Course catalogue

Presentation

This training course describes the various elements of the ship's structure, the loads acting on the structure and the required strength of the ship's structure to sustain such loads.

Objectives

On completion of the training, students will be able to:

Know the typical structural arrangements of different ship types. Understand stiffened panels as the fundamental structural units in ship structures and know the different framing systems used in ship construction

Know the different types of loads acting on the ship's structure and understand the static sea pressure and the wave induced dynamic sea pressure. Understand the concept of net loading on the ship's structure, shear forces and bending moments. Get familiar with fatigue loads

Understand the stresses on ship's structure including longitudinal stresses on hull girder, stresses on primary supporting structure and local stresses and the strength of the ships structure. Get familiar with fatigue strength and understand the corrosion and the net scantling approach.

Program

Module 1 – Elements of Ship Structure

Main ship types

Materials used in shipbuilding

Structural elements: Plating, profiles, stiffened panels, midship section, web frame

Framing systems: Longitudinal framing, mixed framing, transverse framing

Breakdown of ship structures: Double bottom, side shell, deck, bulkheads, engine room structure, peak tanks

Module 2 – Loads on Ship Structure

Classification of loads acting on ship structure

Static and dynamic loads

Sea pressure

Internal loads

Net load on structure

Bending moment and shear force

Alternate loading condition

Module 3 – Strength of Ship Structure

Ship structural strength

Stress classification

Spreading of loads through the ships structure

Hull girder strength

Strength of primary structure

Finite element modelling analysis

Strength of plates and stiffeners: Stress check, section modulus, buckling strength

Fatigue strength

Corrosion of ship's structure, consequences of general corrosion

Net scantling approach

Certificate

On completion of the training program, the student will be awarded:

A Certificate of Ship's Structure Fundamentals, issued by Bureau Veritas Solutions Marine & Offshore.

The Certificate of Ship's Structure Fundamentals is obtained after completing the course and passing the online test.

Presentation

This training course composed of 2 modules provides an overview of the requirements of the Ballast Water Management International Convention and the technical aspects related to the ballast water treatment equipment.

Objectives

On completion of the training, students will be able to:

Understand the background of the Ballast Water Management Convention, its structure and the most important regulations

Know the difference between the ballast water exchange and the performance standards

Understand the role of all stakeholders and actors

Be familiar with the approval, inspections, commissioning and tests of Ballast Water

Management systems

Understand the survey and certification requirements

Be familiar with the different technologies used and the installation requirements

Program

Module 1 – BWM Regulatory Aspects

Background

The Ballast Water Management Convention

Duties of the main stakeholders 

Ballast Water Management Standards

USCG Position 

Module 2 – BWM Technical Aspects

BWM Surveys

International Ballast Water Management Certificate

BWM System Approval

Sampling

Ballast water treatment systems technologies

Ballast water treatment systems installation

Certificate

On completion of the training program, the student will be awarded:

A Certificate of Ballast Water Management, issued by Bureau Veritas Solutions Marine & Offshore.

The Certificate of Ballast Water Management is obtained after completion of the course and passing the online test. 

Presentation

This training course provides an overview of the IACS Recommendation 47 – Shipbuilding and Repair Quality Standards.

Objectives

On completion of the training, students will be able to:

Understand the applicability of IACS Recommendation No.47.

Get familiar with materials, welding and non-destructive testing. 

Understand the quality standards for steel ship construction and remedial standards for new buildings. 

Understand the quality standards for repair of ships in operation.

