Kurskatalog

Who is this course for?
All personnel involved in rigging and lifting operations

Is previous experience required?
No previous experience is required to complete this course.

How will this course benefit me?
This course will provide you with an overview of rigging and lifting operations.

How will this course benefit my company?

This course will provide personnel with an overview of rigging and lifting operations.

What standards are referred to in this course?

• The Lifting Operations and Lifting Equipment Regulations (LOLER) 

• The Provision and Use of Work Equipment Regulations (PUWER) 

• The Safe Use of Lifting Equipment: Approved Code of Practice (ACOP)

• Lifting Equipment at Work Guidance

• The Personal Protective Equipment at Work Regulations

Is there an assessment?
Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.

Course Goal:

This course aims to provide learners of an awareness of US best practice in relation to confined space entry (CSE), hazardous atmospheres, and the necessary equipment, and permits required to work in confined spaces.

It will also examine the hazards and hazard control methods that are required to undertake work safely in a confined space and the actions that should be taken in an emergency.

Learning Objectives

LO1  Explain what is meant by a Confined Space

LO2  Give examples of Confined Spaces

LO3 Describe the dangers that can be caused by confined space entry work 

LO4 Identify OSHA requirements for permit-required entry operations

LO5 Explain how to avoid entering confined spaces

LO6 Explain the importance of having a Safe System of Work in place

LO7 Describe individual roles and responsibilities involved in Confined Space Entry work 

LO8 Explain the requirements for gas testing

LO9 Identify acceptable levels for atmospheric test results 

LO10  Give examples of Confined Space Entry site safety equipment

LO11  Explain the actions to take in an emergency 

LO12  Explain Confined Space Entry alarm procedures

Kurset er kun tilgjengelig på engelsk.

Hensikten med kurset er å gi relevant personell den kunnskapen som kreves for å forstå farer og risiko involvert ved bruk av slipeskiver.

Etter fullført kurs skal brukeren kunne:
- Hva som menes med begrepet slipeskive
- Kravene som gjelder ved bruk av vinkelsliper (slipeskiver)
- Gi eksempler på ulike typer slipeskiver
- Vite hvordan en vinkelsliper fungerer
- Vite betydningen av å bruke vakter under slipeoperasjoner
- Kravene knyttet til bærbare og håndholdte slipemaskiner
- Forklare de viktigste farene ved slipearbeid
- Gi eksempler på vanlige problemer ved bruk av vinkelsliper
- Kravene til personlig verneutstyr ved bruk av vinkelsliper
- Sikkerhetstiltak som må være på plass ved operasjoner som innebærer bruk av vinkelsliper

Kurset er kun tilgjengelig på engelsk. 

Who is the course for?

All personnel who require an awareness of the hazards involved in working at height.

Is previous experience required?

No previous experience is required to complete this course.  

How will the course benefit me?

By increasing your awareness of the potential hazards of working at height and the steps that can be taken to reduce your risk of injury.

How will the course benefit my company?

This course is aligned to industry best practice and aims to make personnel aware of the potential hazards of working at height and the controls that can be implemented to reduce risk.

What standards are referenced in the course?

Work at Height Regulations

Assessment Details

Pass mark is 100% with unlimited attempts. 

FAST TRACK is a learning method which provides you with bespoke learning content by identifying any knowledge gaps you may have in a particular subject area.

FAST TRACK is a pre-assessment learning tool which is designed to assess your existing knowledge of a particular subject area. The pre-assessment uses a pool of questions to test your current knowledge. The results of this assessment help identify your personal knowledge gaps. FAST TRACK then automatically creates a bespoke course to address these knowledge gaps.

Who is this course for?

Personnel who are required to work with Piping and Instrumentation Diagrams.

Is previous experience required?

No previous experience is required to complete this course.

How will this course benefit me?

This course will enable you to describe the information provided in a P&ID and explain why this information is useful.

How will this course benefit my company?

Personnel who are able read and understand the information provided in P&IDs are better able to troubleshoot system problems.

What standards are referred to in this course?

• Institute de Algerian Normalisation

• Standards Association of Zimbabwe

Is there an assessment?

Once you have completed each section of the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the section and have a pass mark of 80%.

Who is this course for?

All employees at all levels of the organisation.

Is previous experience required?

