Course catalogue (PT)

Who is this course for?

All personnel who work with chemicals in the Oil and Gas Industry.

Is previous experience required?

No previous experience is required to complete this course.

How will this course benefit me?

This course provides learners with an in depth few on the use, management and control of chemicals in the Oil and Gas Industry and how to react in an emergency situation that has resulted from a chemical hazard.

How will this course benefit my company?

The course will benefit companies by ensuring that all personnel have an in depth view of industry best practice for working with chemicals, which will in turn, help keep those working with chemicals safe.

What standards are referred to in this course?

• Offshore Petroleum (Oil Pollution Prevention and Control) Regulations

• The Control of Substances Hazardous to Health (COSHH)

• Regulation, Evaluation, Authorisation and Restriction of Chemicals (REACH)

• United Nations Globally Harmonized System of Classification and Labelling of Chemicals (GHS)

• EU Classification, Labelling and Packaging (CLP) Regulation

• The GB CLP Regulation

• The Norwegian CLP Regulation, or

• The Hazard Communication Standard (HCS 2012)

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.

Who is this course for:
All employees working in ISPS-areas.

Is previous experience required?
You do not need prior knowledge or experience to complete this course and it is assumed that you are competent in your designated role

How will this course benefit me?
Basic knowledge of ISPS rules and regulations applicable to international ports and harbours. The course objective is to raise awareness of possible threats to international ports and harbours. Completed course normally gives access to ISPS-areas on harbours.

How will this course benefit my company?
By ensuring you have the knowledge related to ISPS rules and regulatins applicable to international ports and harbours.

What standards are referred to in this course?
ISPS code

Is there an assessment?
Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.

Who is the course for?

All Maritime personnel who work with hand and power tools.

Is previous experience required?

No prior knowledge or experience is required to complete this course.

How will the course benefit me?

This course will provide knowledge on hand and power tool safety.

How will the course benefit my company?

This course is intended to help prevent lost time accidents.

What standards are referenced in the course?

There are no regulations or standards referenced in this course.

Is there an assessment? 

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 70%.

Course goal: This course aims to increase learners’ awareness of the environmental aspects and impacts related to the Oil and Gas Industry and the actions that can be taken to minimise environmental damage.

Learning Objectives

LO1 Identify the main environmental issues that affect the Oil and Gas industry

LO2 Explain the importance of being an environmentally responsible company

LO3 Explain the company’s commitment to managing environmental issues

LO4 Explain the role of ISO 14001 in environmental management

LO5 Explain the role of the Regulator

LO6 Define what is meant by environmental ‘aspects’ and ‘impacts’

LO7 Identify the activities that can contribute towards atmospheric pollution 

LO8 Identify the activities that can contribute towards water pollution

LO9 Identify typical spill sources

LO10 Describe the environmental effects of chemical discharges

LO11Identify the sources and impacts of disturbance of the seabed by the Oil and Gas Industry 

LO12 Identify the sources and impacts of noise from oil and gas operations 

LO13 Identify the activities that can generate waste

LO14 Describe ways in which the impact on the environment can be minimised

LO15 Explain that everyone has a role to play in protecting the environment

Who is this course for?

Personnel requiring an awareness or understanding of common RPE and what they are used for.

Is previous experience required?

You do not need prior knowledge or experience to complete this course.

How will this course benefit me?

This course aims to give personnel an introduction to different types of respiratory protection and describe its use in the workplace.

How will this course benefit my company?

By ensuring you have had an introduction to different types of respiratory protection and describe its use in the workplace.

What standards are referred to in this course?

Health and Safety at Work etc. Act 1974

Management of Health and Safteey at Work Regulations 1999

Control of Substances Hazardous to Health Regulations (COSHH) 2002

Control of Asbestos Regualtions 2012

Control of Lead at Work Regulations 2002

Ionising Radiations Regulations 1999

Confined Space Regulations 1997

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.

Who is this course for?

This eLearning course is aimed at individuals required to work using display screen equipment, such as a computer, laptop or tablet.

Is previous experience required?

No previous experience is required to complete this course.

How will this course benefit me?

This course will give you a basic understanding of the key health risks associated with display screen equipment and what you can do to mitigate them.

How will this course benefit my company?

By ensuring you are fully aware of how to avoid injury while working at your computer, you can help reduce the number of lost workdays and hours due to health issues.

What standards are referred to in this course?

Health and Safety (Display Screen Equipment) Regulations

Is there an assessment?

Yes

Accreditation:

This course is approved by the Institution of Occupational Safety and Health (IOSH).

IOSH is the world’s Chartered body for safety and health professionals.

