Course catalogue

Problems come in all shapes and sizes, and they are an inevitable part of business life. Instead of trying to avoid or ignore them, it’s better to accept them, find ways to solve them and learn from them. With the right perspective, problems can even be gateways to innovation. There are a variety of models and methods that can be used to identify, analyze, and implement effective solutions. In this lesson, we will look at a hybrid of the A3 model, 5 Whys, and Divergent/Convergent methods.

• Identify the eight steps of the A3 model  

• Assist your team in problem-solving

The virtual interview can be a challenging and difficult process if you don’t prepare properly. You may face many challenges, such as technological, ambience related issues. However, to convene a successful interview, it is important to how to overcome these challenges. Branding your company is also one the challenges you may face when conducting virtual interview. Home setup throws various set of challenges, which one must overcome to have successful virtual interview. In this course, you will learn to overcome the challenges faced in conducting a successful virtual interview. 

• Identify the requisites of a pre-interview process

• List best practices while conducting interview virtually

• Identify post interview actionable

Organizations are changing, and so are our offices. The new age millennials are shifting toward the virtual world. More and more organizations use virtual teams to meet corporate goals. This has created the need to determine how best to manage and lead these virtual groups. 

Traditional methods of managing on-site groups don’t work with remote workers, because virtual teams are most often composed of workers who are spread over a varied geographic and cultural expanse and communicate, for the most part, electronically. Future Workforce Report states that 63 percent of companies utilize virtual workers, but only 57 percent have standards in place to manage the process. 

In this lesson, you will learn to effectively guide teams that they rarely see face-to-face.

• Establish requirements 

• Build mutual trust with your virtual team 

• Communicate frequently with them

Leadership education is an ongoing process. Your success will increase when you invest time in studying leadership models and characteristics, reading about great leaders, putting your knowledge into practice, and then evaluating the results. It takes different skills and abilities to successfully lead small and large teams. In this course, you will get familiarized with many advantages and disadvantages, as well as the best practices to be adopted to lead small and large teams successfully.

• Identify the strengths and challenges of large and small groups

• Examine the best practices for leading small teams

• Examine the best practices for leading large teams

Over 50 years ago, a social psychologist Douglas McGregor of MIT published a book outlining his research of two contrasting management styles: Theory X and Theory Y.  

He argued that Theory X, based on hierarchy and power, was an outdated authoritarian “top-down” way of managing people. Theory Y, he proposed, was an improved, alternative method of management, one that was more participative and synergistic.

• Define Theory X and Y management styles 

• Describe Theory X and Y from the management’s and worker’s perspective 

• Differentiate between Theory X and Theory Y managerial styles

Sales effectiveness is the process of identifying and utilizing the right sales activities to generate the best sales outcomes. Your definition of a successful sale will depend upon your product, service, corporate goals, and objectives. Companies measure their effectiveness in a variety of ways: increased profit, new product sales, or shortened sales cycle. Successful sales organizations share a commitment to defining, measuring, and optimizing all of the components of their sales process in order to consistently achieve strategic goals. 

• Build an effective sales process   

• Measure your sales process  

• Practice the customer-centric sales approach

A dream doesn't become reality through magic; it takes sweat, determination and hard work.

 -Colin Powell 

A new methodology for innovation, “Trystorming” is a combination of “Brainstorming” and “Trying” something practically. This lesson highlights the difference between brainstorming and trystorming, and provides the guidelines for where and when it can be used. Trystorming is a practical approach to innovating by focusing on practically trying or experimenting within reasonable limits to understand the efficacy of an idea before implementing it fully. Take this lesson to pick up the basics of trystorming and lead innovations in your organization.

• Explain what is trystorming 

• Know the difference between trystorming and brainstorming 

• Describe the guidelines for trystorming and where it can be used

Only in Norwegian

Kurset dokumenterer at skipsoffiserer (dekk og maskin) har gjennomført godkjent oppdateringskurs (IMO80) minst hvert femte år.

