IMO Guidelines on the Method of Calculation of the Attained Energy Efficiency Existing Ship Index (EEXI)
  • The IMO Guidelines on Operational Carbon Intensity Indicators and the Calculation Methods (CII Guidelines, G1)

 

Is there an assessment? 

Yes

Course code: MTP-015
Course type: E-learning course
Duration: 15 minutes
Language: English, Norwegian
Price: NOK 800,-

An introduction to ergonomics in the workplace, especially offshore related work. The course looks at correct working techniques, what makes a good working environment, what measures that helps, and who is responsible for maintaining good ergonomic conditions in the workplace.

 

Course Content

- Introduction 

- Correct working techniques 

- Environment 

- Measures that help 

- Responsibility and implementation

Course code: MUK-009
Course type: E-learning course
Duration: 45 minutes
Language: English
Price: NOK 500,-

Who is this course for?

All personnel who could potentially be exposed to noise in the workplace. 

Is previous experience required?

You do not need prior knowledge or experience to complete this course and it is assumed that you are competent in your designated role.

How will this course benefit me?

This course aims to provide personnel with the knowledge required to understand the hazards and controls associated with noise in the workplace.

How will this course benefit my company?

By ensuring personnel are aware of the hazards posed by noise in the workplace and the controls that should be put in place to minimise their exposure and reduce the risk of hearing loss.

What standards are referred to in this course?

Control of Noise at Work Regulations

Is there an assessment?

Yes

 

Accreditation:

This course is approved by the Institution of Occupational Safety and Health (IOSH).

IOSH is the world’s Chartered body for safety and health professionals. 

 

What that means:

We are the largest membership body for health and safety professionals.

We champion occupational safety and health causes and advocate for change.

We advise governments, NGOs and policymakers.

We facilitate safety and health awareness training in around 130 countries through IOSH Services Ltd, our wholly-owned trading arm.

We commission research and set national and international standards.

We shape the future of the profession.

Course code: MUK-029
Course type: E-learning course
Duration: 20 minutes
Language: English
Price: NOK 500,-

Who is the course for?

This is course is for those who work with and have an exposure risk to benzene. 

 

Is previous experience required?

No previous experience is required to complete this course. 

 

How will the course benefit me?

This course will benefit learners by providing them with an awareness of benzene and providing best practices for working with benzene in oil and gas producing facilities.

 

How will the course benefit my company?

The course will benefit companies by ensuring that all possible precautions are taken to reduce accidents or injuries resulting from benzene exposure.  

 

What standards are referenced in the course?

Control of Substances Hazardous to Health (COSHH) Regulations

OSHA, the Occupational Safety and Health Administration

 

Is there an assessment?

Yes 

 

Accreditation

This course is approved by the Institution of Occupational Safety and Health (IOSH).

IOSH is the world’s Chartered body for safety and health professionals. 

 

What that means:

We are the largest membership body for health and safety professionals.

We champion occupational safety and health causes and advocate for change.

We advise governments, NGOs and policymakers.

We facilitate safety and health awareness training in around 130 countries through IOSH Services Ltd, our wholly-owned trading arm.

We commission research and set national and international standards.

We shape the future of the profession.

Course code: MUK-007
Course type: E-learning course
Duration: 45 minutes
Language: English
Price: NOK 500,-

Who is this course for?

Personnel who are involved in work processes that can result in hand-arm vibration exposure.

Is previous experience required?

No previous experience is required to complete this course.

How will this course benefit me?

This course will benefit learners’ by making them aware of the risks of hand-arm vibration and the effects that it can cause.

How will this course benefit my company?

This course will benefit companies’ by ensuring that personnel have an understanding of the risks of hand-arm vibration and in turn will reduce the number of injuries that result from this.

What standards are referred to in this course?

Health and Safety Executive (HSE)

Control of Vibration at Work Regulations

Supply of Machinery (Safety) Regulations

Is there an assessment?

Yes


Accreditation:

This course is approved by the Institution of Occupational Safety and Health (IOSH).

IOSH is the world’s Chartered body for safety and health professionals.


What that means:

We are the largest membership body for health and safety professionals.

We champion occupational safety and health causes and advocate for change.

We advise governments, NGOs and policymakers.

We facilitate safety and health awareness training in around 130 countries through IOSH Services Ltd, our wholly-owned trading arm.

We commission research and set national and international standards.

We shape the future of the profession.

 

Course code: MUK-070
Course type: E-learning course
Duration: 30 minutes
Language: English
Price: NOK 500,-

Who is the course for?

Any personnel who require an awareness of the environmental impacts associated with offshore waste and how these wastes can be managed.

 

Is previous experience required?

You do not require any previous experience to complete this course.

 

How will the course benefit me?

This course will provide you with an understanding of the types of waste generated offshore, how these wastes impact the environment and the methods that can be used to reduce and manage waste.

 

How will the course benefit my company?

Environmentally aware personnel can help to reduce the environmental impacts of your operations and improve environmental performance.

 

What standards are referenced in the course?