Program

General requirements for new constructions and repair of ships in operation

Qualification of welders, welding procedures and NDT operators

Materials

Equivalency of material grades

Surface conditions and acceptance criteria

Shipbuilding and remedial quality standards for new constructions

o Standard for flanged longitudinals and flanged brackets

o Standard for corrugated bulkheads

o Standard for pillars, brackets and stiffeners

o Standard for hull shape

o Standard for fairness of plating between frames

o Standard for alignment and remedial standard for misalignment

o Standard for butt weld plate edge preparation and remedial standard

o Standard for fillet weld plate edge preparation and remedial standard

o Standard for distance between welds

Repair quality standards for ships in operation

o Standard for welding, groove roughness

o Standard for renewal of plates

o Standard for doublers on plating

o Standard for renewal of internals/stiffeners

o Standard for welding of pitting corrosion

o Standard for welding repair of cracks

Certificate

On completion of the training program, the student will be awarded:

A Certificate of Shipbuilding and Repair Quality Standards, issued by Bureau Veritas Solutions Marine & Offshore.

The Certificate of Shipbuilding and Repair Quality Standards is obtained after completion of the course and passing the online test.

Provided in association with Astutis, NEBOSH Learning Partner 807.

The NEBOSH International Diploma in Occupational Health and Safety is an advanced health and safety qualification. Equivalent to an undergraduate degree in OHS. The NEBOSH Diploma is NEBOSH's flagship qualification. It is recognised by employers and professional bodies in over 180 countries around the world!

The qualification will develop competence in all areas of health and safety so you can reduce risk in dangerous environments and keep people safe. It is the ideal course if you want a successful, long-term career in health and safety.

Unit A: Managing Health and Safety

This unit provides an in-depth understanding of the key areas for managing health and safety, covering moral, economic and societal drivers, health & safety law and health & safety management systems. 

A1 - Principles of health & safety management

A2 - Principles of health & safety law

A3 - Criminal Law

A4 - Civil Law

A5 - Loss causation and incident investigation

A6 - Measuring and reviewing health and safety           

A7 - Identifying hazards, assessing and evaluating risk

A8 - Risk control

A9 - Organisational factors

A10 - Human factors

A11 - The role of health & safety practitioner

Unit B: Hazardous Agents in the Workplace

Unit B details all major aspects of managing chemical, biological, physical and physiological hazards in the workplace.

B1 - Managing Occupational Health

B2 - Identification, assessment & evaluation of hazardous substances

B3 - Control of hazardous substances

B4 - Monitoring and measuring

B5 - Biological agents

B6 - Physical agents - noise and vibration

B7 - Physical agents - radiation

B8 - Mental ill-health & dealing with violence & aggression at work

B9 - Musculoskeletal risks and controls

B10 - Work environment risks and controls

Unit C: Workplace and Work Equipment Safety

Unit C provides a thorough understanding of how to create and manage safe working environments, covering welfare, fire, dangerous substances, work equipment, electricity, construction and transport. 

C1 - Workplace welfare requirements and specific workplace issues

C2 - Fire and explosion

C3 - Workplace fire risk assessment

C4 - Storage, handling and processing of dangerous substances

C5 - Work equipment (general)

C6 - Work equipment (workplace machinery)

C7 - Mobile, lifting, access and work at height equipment

C8 - Electrical safety 

C9 - Construction & works of a temporary nature - hazards and controls

C10 - Workplace transport and driving for work

Provided in association with Astutis, NEBOSH Learning Partner 807.

The NEBOSH International General Certificate in Occupational Health and Safety (IG) is one of the leading health and safety qualifications recognized globally.  It helps develop your understanding of general workplace issues and how they can be applied in different sectors around the world.

The new NEBOSH International Certificate focuses on the role of a real-life health and safety professional. It looks at the real, everyday risks that people encounter and how to manage them to help protect people and profits. 

You'll develop the essential risk management skills to create a safe and healthy workplace. And, you’ll have the foundation knowledge to make recommendations to your employer to help them improve health and safety management.