Deltakerne skal etter endt kurs kunne

- Ta kommandoen over en redningsfarkost eller mann-overbord-båt under og etter utsetting (Tabell VI/2-1) 
- Lede brannslokningsoperasjoner om bord på skip (Tabell VI/3) 
- Gi førstehjelp omgående i tilfelle av ulykke eller sykdom om bord (Tabell VI/4-1) 
- Gi medisinsk behandling av syke og skadde mens de er om bord. Delta i samordnede opplegg for medisinsk bistand til skip (Tabell VI/4-2)

Kursinnhold
- Medisinsk førstehjelp for maskinoffiserer
- Medisinsk behandling for dekksoffiserer
- Ledelse av brannslokking
- Bruk av redningsfarkoster

Praktiske øvelser

- Dag 1: Medisinsk behandling for dekksoffiserer

- Dag 1: Medisinsk førstehjelp for maskinoffiserer
- Dag 2: Brannledelsesteori, brannøvelser og røykdykking med pressluftapparater
- Dag 3: Redningsteori og mønstring og redningsøvelser med redningsfarkoster

Objective: The main goal is to provide personnel who are to perform the roles of signal transmitter, signalers and deck operator with sufficient knowledge of handling and transport of dangerous goods and hazardous waste, to be able to identify hazards and risks when handling this type of cargo, in such a way that unwanted incidents are avoided.

Safe handling and transport of dangerous goods and hazardous waste requires knowledge of hazards and risks, regulations, correct execution and safe practice during treatment and transport.

Content:

The learning process leading up to a certificate of competence is carried out to contribute to safe lifting operations, as well as to document the necessary knowledge and skills in accordance with requirements laid down in national regulations and standards.

After completion, participants must be able to identify hazards, risks, causes and consequences of accidents with dangerous goods and hazardous waste.

Participants will also be familiar with restrictions, requirements, classifications, identification, packaging, marking, documentation and handling of dangerous goods and waste.

Focus on production and processing. Upon completion of this course, participants should be able to give an account of the production process of oil and gas. They should be able to identify platform equipment, state the position, and, in principle, give an account of the workings of the production and process equipment involved.

Course Content 

Introduction:

What is produced?

- Liquids

- Gases

The production well:

The Christmas tree

The production process, main and auxiliary equipment

- Well head

- Production manifold

- Inlet separator/water separator

- De-gassing tanks

- Liquid separators

- Suction brushes

- Gas Brushes

- Compressors

- Coalescer

- Flare boom - Coolers/heat exchangers

- Pumps

- Filters

- Valves

The production process, main and auxiliary equipment, cont.:

- Measuring apparatus

- Water machines - electric boilers

- Gas treatment equipment

- Separators for gas/condensate

- Storage tanks and equipment

- Re-injection manifold

- Safety and surveillance systems

- Help systems

Production methods:

- Primary extraction

- Secondary extraction (gas/water injection)

Future production systems:

- Underwater/satellite system

The course can also be arranged internally and can be tailor-made for individual companies.

Only in Norwegian

Kurset gir kursdeltakerne kunnskap om ARL's funksjon og rolle, effektiv kommunikasjon, innholdet i situasjonsrapporter og observasjonsteknikker. Deltakerne lærer også hvordan man slokker mindre branntilløp, samt å utføre livreddende førstehjelp.

Kurset er i hovedsak basert på praktiske øvelser i slukking av brann, bruk av utstyr, slukkemetoder og førstehjelp.