You do not need prior knowledge or experience to complete this course.

How will this course benefit me?

Insufficient understanding of risk often leads to delayed projects, accidents and other unwanted incidents.

This course provides a basic understanding of what risk is, how it can be managed and how understanding risk helps us make better decisions.

How will this course benefit my company?

By ensuring you are aware and have a basic understanding of what risk is and how to manage risk. 

What standards are referred to in this course?

This course does not refer to specific legislation or standards but is written according to industry best practice.

Is there an assessment?

There is no exam upon completion of this course.

Who is this course for?

Personnel requiring an understanding & awareness of the role of a fire warden or have recently been allocated this role or require a refresher.

Is previous experience required?

You do not need prior knowledge or experience to complete this course.

How will this course benefit me?

This course aims to provide Fire Wardens with an overview of the knowledge that they need to carry out their duties safely and effectively in line with industry best practice

How will this course benefit my company?

By ensuring you have the knowledge needed to carry out  duties safely and effectively in line with industry best practice

What standards are referred to in this course?

Health and Safety at Work Act

The Fire (Scotland) Act

The Regulatory Reform (Fire Safety) Order

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.

Kurset er kun tilgjengelig på engelsk. 

Who is this course for?

This course is aimed at all personnel involved in mechanical joint operations, particularly those who are expected to undertake related duties in the workplace.

Is previous experience required?

You do not need prior knowledge or experience to complete this course and it is assumed that you are competent in your designated role

How will this course benefit me?

This course aims to provide learners with an introduction to the principles of the equipment and technology associated with the bolting of flanged joints for pressurised systems. This course is intended to reflect industry """"best practice"""" for competence in relation to mechanical joint operations and applies to both the onshore and offshore Oil and Gas Industry.

This course contains the following sections:

Section 1: An Introduction to Mechanical Joint Integrity

Section 2: Principles of Hand Torquing

Section 3: Principles of Hydraulic Tensioning

Section 4: Principles of Controlling Tightening

How will this course benefit my company?

By ensuring you are introduced  to the  principles of the equipment and technology associated with the bolting of flanged joints for pressurised systems

What standards are referred to in this course?

N/A

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.

Course Goal:

This course provides learners with an awareness of US best practice in relation to working at height and fall protection.

Learning Objectives:

LO1 Identify when fall protection is required

LO2 Identify the legislative and regulatory requirements for fall protection that help to control work at height

LO3 Explain the duties that are placed on employers and employees

LO4 Describe the hazards involved in working at height

LO5 Explain the importance of planning and risk assessment

LO6 Describe the hierarchy of control for managing and selecting fall protection equipment 

LO7 Identify the factors that should be considered when assessing fall protection methods

LO8 Describe the main methods of access for working at height and give examples of the different types of fall protection equipment

LO9 Describe the rules for working with ladders

LO10 Describe the rules for working with scaffolds

LO11 Explain the importance of inspecting equipment

LO12 Explain how to correctly use a safety harness

Kurset er kun tilgjengelig på engelsk.

FAST TRACK lar brukeren først ta en pre-test for å kartlegge sine eksisterende kunnskaper innen temaet. Basert på resultatene fra pre-testen vil FAST TRACK deretter automatisk opprette et skreddersydd kurs som er tilpasset kunnskapsnivået som blir avdekket i pre-testen.

Hensikten med kurset er å øke bevisstheten rundt miljømessige aspekter og konsekvenser knyttet til olje- og gassindustrien og hva man kan gjøre for å minimere miljøskader.

Etter fullført kurs skal brukeren kunne:
- De viktigste miljøspørsmålene som påvirker olje- og gassindustrien
- Viktigheten av å være et miljøbevisst selskap
- Forklare selskapets forpliktelse når det gjelder å håndtere miljøspørsmål
- Rollen til ISO 14001
- Rollen til “Department of Energy and Climate Change (DECC)”
- Hva som menes med miljøaspekter og påvirkninger
- Vite hvilke aktiviteter som kan bidra til atmosfærisk forurensning
- Vite hvilke aktiviteter som kan bidra til vannforurensning
- Identifisere typiske utslippskilder
- Beskrive miljøeffekter av et kjemikalieutslipp
- Kilder til havbunnsforstyrrelser fra olje og gassvirksomhet og hvilke konsekvenser av dette kan medføre
- Støykilder fra olje- og gassvirksomhet og hvilke konsekvenser dette kan medføre
- Identifisere aktiviteter som kan generere avfall
- Vite hvordan virkningen på miljøet kan minimeres
- Vite alle har en rolle å spille i å beskytte miljøet

Kurset er kun tilgjengelig på engelsk. 