Upon completion of this course, learners will be able to:

• Justify health and safety improvements using moral, financial and legal arguments

• Advise on the main duties for health and safety in the workplace and help their organisation manage contractors

• Work within a health and safety management system, recognising what effective policy, organisational responsibilities and arrangements should look like

• Positively influence health and safety culture and behaviour to improve performance in their organisation

• Do a general risk assessment in their own workplace – profiling and prioritising risks, inspecting the workplace, recognising a range of common hazards, evaluating risks (taking account of current controls), recommending further control measures, planning actions

• Recognise workplace changes that have significant health and safety impacts and effective ways to minimise those impacts

• Develop basic safe systems of work (including taking account of typical emergencies) and knowing when to use permit-to-work systems for special risks

• Take part in incident investigations

• Help their employer to check their management system effectiveness – through monitoring, audits and reviews

Course goal: This course aims to provide all relevant personnel with an overview of best practices in Mechanical Isolations

Course Sections:

1. Introduction to Mechanical Isolations

2. Roles and Responsibilities

3. Safety Critical Manual Valves (SCMVs)

4. Planning Isolations

5. Performing Isolations

6. Isolation Security

7. HP/LP Systems

8. Reinstatement of Plant

Doel van de cursus: Deze cursus is erop gericht al het relevante personeel een overzicht te geven van de beste praktijken inzake mechanische isolaties

Cursusdelen:

1. Introductie tot mechanische isolaties

2. Functies en verantwoordelijkheden

3. Handbediende veiligheidskritische kleppen (HVKK's)

4. Isolaties plannen 

5. Isolaties uitvoeren

6. Isolatiebeveiliging

7. HD/LD-systemen

8. Herplaatsing van installatie

Ce cours est conçu pour :

• Présenter les grandes lignes du processus d'Évaluation de l'impact environnemental (EIA)

• Décrire les contrôles législatifs en vigueur concernant l'EIA 

• Identifier les projets pour lesquels une Déclaration environnementale (ES) est obligatoire, et quand une révision d'une ES existante peut être nécessaire

• Identifier les activités pour lesquelles une Orientation de l'EIA peut être requise, plutôt qu'une ES

• Identifier les activités qui sont « exclues » et qui n'exigent ni ES ni Orientation de l'EIA

• Décrire les différentes étapes du processus d'EIA et identifier les types de consultations qui doivent être effectuées

• Identifier les zones qui doivent être soigneusement étudiées afin de déterminer l'impact potentiel sur leur environnement, et

• Connaître les délais pour mener une ES ou une Orientation de l'EIA

Presentation 

This training course provides a general overview of the requirements of the AFS Convention and the anti-fouling systems used for new constructions and during ships operational life.

Objectives

On completion of the training, students will be able to: 

Understand the aim of the anti-fouling systems and their impact on the environment. 

Know the requirements of the AFS Convention. 

Be familiar with the applicable documentation and related certificates. 

Program 

What is fouling and how do anti-fouling systems work 

Influence on the environment 

Composition of anti-fouling systems 

The AFS Convention and regulations 

Applicability of AFS Convention for new and existing ships 

Regulation (EC) No. 782/2003 

Survey and certification 

o Types of surveys 

o Scope of Initial surveys for new and existing ships 

o Other surveys 

o Certificate issuance 

o The validity of the IAFS Certificate 

o Type approval certificates

Certificate 

On completion of the training program, the student will be awarded the following qualifications:

Certificate of Anti-Fouling Systems awarded by Bureau Veritas Solutions Marine & Offshore.

The Certificate of Anti-Fouling Systems, issued by Bureau Veritas Solutions Marine & Offshore, is obtained after completing the course and passing the qualification examination.

Presentation

This training course aims at providing an overview of the Port State Control background, organisation and procedures. It includes a description of the Port State Control inspection process, the criteria for selection of ships for inspection and the most common detainable deficiencies.