Kursinnhold

Brann:
- Funksjon og rolle 
- Observasjonsteknikk 
- Kommunikasjon 
- Situasjonsrapport
- Slokking av branntilløp med håndslokkemateriell 
- Barrierer (tekniske, menneskelige og organisatoriske)

Førstehjelp:
- Sirkulasjon / blødninger 
- Hjerte- og lungeredning 
- Brannskader 
- Stans av blødninger
- Hode-, nakke- og ryggskader 
- Transport av skadde 
- Førstehjelp, nye momenter

Etter endt undervisning skal kursdeltakerne:
- Kjenne til ARL's funksjon og rolle
- Kunne etablere effektiv kommunikasjon 
- Kjenne til innholdet i en situasjonsrapport 
- Effektivt kunne slokke et mindre branntilløp med en håndslokkemateriell 
- Kjenne til observasjonsteknikker 
- Kunne utføre livreddende førstehjelp

Presentation 

This training course describes the inclining test and lightweight measurement procedures. Inclining test is a test performed on a ship to determine her stability, lightship weight and the coordinates of her centre of gravity. The test is applied to newly constructed ships greater than 24 metres in length, and to ships altered in ways that could affect stability.

Objectives 

On completion of the training, students will be able to: 

Get familiar with the stability of vessels at sea. 

Know the forces involved in the movement of ships. 

Know the types of inclination and equilibrium. 

Understand how and when to perform an inclining test or lightweight check. 

Know the precautions to be taken to perform or witness such tests

Program

Intact stability 

o Introduction to stability and trim 

o Transverse intact stability 

o Characteristics of GM 

o Free surface effect 

o Trim and stability booklet 

Inclining experiment 

o Test description 

o The general condition of the ship 

o Inclining weights 

o Pendulums 

o Means of communication 

o Documentation 

o Inclining test procedures 

o Acceptance and exemptions 

Lightweight measurement 

o Test description 

o Lightweight measurement procedures 

Precautions to be taken to perform or witness these tests

Certificate 

On completion of the training program, the student will be awarded the following qualifications:

o Certificate of Inclining Test and Lightweight Measurement awarded by Bureau Veritas Solutions Marine & Offshore.

The Certificate of Inclining Test and Lightweight Measurement, issued by Bureau Veritas Solutions Marine & Offshore, is obtained after completing the course and passing the qualification examination. 

Presentation

This training course provides an overview of the Radiographic Testing (RT) method for non-destructive examination of materials and welding, its objectives and principles.

Objectives

On completion of the training, students will be able to:

Understand the basic physical principles of radiographic testing.

Know the testing procedure and the inspection process referred to the equipment and films used.

Differentiate applications and the acceptance criteria applied.

Get familiar with the purpose of reference accessories to ensure the image quality and the quality of test performance in general.

Program

History

Basic principle

o Radiation

o Films

o Radiographic image quality

Equipment and testing materials

o Radiation sources

o Film systems

o Image quality indicators

o Film viewing equipment

Testing procedure

o Selection of testing parameters

o Test arrangements

o Film processing

o Film evaluation

Applications and acceptance criteria

o Scope

o Weld inspection

o Indications

o Acceptance criteria

o Test report

Reliability, quality of test results

o Test performance

o Film viewing

o Film examination

o NDT personnel competence

o Safety aspects

Certificate

On completion of the training program, the student will be awarded:

A Certificate of NDT – Radiographic Testing, issued by Bureau Veritas Solutions Marine & Offshore.

The Certificate of NDT – Radiographic Testing is obtained after completion of the course and passing the online test.

Presentation

This training course covers the requirements of SOLAS Convention concerning the safety equipment of cargo ships. It includes the documentation required on board, life-saving appliances, firefighting equipment, the safety of navigation, safety equipment in general and additional requirements for tankers.

Objectives

On completion of the training, students will be able to:

Know the documentation required to be available on board and understand the requirements of the STCW Convention for safe manning crew members. 

Understand the requirements concerning personal life-saving appliances, survival crafts, rescue boats, and launching and recovery arrangements.

Understand the requirements for fire protection, fire detection and fire extinguishing systems, and get familiar with the specific requirements for the carriage of dangerous goods.

Know what are the navigational equipment and appliances required to ensure the safety of navigation and get familiar with other safety equipment required on board.