What that means:

We are the largest membership body for health and safety professionals.

We champion occupational safety and health causes and advocate for change.

We advise governments, NGOs and policymakers.

We facilitate safety and health awareness training in around 130 countries through IOSH Services Ltd, our wholly-owned trading arm.

We commission research and set national and international standards.

We shape the future of the profession.

Who is this course for?
All relevant personnel.

Is previous experience required?
You do not need prior knowledge or experience to complete this course.

How will this course benefit me?
This course aims to provide an overview of best practice in relation to drug and alcohol awareness in the workplace.

How will this course benefit my company?
This course provides drug and alcohol awareness, information on company policies, and the effects of alcohol abuse, illegal drug use, and the abuse of prescription drugs.

What standards are referred to in this course?
N/A

Is there an assessment?
Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 70%.

Course Goal:

This course aims to provide an overview of US best practice in relation to the classification and labeling of chemicals.

Learning Objectives:

 LO1 Give an overview of the purpose and goals of the OSHA requirements for the classification and labeling of chemicals

LO2 Explain physical, health, and environmental hazards

LO3 Give an overview of the information that may be contained on a chemical label

LO4 Identify the Globally Harmonized System of Classification and Labeling of Chemicals (GHS) pictograms

LO5 Identify the differences between transport pictograms and GHS pictograms

LO6 Describe hazard statements, precautionary statements and signal words

LO7 Explain the purpose of Safety Data Sheets

LO8 Give an overview of the information that may be contained on a Safety Data Sheet

LO9 Identify that not all chemicals will have a Safety Data Sheet

Who is this course for?
All relevant personnel.

Is previous experience required?
You do not need prior knowledge or experience to complete this course and it is assumed that you are competent in your designated role

How will this course benefit me?
This course aims to provide you with an awareness of bloodborne pathogens, common modes of transmission, methods of prevention, and what to do if exposure occurs.

How will this course benefit my company?
By ensuring you are aware of the bloodborne pathogens, common modes of transmission, methods of prevention, and what to do if exposure occurs.

What standards are referred to in this course?
N/A

Is there an assessment?
Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.

Who is this course for?

Personnel who require an introduction to or awareness of working in cold climates.

Is previous experience required?

You do not need prior knowledge or experience to complete this course.

How will this course benefit me?

Working in cold environments can be a significant challenge for comfort and the ability to perform work tasks in a safe and efficient manner. 

How will this course benefit my company?

By ensuring you have are aware of the challenges to perform work tasks in cold environments. 

What standards are referred to in this course?

This course does not refer to specific legislation or standards but is written according to industry best practice.

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 70%.

Course Goal: To provide learners with an awareness of the environmental impacts associated with the use and discharge of chemicals in the Oil and Gas Industry and the legislation and control measures that are in place to minimise the impact on the environment.

Target Audience: All relevant personnel

Learning Objectives

LO1 Explain the purpose of chemical use in the Oil and Gas Industry

LO2 Give examples of the types of chemicals used in the Oil and Gas Industry

LO3 Explain how chemicals can enter the environment 

LO4 Give an overview of the potential environmental impacts of chemical use and discharge

LO5 Identify the legislative requirements governing the use of chemicals 

LO6 Identify the type of chemical permit applications required for different operations

LO7 Identify the actions to take in the event of a chemical spill

LO8 Give examples of how to ensure compliance with legislative requirements

LO9 Explain good practice in relation to the storage of chemicals

LO10 Detail the different control measures that can be implemented to reduce potential environmental risk

LO11 Explain how to correctly dispose of chemicals after use

Who is this course for?

Ship Officers

Is previous experience required?

Documented 12 months seaservice as an officer onboard an ISPS vessel.

How will this course benefit me?

After successfully completing this course, you should be able to undertake the duties and responsibilities of a Ship Security Officer, as defined in section A/12.2 of the ISPS Code and in section A-VI/5 of the STCW Code. The course enables you to maintain and supervise the implementation of the Ship Security Plan, evaluate the security risk, threat and vulnerability, make regular inspections to ensure that appropriate safeguards are implemented and maintained, and ensure that the security systems are operated, tested and calibrated correctly.

How will this course benefit my company?

By ensuring you are qualified and certified as a Ship Security Officer (SSO).

What standards are referred to in this course?

STCW A-VI/5 and ISPS code section A/12.2.

The course is approved by the Norwegian maritime Authority. Approved certificate as Ship Security Officer will be issued upon course completion.

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 70%.

This course is a combined training consisting of: Elearning and onboard training (exercises and checklists).