Objectives

On completion of the training, students will be able to:

Know the background and organisation of the various Port State Control regimes around the world

Understand the Port State Control procedures, the criteria for selection of ships for inspection and the inspection process

Know the various publications issued regularly by the different Port State Control regimes 

Get familiar with the most common deficiencies which may lead to ship’s detention

Program

PSC background and organisation

Purpose

Regulations

Regional Port State Control organisations

PSC procedures

Relevant instruments

Selection of ships for inspection

Inspection and selection scheme – Scope, priority and frequency of inspection

Paris MOU – New Inspection Regime (NIR) factors

PSC inspection process

Initial inspection

Clear grounds for more detailed inspection

More detailed inspection

Ship detention

Banning of ships

Publication of information

Detainable deficiencies

Examples of detainable deficiencies

Under SOLAS Convention

Under Load Lines Convention

Under MARPOL Convention

Under Chemical and Gas Codes

Under STCW Convention

Under ILO Conventions

Statistics from various PSCs

Certificate

On completion of the training program, the student will be awarded: 

A Certificate of Port State Control, issued by Bureau Veritas Solutions Marine & Offshore.

The Certificate of Port State Control is obtained after completion of the course and passing the online test.

Presentation

This training course provides a general introduction to the most important maritime regulatory bodies: the International Maritime Organisation (IMO), the International Association of Classification Societies (IACS) and the European Maritime Safety Agency (EMSA).

Objectives

On completion of the training, students will be able to:

Understand the mission and structure of IMO, know the IMO requirements and the main International Conventions, and understand the process of acceptance, adoption and implementation of International Conventions.

Know the history of IACS and its mission, understand the IACS organization and the role of each entity, and know the main types of documents issued by IACS and how they are implemented.

Understand the European context, the role of the European Maritime Safety Agency (EMSA), and know the key points of the EU Regulation on common standards for ship inspection and survey organisations.

Program

Module 1 – IMO

IMO Mission

IMO History

IMO Organisation

IMO Regulations

Implementation of IMO Regulations

IMO Technical Assistance

Module 2 – IACS

IACS History

IACS membership evolution and current members

Membership criteria

The mission of Classification Societies and what Classification Societies do not do

IACS aims

IACS values – Leadership, technical knowledge, quality performance, transparency

IACS Organisation

Work programme and work process

IACS Panels

IACS main documents

Module 3 – EMSA

The European context

EMSA purpose and mission

EMSA structure

Regulation (EC) No 391/2009 

Certificate

On completion of the training program, the student will be awarded:

A Certificate of Maritime Regulatory Bodies, issued by Bureau Veritas Solutions Marine & Offshore.

The Certificate of Maritime Regulatory Bodies is obtained after completing the course and passing the online test.

Presentation

This training course provides an overview of the general hazards existing on board ships, the appropriate protective equipment to be worn, the precautions to be taken before entering a confined space and other dangerous situations.

Objectives

On completion of the training, students will be able to:

Know the general principles and the hazards existing on board ships

Get familiar with the different personal protective equipment and their applications 

Understand the hazards related to confined space entries, and the precautions to be taken

Know the precautions to be taken about the various dangerous situations likely to be found on board ships.

Program

General principles

Risk control structure

Personal Protective Equipment (PPE)

o Protection of the head

o Protection of eyes and face

o Respiratory protection

o Protection of the feet

o Hearing protection

o Protection of the body

o Protection against fall from height

o Protection of the hands

o Other safety equipment

Safe boarding of ships and offshore units

General precautions while working on board

o Slips, trips and falls

o Internal inspections

o Engulfment

o Fire & explosion

o Hazardous materials

o Air quality & Oxygen rate

o Main points of attention

Confined spaces

o General precautions

o Entry permit

o Rescue attempts

o Particularly dangerous spaces

Other dangerous situations

o Use of rafts or boats for inspections

o Working at height

o Pressure tests

Certificate

On completion of the training program, the student will be awarded:

A Certificate of Personal Safety on Board Ships, issued by Bureau Veritas Solutions Marine & Offshore.

The Certificate of Personal Safety on Board Ships is obtained after completion of the course and passing the online test.

Presentation

This training course describes the classification and statutory certification processes and provides an overview of the class and statutory surveys.