Who is this course for?

Personnel requiring an awareness or understanding of the role of Banksmen and Slingers.

Is previous experience required?

You do not need prior knowledge or experience to complete this course.

How will this course benefit me?

This course aims to give an overview of the roles of the Banksman and Slinger

How will this course benefit my company?

To ensure you have an overview of the roles of the Banksman and Slinger

What standards are referred to in this course?

This course does not refer to specific legislation or standards but is written according to industry best practice.

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.

Kurset er kun tilgjengelig på engelsk.

Course Goal:

This course aims to increase the learner's awareness of US best practice in relation to Personal Protective Equipment (PPE), and outline the responsibilities of employers and personnel in relation to PPE.

Learning Objectives

Section 1: The Importance of PPE

LO1 Define what is meant by Personal Protective Equipment (PPE)

LO2 Identify the regulations surrounding the use of PPE

LO3 Describe the Hierarchy of Control measures

LO4 Describe the duties and responsibilities of employers in relation to PPE

LO5 Explain the importance of PPE-related training, information and instruction 

LO6 Describe the responsibilities of personnel in relation to PPE

Section 2: Types of PPE

LO7 Identify the different types of PPE 

LO8 Describe how to select, use and maintain different types of PPE

Section 3: PPE Requirements

LO9 Identify different types of Respiratory Protective Equipment (RPE)

LO10 Explain the requirements for face fit testing

LO11 Explain the requirements for the use of fall protection

LO12 Explain the requirements for assessing the suitability and compatibility of PPE

LO13 Describe the four levels of PPE protection

LO14 Explain the importance of proper donning and doffing techniques

Kurset er kun tilgjengelig på engelsk.

Who is the course for?

This course is for any person who interacts with, or is responsible for, the specification, design, operation and maintenance of assets that employ safety instrumented systems.

Is previous experience required?

No previous experience is required to complete this course.

How will the course benefit me?

This course will provide you with an awareness of the purpose and nature of safety systems deployed to protect people, the environment and plant in the areas that you work.

How will the course benefit my company?

By ensuring personnel have an understanding of safety instrumented systems.

What standards are referenced in the course?

IEC 61508

IEC 61511

IEC 62061

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.

Course Goal:

This course aims to provide learners with an overview of US best practice in relation to incident reporting and investigation.

Learning Objectives:

LO1 Define what is meant by the terms ‘incident’, ‘accident’ and ‘near miss’ 

LO2 Explain the purpose of, and reasons for, incident reporting and investigation

LO3 Outline the key roles and responsibilities involved in reporting and investigating an incident

LO4 Explain how to determine the appropriate level of investigation using an incident severity risk assessment

LO5 Identify the key steps involved in a typical incident investigation process

LO6 Describe the requirement for analysis of the causes of the incident

LO7 Describe Root Cause Analysis (RCA)

LO8 Describe how to identify suitable control measures 

LO9 Describe the requirement for an incident action plan and its implementation using SMART principles

Dette kurset er kun tilgjengelig på engelsk.

Who is the course for?

All relevant offshore personnel.

Is previous experience required?

No previous experience is required to complete this course. 

How will the course benefit me?

This course aims to give offshore personnel the knowledge required to understand the hazards and controls associated with working in an environment where they could potentially be exposed to H2S.

How will the course benefit my company?

By ensuring you are aware of the hazards and controls associated with H2S exposure, which will in turn reduce incidents and accidents offshore.

What standards are referenced in the course?

• Health and Safety at Work Act 1974

• Offshore Installations (Safety Case) Regulations 2005

• Offshore Installations (Prevention of Fire and Explosion, and Emergency Response) Regulations 1995 (PFEER)

• Offshore Installations and Wells (Design and Construction) Regulations 1996

• CoSHH 2002

• EH40 Workplace Exposure Limits (WELs) 

Assessment Details

FAST TRACK is a learning method which provides you with bespoke learning content by identifying any knowledge gaps you may have in a particular subject area. 