To complete the course, it is required that you are employed by a company which has a plan for onboard training with these kind of activities.

The course will not be approved for any persons without a connection to a company as described above.

Certificate:

When the training is completed a certificate is issued by the Norwegian Maritime Authority.

The Norwegian Maritime Authority charge an additional fee to issue the formal STCW Certificate.

Who is the course for?

All personnel who work with machinery, tools and appliances.

Is previous experience required?

No previous experience is required to complete this course.

How will the course benefit me?

This course aims to provide learners with an awareness of the requirements of the Provision and Use of Work Equipment Regulations (PUWER) and how they apply in the workplace.

How will the course benefit my company?

This course will benefit companies’ by providing personnel with an awareness of PUWER.

What standards are referenced in the course?

Provision and Use of Work Equipment Regulations (PUWER)

Health and Safety at Work Act

Management of Health and Safety at Work Regulations

Is there an assessment?

Yes

Accreditation

This course is approved by the Institution of Occupational Safety and Health (IOSH).

IOSH is the world’s Chartered body for safety and health professionals.

What that means:

• We are the largest membership body for health and safety professionals.

• We champion occupational safety and health causes and advocate for change.

• We advise governments, NGOs and policymakers.

• We facilitate safety and health awareness training in around 130 countries through IOSH Services Ltd, our wholly-owned trading arm.

• We commission research and set national and international standards.

• We shape the future of the profession.

Who is this course for?
This course is aimed at all personnel involved in mechanical isolations.

Is previous experience required?
No previous experience is required to complete this course.

How will this course benefit me?
This course aims to provide all relevant personnel with an overview of best practices in mechanical isolations.

How will this course benefit my company?

The course will benefit companies by ensuring that all relevant personnel have an understanding of mechanical isolation best practices, which will reduce accidents and injuries at work.

What standards are referred to in this course?
The United Kingdom’s UK’s Health and Safety Executive’s Regulation 253 ‘The safe isolation of plant and equipment’.

Is there an assessment?
Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.

Who is this course for?

Any personnel who require knowledge of Legionella bacteria.

Is previous experience required?

No previous experience is required to complete this course.

How will this course benefit me?

By providing personnel with an overview of the steps that can be taken to reduce the risks posed by Legionella in the workplace.

How will this course benefit my company?

By providing personnel with an overview of you to identify the risks associated with Legionella and the control measures that can be implanted to reduce those risks.

What standards are referred to in this course?

This course does not refer to specific legislation or standards.

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.

Accreditation:

This course is approved by the Institution of Occupational Safety and Health (IOSH).

IOSH is the world’s Chartered body for safety and health professionals.

What that means:

We are the largest membership body for health and safety professionals.

We champion occupational safety and health causes and advocate for change.

We advise governments, NGOs and policymakers.

We facilitate safety and health awareness training in around 130 countries through IOSH Services Ltd, our wholly-owned trading arm.

We commission research and set national and international standards.

We shape the future of the profession.

Who is the course for?  

This course is for those who are involved with Control of Work at a work site, specifically Performing Authorities.  

Is previous experience required? 

You do not need prior knowledge or experience to complete this course.  

How will the course benefit me? 

This course is designed to provide you with a comprehensive understanding of the key elements of a Safe System of Work (SSOW)} and demonstrate how understanding and following a Safe System of Work contributes to successful control of work.  

How will the course benefit my company? 

This course aims to ensure that all personnel have a consistent and common understanding of, and approach to Control of Work.  

What standards or regulations are referenced in the course? 

• The Health and Safety at Work Act 

• The Management of Health and Safety at Work Regulations 

• The Offshore Installations and Pipeline Works (Management and Administration) Regulations 

• The Control of Substances Hazardous to Health Regulations (COSHH), and 

• HSG 250 and 253 

• Electricity at Work Regulations 

• Provision and Use of Work Equipment Regulations (PUWER) 

• Lifting Operations and Lifting Equipment Regulations (LOLER) 

• Manual Handling Operations Regulations 

• Personal Protective Equipment at Work Regulations 

• Work at Height Regulations 

• Control of Vibration at Work Regulations 

• Control of Noise at Work Regulations, and 

• Confined Spaces Regulations  

Is there an assessment? 

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.

Course Goal: This course aims to provide an overview of personal security risks, information security risks and site security risks and their associated risk reduction methods

Learning Objectives:

LO1 Define ‘security’ and identify the different types of security

LO2 Identify personal security risks and associated risk reduction methods

LO3 Identify common information security risks

LO4 Describe typical information security risk reduction methods

LO5 Identify common site security risks

LO6 Describe typical site security risk reduction methods