Objectives

On completion of the training, students will be able to:

Understand the classification process and get familiar with classification terms, definitions and rules.

Understand the process of Statutory Certification and get familiar with Statutory Certification terms.

Know the scope of Classification and Statutory Certification

Program

Module 1 – Classification

History of classification

History of Bureau Veritas

Classification Societies and IACS

Definitions

Scope of classification: Classification tasks, responsibilities of other parties, classification certificate, request for intervention, surveyor's intervention, operation and maintenance of ships, flag and port state control inspections 

Classification notations: Class symbols, construction marks, service notations, navigation and operating area notations, additional class notations

Classification process: Assignment of class for new buildings, classification after construction, class reassignment, maintenance of class

General principles of surveys: Survey procedure, definitions, survey preparation and conditions for surveys, terminology

Survey types: Class renewal surveys, other periodical surveys, occasional surveys

Suspension and withdrawal of class

Scope of surveys: Annual surveys, intermediate survey, class renewal survey, bottom survey, tailshaft survey, boiler survey

Module 2 – Statutory Certification

History of statutory conventions

Definitions

International conventions: SOLAS, COLREG, Load Lines, MARPOL, AFS, BWM 

Recognitions and authorisations

IMO RO Code

Statutory surveys

Periodicity of statutory surveys

Survey findings

Types of statutory certificates

Issuance of statutory certificates

Certificate

On completion of the training program, the student will be awarded the following qualifications:

Certificate of Introduction to Class and Statutory Surveys awarded by Bureau Veritas Solutions Marine & Offshore.

The Certificate of Introduction to Class and Statutory Surveys, issued by Bureau Veritas Solutions Marine & Offshore, is obtained after completing the course and passing the qualification examination.

The IEMA Foundation course provides staff with a solid knowledge of the environment, sustainability, and governance principles relevant to organizations.  It covers specific management tools and skills with a practical application for the workplace to enable staff to improve performance.

Develop the knowledge and skills to help improve sustainability and environmental performance

Learn practical skills to help reduce the impacts of the organization on the environment

Upon completion of this course, learners will be able to:

• Understand business, governance, and environmental principles and their relationship with organizations, products, and services

• Ensure compliance with major environmental policy and legislation 

• Implement specific tools, techniques, systems, and practices to improve sustainability performance

• Collect data, perform analysis and evaluate information to provide sustainable solutions

• Implement change and transformation to improve sustainability

Presentation

This training course provides a general overview of the MARPOL requirements concerning the protection against oil pollution from machinery spaces.

Objectives

On completion of the training, students will be able to:

Understand the means for control of discharge of oil residues and the requirements for oil filtering equipment and 15 ppm alarm.

Get familiar with the Oil Record Book, SOPEP booklet and the required drills.

Know the details of MARPOL surveys and the certificates to be issued.

Know the most common PSC deficiencies related to MARPOL Annex I.

Program

History of MARPOL Convention

Survey and certification

Sludge tanks

Oil fuel tank protection

Standard discharge connection

Oil filtering equipment: 

o Bilge water waste system

o Oily water separator

o Piping system

o Documentation

Control of discharge of oil

Oil record book

Shipboard oil pollution emergency plan

Scope of the different surveys required

PSC inspection and most common deficiencies

Certificate

On completion of the training program, the student will be awarded:

A Certificate of MARPOL Oil Pollution from Machinery Spaces, issued by Bureau Veritas Solutions Marine & Offshore.

The Certificate of MARPOL Oil Pollution from Machinery Spaces is obtained after completion of the course and passing the online test.

Presentation

This training course provides a general introduction to the Performance Standard for Protective Coatings (PSPC).

Objectives

On completion of the training, students will be able to:

Understand the main objectives of the IMO Performance Standard for Protective Coatings.

Know the Statutory and Classification requirements for new constructions.

Know the requirements for in-service maintenance, repair and re-coating.

Know the key Stakeholders and their roles.

Understand the contents of the Coating Technical File.

