Course catalogue

This course is made for personell envolved in design, planning, projecting, installation and maintenance on electrical installations and equipment offshore. 

The purpose of the standard is to minimize the hazards to people and equipment, whilst optimizing dependability.

Objective: The purpose of the standard is to minimize the hazards to people and equipment, whilst optimizing dependability.

Content:

- An easy to understand overview and explanation of the committees/regulations/standards and how they are intertwined. 

- Presentation of the regulations and norms: PTIL 5 HMS, Nek 410 (IEC 60092), Nek 420 (IEC 60079), ATEX directives including standards and the Norsok series. 

- The structure and history of the IEC 61892 series, and the scope and application. 

- By using a fictive, illustrated installation, we will focus on the practical elements covered in the following standards: 

o IEC 61892-1 - General requirements and conditions 

o IEC 61892-2 - System Design 

o IEC 61892-3 – Equipment 

o IEC 61892-4 – Cables 

o IEC 61892-6 – Installation 

o IEC 61892-7 – Hazardous areas

This course is only available in Norwegian.

Provided in association with Astutis, NEBOSH Learning Partner 807.

The NEBOSH National Diploma in Occupational Health and Safety is an advanced health and safety qualification. Equivalent to an undergraduate degree in OHS. The NEBOSH Diploma is NEBOSH's flagship qualification. It is recognized by employers and professional bodies in over 180 countries around the world!

The qualification will develop competence in all areas of health and safety so you can reduce risk in dangerous environments and keep people safe. It is the ideal course if you want a successful, long-term career in health and safety.

Unit A: Managing Health and Safety

This unit provides an in-depth understanding of the key areas for managing health and safety, covering moral, economic, and societal drivers, health & safety law, and health & safety management systems. 

A1 - Principles of health & safety management

A2 - Principles of health & safety law

A3 - Criminal Law

A4 - Civil Law

A5 - Loss causation and incident investigation

A6 - Measuring and reviewing health and safety           

A7 - Identifying hazards, assessing and evaluating risk

A8 - Risk control

A9 - Organisational factors

A10 - Human factors

A11 - The role of health & safety practitioner

Unit B: Hazardous Agents in the Workplace

Unit B details all major aspects of managing chemical, biological, physical and physiological hazards in the workplace.

B1 - Managing Occupational Health

B2 - Identification, assessment & evaluation of hazardous substances

B3 - Control of hazardous substances

B4 - Monitoring and measuring

B5 - Biological agents

B6 - Physical agents - noise and vibration

B7 - Physical agents - radiation

B8 - Mental ill-health & dealing with violence & aggression at work

B9 - Musculoskeletal risks and controls

B10 - Work environment risks and controls

Unit C: Workplace and Work Equipment Safety

Unit C provides a thorough understanding of how to create and manage safe working environments, covering welfare, fire, dangerous substances, work equipment, electricity, construction, and transport. 

C1 - Workplace welfare requirements and specific workplace issues

C2 - Fire and explosion

C3 - Workplace fire risk assessment

C4 - Storage, handling, and processing of dangerous substances

C5 - Work equipment (general)

C6 - Work equipment (workplace machinery)

C7 - Mobile, lifting, access, and work at height equipment

C8 - Electrical safety 

C9 - Construction & works of a temporary nature - hazards and controls

C10 - Workplace transport and driving for work

Presentation

This training course provides an overview of the Penetrant Testing (PT) method for non-destructive examination of materials and welding, its objectives and principles.

Objectives

On completion of the training, students will be able to:

Understand the basic physical principles of liquid penetrant testing.

Know the testing procedure and the inspection process referred to testing materials and equipment.

Differentiate applications and the acceptance criteria applied.

Get familiar with the purposes of reference materials and/or blocks to ensure the quality of test performance and testing results.Program

Basic principle, capillary effect

Physical properties of the penetrant

Testing procedure

o Pre-cleaning

o Penetrant application

o Excess penetrant removal

o Developer application

o Inspection and recording

o Post-cleaning

Testing materials and equipment

o Penetrants

o Removal methods

o Developers

o Equipment

Applications and acceptance criteria

o Indications

o Test report

Reliability, quality of test performance

o Surface preparation and condition

o Types of penetrant materials and equipment used

o Penetrations and development time

o Viewing conditions

o The temperature of the test surface

o The material tested and flaws expected

o NDT personnel competence

o Safety issues

Certificate

On completion of the training program, the student will be awarded:

A Certificate of NDT – Penetrant Testing, issued by Bureau Veritas Solutions Marine & Offshore.