Understand the additional requirements applicable for tankers and get familiar with inert gas systems

Program

Module 1 – Documentation on Board

Module 2 – Life-Saving Appliances

Module 3 – Fire Fighting Equipment

Module 4 – Safety of Navigation

Module 5 – Safety in General

Module 6 – Additional Requirements for Tankers

Certificate

On completion of the training program, the student will be awarded:

A Certificate of SOLAS Safety Equipment, issued by Bureau Veritas Solutions Marine & Offshore.

The Certificate of SOLAS Safety Equipment is obtained after completing the course and passing the online test.

Grunnleggende teoretisk og generell sikkerhetsopplæring i trykktesting iht. Forskrift om utførelse av arbeid best. 703.

Kursinnhold

- Trykk og testmedier

- Materiallære

- Bolter og skruer

- Kontroll og vedlikehold

- Gjenger og koblinger

- Sikkerhet

- Høytrykkspumper og boosterpumper

- Slanger

- Valg av testutstyr

- Prosedyrer

- Måleenheter/tabeller

- Arbeidsmiljø

- Avsluttende teoretisk prøve

Resertifiseringen er i henhold til NS EN 1591-4. Kurset gir kunnskap om forberedelse, planlegging, utførelse og dokumentering av arbeid på boltede forbindelser. Kurset er en kombinasjon av teori og praksis og avsluttes med en teoretisk test samt en praktisk test med sensor.

For hvem

Mekanikere, industrirørleggere, prosessteknikere, arbeidsledere, planleggere, lærlinger og lignende

Formål

Hovedmålet er å gi nødvendig kompetanse, både kunnskaper og ferdigheter til utførende ansvarlig person som skal demontere, montere og forspenne boltede forbindelser ihht EN 1591-4 kapittel 8.

Innhold

Planlegging og forberedelse av arbeidet Gjennomgang av dokumenter. Demontering, rengjøring og inspeksjon, montering av pakninger, oppretting, tiltrekking av flenser, dokumentering og etterkontroll av følgende

• ASME RTJ,

• ASME RF/FF,

• API,

• NCF5 Compaktflens

Standard NS-EN 1591-4 sets requirements for maintenance of competence. If there has been a stay with work on flanged connections for six months or more, a new refresher course must be completed in order to continue to have valid approval. We offer a separate course for those who do not get enough practice (within 6 months) to maintain the approval. The aim is to provide the participant with sufficient theory and practice to continue to be able to perform flange work in accordance with current requirements. The course includes: Flanges, Clamps, Bolts and lubrication, Gaskets, Working procedures, Understanding safe use of tools and equipment, Associated documents

After completing the course, the students should be able to take part in their own organisation’s emergency management and be familiar with emergency preparedness in the petroleum industry.

Course Content

Lectures and simulation/practical exercises and drills within:

- Emergency preparedness organisation

- Efficient management of an emergency situation

- Cooperation – roles and responsibilities

- Mental reactions and stress management

- Emergency room conduct – practical training

This course is valid for 24 months.

LEARNING OBJECTIVES

The objective of this course is to give the trainee DPOs as much hands-on experience as possible in the time available. This is achieved by running the candidates through intensive simulator training whilst being exposed to environmental and technical worst case scenarios. This will increase the candidate’s operational skills and knowledge in DP Operations.

CONTENT

• All the exercises are carried out on a full scale ship simulator
• DP operations planning and watch keeping procedures
• Handling of position reference systems
• Handling of various propulsion systems
• Repetition of various theoretical topics from the DPO
• Preparation and DPO Start courses upon request from course participants

LEARNING PROCESS

This course is designed to give the trainee DPO extensive hands-on training in the use of the DP in a number of varied worst case scenarios. Candidates for the DPO Experience volume training course must have completed the DPO Preparation and the DPO Start courses, or be able to document equivalent competence.

LEARNING PROCESS

This course is designed to give the trainee DPO extensive hands-on training in the use of the DP in a number of varied worst case scenarios. Candidates for the DPO Experience volume training course must have completed the DPO Preparation and the DPO Start courses, or be able to document equivalent competence.

CERTIFICATE

Certification of attendance will be issued upon successful completion of the course.