Program

Why was the performance standard needed?

Objectives of the PSPC

Key dates

Statutory and Class requirements

Primary surface preparation and shop priming

Steelwork and edge preparation

Surface preparation and shop primer removal

Coating

Erection

Key stakeholders

o Shipowners

o Shipbuilders

o Paint Manufacturers

o Classification Societies

Coating technical file

o Contents

o Review

o Maintenance and repair

Certificate

On completion of the training program, the student will be awarded:

A Certificate of Introduction to PSPC, issued by Bureau Veritas Solutions Marine & Offshore.

The Certificate of Introduction to PSPC is obtained after completion of the course and passing the online test.

The modern workplace is often thought of as a strictly professional, rational, logical environment. Cooperation is key--personal opinions and emotions must be put aside in the name of teamwork, which may be easier said than done! No one can expect to connect with fellow colleagues the way they do their own friends or family members. One crossed word or bad mood can damage corporate relations, sometimes irreparably. The uncertainty of the business environment of today, and resulting stress that follows only adds to the pressure workers feel in performing their level best. Feeling overworked and overwhelmed is natural in the workplace, especially when it comes to dealing with change.   The purpose of this course is to illustrate ways you can overcome the emotional barriers you may face in the workplace. This course will guide you through various exercises and give you tips to help you manage your emotions at work so you can perform to the best of your abilities.

Presentation

This training course composed of 4 modules provides an overview of the Polar Code. It includes a general presentation of the Polar Code, the certification process, the safety requirements and the environmental protection requirements.

Objectives

On completion of the training, students will be able to:

Understand the main sources of hazards associated with the operations in polar waters and be familiar with the general principles, structure and philosophy of the Polar Code.

Know the main steps of the certification process, the operational assessment methodologies used to establish the operational limitations in ice operations, the requirements and contents of the Polar Water Operational Manual, and the survey and certification requirements.

Have a general understanding of the safety requirements concerning ship’s design and construction, machinery installations, safety equipment and fire protection, safety of navigation and communication equipment.

Get familiar with the requirements for operations in polar waters and training of crew.

Understand the Polar Code requirements for protection against oil pollution, NLS pollution, sewage pollution and garbage disposal.

Program

Module 1 – The Code

Introduction

Regulatory framework

The Polar Code

Module 2 – Certification Process

Certification overview

Operational assessment

Polar Water Operational Manual

Surveys and Certification

Polaris

BV Rules 

Module 3 – Safety Requirements

What does the Polar Code mean for safety?

Design and Construction

Equipment

Fire protection

Life-saving appliances

Operations and manning 

Module 4 – Environmental protection

How the Polar Code protects the environment?

Pollution prevention

Certificate

On completion of the training program, the student will be awarded: 

A Certificate of Polar Code, issued by Bureau Veritas Solutions Marine & Offshore.

The Certificate of Polar Code is obtained after completion of the course and passing the online test.

Presentation

This training course provides general information on the ship’s propulsion system and its main components, the Rules’ requirements for design and survey of propeller and shaft installations, the requirements and methodology for the assessment on board of shaft alignment, and an overview of tailshaft survey requirements.

Objectives

On completion of the training, students will be able to:

Know the main propulsion shaft components

Understand the design requirements for propellers and propeller shafts 

Get familiar with the arrangements and installation on board of propellers and propeller shafts

Understand the main requirements for shaft alignment

Understand the survey requirements for propeller shafts and other propulsion systems.

Program

Main components of propulsion shafting

Design and construction of propulsion shafting

o Rules requirements

o Shaft alignment software

o Documentation to be submitted

o Materials

o Couplings

o Scantlings

o Lubrication system

Arrangement and installation – Shaft alignment

o Alignment calculation

o Shaft alignment sighting

o GAP and SAG method

o Bearing loads

o Alignment checking after chocking

Material tests, workshop inspections and testing, certification

Propellers

o Classification requirements

o Propeller types

o Geometry of propeller

o Materials

o CPP control system

o Arrangement and installation

o Testing and certification

Tailshaft surveys

o Survey schemes

o Periodicity

o Scope of surveys for traditional propeller shafts

o Scope of surveys for other propulsion systems

Certificate

On completion of the training program, the student will be awarded:

A Certificate of Propeller and Shaft Installations, issued by Bureau Veritas Solutions Marine & Offshore.