• The European Union (EU) Waste Framework Directive

• The International Convention for the Prevention of Pollution from Ships (MARPOL) 1973 - Annex IV

• Merchant Shipping (Prevention of Pollution by Sewage and Garbage from Ships) Regulations

• Deposits in the Sea (Exemption) Order 

• Landfill Directive 

• Environmental Protection (Duty of Care) Regulations

• Special/Hazardous Waste Regulations

• The Special Waste Amendment (Scotland) Regulations 

• Hazardous Waste (England and Wales) Regulations 

• Radioactive Substances Act

• Environmental Permitting (England and Wales) Regulations 

• Waste (England and Wales) Regulations

• Waste (Scotland) Regulations 

• Controlled Waste (England and Wales) Regulations

• Zero Waste (Scotland) Regulations

 

Is there an assessment? 

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.

Course code: MTP-900
Course type: E-learning course
Duration: 1 hour 30 minutes
Language: English, Norwegian
Price: NOK 900,-

Who is this course for?

This course is for personnel work at Equinor installations.

 

Is previous experience required?

You do not need prior knowledge or experience to complete this course and it is assumed that you are competent in your designated role

 

How will this course benefit me?

The course will give the target group fundamental knowledge of safe use of chemicals.

The course is relevant for personnel who work at Equinor installations, and those who work with or may come in contact with chemicals.

 

How will this course benefit my company?

By ensuring you have fundamental knowledge of safe use of chemicals.

 

What standards are referred to in this course?

N/A

 

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.

Course code: TQ_007
Course type: E-learning course
Duration: 15 Minutes
Language: English
Price: GBP 15,-

Written communications are a necessary part of a manager’s daily work. Whether responding to emails, composing performance reviews for team members, editing an industry report, or crafting a letter to a client, you probably spend a lot of time on writing. For some people, this work comes naturally, but for others, it can be a chore. Becoming a strong writer takes time and practice. But the benefits are worth the effort. As you improve, you’ll be able to structure and “sell” your ideas more easily and your messages will be better received. Let’s look at some fundamental guidelines you can use to make your writing more powerful and effective.

 

• Learn the importance of thinking before writing   

• Write conversationally     

• Use active voice in your sentences

 

Course code: MUK-118
Course type: E-learning course
Duration: 30 minutes
Language: English
Price: NOK 500,-

Who is the course for?

All personnel who work in the maritime industry and would benefit from an awareness of the International Ship and Port Facility Security (ISPS) Code.

Is previous experience required?

No previous experience is required to complete this course.

How will the course benefit me?

This course aims to provide an overview of the International Ship and Port Facility Security (ISPS) Code.

How will the course benefit my company?

The course will benefit companies by ensuring that all relevant personnel have an understanding of the International Ship and Port Facility Security (ISPS) Code, the security attacks that can occur at sea and how to act in an emergency situation.

What standards are referenced in the course?

International Convention for the Safety of Life at Sea (SOLAS)

The International Ship and Port Facility Security (ISPS) Code

Is there an assessment? 

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.

 

Course code: MTP-063
Course type: E-learning course
Duration: 150 minutes
Language: English, Norwegian
Price: GBP 100,-

Who is this course for?

This FSE High and Low Voltage Training course is suitable for everyone working on low and high voltage installations.

 

Is previous experience required?

You do not need prior knowledge or experience to complete this course, but it is assumed that you are competent in your designated role.

How will this course benefit me?

The course meets the requirements set in Section 7 of the ‘Safety Regulations for Work and Operation of Electrical Equipment and Installations – FSE’ which is that all relevant personnel undertake annual training and instruction in FSE. The course also provides the necessary training and instruction in first aid, focusing on electrical injuries, with the exception of the mandatory practical training in cardiopulmonary resuscitation (CPR).

The regulations of various authorities make FSE applicable to all those working with electricity, whether on board ship, on platforms or on land. This course is suitable for all, regardless of which industry you work in.

The authorities require that training in FSE and first aid in the event of electrical accidents is undertaken at least once a year. No more than 12 months shall elapse between training courses.

 

How will this course benefit my company?

By ensuring you have the knowledge and competence to be working on low and high voltage installations.

 

What standards are referred to in this course?

• Section 7 of the ‘Safety Regulations for Work and Operation of Electrical Equipment and Installations – FSE’

• The European standard

 

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.

Course code: MTP-033
Course type: E-learning course
Duration: 1 hour
Language: Norwegian, English
Price: NOK 1200,-

Who is the course for?

All people exposed to noise in their daily work.


Is previous experience required?

No previous experience is required.


How will the course benefit me?

The purpose of the course is to prevent noise-induced hearing impairment. You will learn how loud sound and noise affect us. You will also learn how you can properly protect yourself against noise and why that is so important.


How will the course benefit my company?

This course will benefit your company be ensuring that you are familiar with the safety precautions you should take in the workplace to protect your hearing.


What standards are referenced in the course?

The course is based on the current rules and regulations for working in areas where there is a risk of being exposed to noise that may be damaging to health.


Is there an assessment?

Yes

Hits per page
| 2 ... |