FAST TRACK is a pre-assessment learning tool which is designed to access your existing knowledge of a particular subject area. 

•The pre-assessment uses a pool of questions to test your current knowledge

•The results of this assessment help identify your personal knowledge gaps

•FAST TRACK then automatically creates a bespoke course to address these knowledge gaps

•You will ONLY be given content on any knowledge gaps identified in the pre-assessment

•Your knowledge and understanding is then re-assessed

Who is this course for?

Personnel involved with mechanical material handling equipment and operation, crane operation, rigging, supervision and signalling related activities. 

Is previous experience required?

You do not need prior knowledge or experience to complete this course and it is assumed that you are competent in your designated role

How will this course benefit me?

To provide learners with an awareness of industry best practice for working with cranes

This course consists of 4 sections:

Section 1: Introduction to Crane Operations

Section 2: Cranes and Lifting Equipment

Section 3: Planning a Lift

Section 4: Carrying out a Lift

How will this course benefit my company?

By ensuring you are aware of industry best practice for working with cranes 

What standards are referred to in this course?

• The Lifting Operations and Lifting Equipment Regulations (LOLER) 

• The Provision and Use of Work Equipment Regulations (PUWER) 

• The Safe Use of Lifting Equipment: Approved Code of Practice (ACOP)

• Lifting Equipment at Work Guidance

• Personal Protective Equipment at Work Regulations

• Health and Safety at Work Act s.16

• Management of Health and Safety at Work Regulations

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.

Who is this course for?

Personnel who require an awareness and understanding of well integrity.

Is previous experience required?

You do not need prior knowledge or experience to complete this course.

How will this course benefit me?

This course aims to provide learners with an introduction to well integrity and its importance for maintaining safe and secure operations

How will this course benefit my company?

By ensuring you are introduced  to well integrity and its importance for maintaining safe and secure operations

What standards are referred to in this course?

This course does not refer to specific legislation or standards but is written according to industry best practice.

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.

À l'issue de ce cours, vous devriez pouvoir :

• Expliquer l'importance de l'identification des dangers

• Donner des exemples de dangers industriels courants

• Identifier les dangers inhérents au lieu de travail, et

• Comprendre l'importance des mesures de contrôle dans la limitation des risques provenant de dangers

Who is the course for?

All personnel involved in the transportation or supporting of a load by hand or bodily force.

Is previous experience required?

No previous experience is required to complete this course. 

How will the course benefit me?

The aim of this course is to increase learners’ awareness of the importance of safe manual handling operations and the risks involved with manual handling. The course also aims to outline best practices for the correct handling techniques for safe lifting; and for the pushing and pulling of loads.

How will the course benefit my company?

This course will benefit your company by reducing manual handling accidents.

What standards are referenced in the course?

• The Manual Handling Operations Regulations

• The Management of Health and Safety at Work Regulations

• Health and Safety at Work Act

• Health and Safety Executive (HSE)

Is there an assessment?

Course assessment with a 100% pass mark and unlimited attempts

FAST TRACK is a pre-assessment learning tool which is designed to assess your existing knowledge of a particular subject area.

The pre-assessment uses a pool of questions to test your current knowledge.

The results of this assessment help identify your personal knowledge gaps.

FAST TRACK then automatically creates a bespoke course to address these knowledge gaps.

You will ONLY be given content on any knowledge gaps identified in the pre-assessment.

Your knowledge and understanding is then re-assessed.

Who is the course for?

All personnel involved in the transportation or supporting of a load by hand or bodily force.

Is previous experience required?

No previous experience is required to complete this course. 

How will the course benefit me?

The aim of this course is to increase learners’ awareness of the importance of safe manual handling operations and the risks involved with manual handling. The course also aims to outline best practices for the correct handling techniques for safe lifting; and for the pushing and pulling of loads.

How will the course benefit my company?

This course will benefit your company by reducing manual handling accidents.

What standards are referenced in the course?

• The Manual Handling Operations Regulations

• The Management of Health and Safety at Work Regulations

• Health and Safety at Work Act

• Health and Safety Executive (HSE)

Assessment Details

Course assessment with an 80% pass mark and two attempts.