The Certificate of Propeller and Shaft Installations is obtained after completion of the course and passing the online test.

Presentation

This training course describes the various components of a shaft line and the different types of shafts and their couplings, the importance of shaft alignment and the various methods utilized for shaft alignment. The course provides also a brief introduction to the vibrations that may affect the shaft lines.

Objectives

On completion of the training, students will be able to:

Get familiar and understand the components of a shaft line, know the types of shafts and their couplings, understand the protection required and the shaft line components scantlings and get familiar with the required tests and certification of shaft lines.

Understand the importance of shaft alignment and the factors influencing the alignment, know the different alignment methods currently employed and understand the shaft alignment issues for installations other than the main shafting line.

Understand the different types of vibrations that may affect shaft systems, know the general principles of torsional and axial vibrations and get familiar with the vibration control methods and vibration tests and measurements

Program

Module 1 - Shaft Lines and Propeller

Shaft line components: Shafts, shaft liners, propellers, propeller cap, shaft and intermediate bearings, stern tube, stern tube bushes and seals

Couplings: Flanged couplings, hydraulic couplings, flexible couplings

Design and construction: Propeller shaft key and keyway, shaft materials, couplings materials, coupling bolts, shaft scantlings, shaft monitoring

Inspection and certification: Inspections during construction, material tests, hydrostatic tests, certification, sea trials

Module 2 – Shaft Alignment

Introduction

Alignment calculation

Required information

Factors influencing the alignment: Draught, buoyancy, rigidity of the bearing base, temperature

Alignment methods: Gap and sag method, sighting method, jack-up method, strain gauge method

Alignment verification on board

Shafts for other installations: Alignment techniques, preparation, types of misalignment, alignment methods

Module 3 – Shaft Vibrations

Torsional vibrations

Rules requirements

Vibration damper

Barred speed range

Required documentation

Calculation principles

Axial vibrations

Vibration control and tests

Certificate

On completion of the training program, the student will be awarded:

A Certificate of Shaft Alignment, issued by Bureau Veritas Solutions Marine & Offshore.

The Certificate of Shaft Alignment is obtained after completing the course and passing the online test.

Presentation

This training course provides a general overview of the requirements of the International Load Lines Convention and the conditions of assignment of load lines.

Objectives

On completion of the training, students will be able to:

Know the general requirements of the International Load Lines Convention and understand the conditions of assignment of load lines.

Know the different types of surveys; understand the scope of each survey and the certificates, records and documents associated with the Load Lines Convention.

Know the most common deficiencies and PSC detainable items in connection with the Load Lines Convention.

Program

History of Load Lines Convention

Purpose of the Convention

Definitions

Freeboard calculation

Load line marks

Conditions of assignment

o Information to be supplied to the Master

o Doors

o Cargo and other hatchways

o Machinery space openings and miscellaneous openings

o Ventilators and air pipes

o Scuppers, inlets and discharges

o Scuttles and windows

o Freeing ports

o Protection of crew

o Special conditions of assignment for Type A ships

Special requirements for ships assigned with timber freeboards

Certificates, records and other documents

Scope of Load Line surveys

o Initial survey

o Annual survey

o Renewal survey

Common PSC deficiencies related to Load Lines

o PSC statistics

o Detainable deficiencies

Certificate

On completion of the training program, the student will be awarded:

A Certificate of Load Lines, issued by Bureau Veritas Solutions Marine & Offshore.

The Certificate of Load Lines is obtained after completion of the course and passing the online test.