The Certificate of NDT – Penetrant Testing is obtained after completion of the course and passing the online test.

Presentation

This training course provides an overview of the Ultrasonic Testing (UT) method for non-destructive examination of materials and welding, its objectives and principles.

Objectives

On completion of the training, students will be able to:

Understand the basic physical principles of ultrasonic testing.

Know the testing procedure and the inspection process referred to the equipment used.

Differentiate applications and the acceptance criteria applied.

Get familiar with the purpose of calibration and reference blocks to ensure the quality of test performance and test results.

Program

Basic principle

o Ultrasonic waves and propagation

o Ultrasonic pulse-echo principle

Equipment and testing materials

o Ultrasonic testing instruments

o Ultrasonic testing probes

o Coupling media

o Calibration and reference blocks

Testing procedure

o Surface preparation

o Scanning – ultrasonic testing techniques

o Testing parameters

o Examination

o Data presentation

Applications and acceptance criteria

o Scope

o Indication evaluation

o Acceptance criteria

o Test report

Reliability, quality of test results

o UT system performance

o NDT personnel competence

Certificate

On completion of the training program, the student will be awarded:

A Certificate of NDT – Ultrasonic Testing, issued by Bureau Veritas Solutions Marine & Offshore.

The Certificate of NDT – Ultrasonic Testing is obtained after completion of the course and passing the online test.

Presentation

This training course provides a general introduction to ship machinery, details of diesel engines, a description of piping systems in ship's engine rooms and an overview of marine auxiliary machinery such as pumps, compressors, purifiers, heat exchangers, etc.

Objectives

On completion of the training, students will be able to:

Know the different types and arrangements of ship machinery applied for ship propulsion, understand the main parameters of ship machinery and the basic propulsion power transmission principles, and know the conceptual requirements for reliable and safe work of ship propulsion.

Know the main parts of marine diesel engines and understand their functions, get familiar with the most common problems involving engine parts, and understand the basic requirements for the reliable and safe operation of diesel engines.

Know the different types of piping systems in the ships engine room, understand the purpose and the basic arrangement of systems.

Know the different types of auxiliary machinery found on board ships, understand their working principles and the basic requirements for reliable and safe work of auxiliary machinery.

Program

Module 1 – Ship Machinery

Overview of the different propulsion types: Low-speed diesel engine layout, medium-speed diesel engine layout, steam propulsion with HP and LP steam turbines, gas turbines propulsion, diesel-electric propulsion, combined layouts, dual fuel engines, nuclear propulsion plants

Diesel engines outline

High pressure and low-pressure steam turbines 

Gas turbine cycles

Module 2 – Engine Details

Cylinder heads

Cylinder liners

Pistons

Crosshead and connecting rods

Bearings

Crankshaft

Engine casing

Turbocharger

Module 3 – Engine Room Systems

Seawater system

Freshwater system

Fuel oil system

Lubricating oil system

Compressed air system

Exhaust system

Module 4 – Marine Auxiliary Machinery

Pumps: Centrifugal pumps, positive displacement pumps, reciprocating pumps

Separators

Heat exchangers

Air compressors and air receivers

Steering gear

Reduction gears

Shaft generator

Thrust bearing

Controllable pitch propeller

Certificate

On completion of the training program, the student will be awarded:

A Certificate of Marine Engineering Fundamentals, issued by Bureau Veritas Solutions Marine & Offshore.

The Certificate of Marine Engineering Fundamentals is obtained after completing the course and passing the online test.

Presentation

This training course provides a general introduction to welding, including an introduction to metallurgy, general information concerning welding, an overview of the electric arc processes commonly used in shipbuilding and details of welding inspection.

Objectives

On completion of the training, students will be able to:

Understand the nature and know the mechanical properties of metals; Understand the production process of steel and aluminium and the application of casting and forging processes.

Understand fundaments of fusion welding; Know how to determine heat input and preheat temperature; Understand the influence of the thermal cycle on weld microstructure and distortion; Know the general types of welding joints and the different welding positions

Know how to differ and recognize the arc welding processes used in shipbuilding; Understand the applicability and limitations of the different welding processes; Get familiar with common types of arc welding equipment and power sources

Know and apply the required activities in welding inspection; Determine and arrange the scope of inspection plan for different tasks; Know the different types of weld imperfections; Understand how to perform visual inspection of welding

Program

Module 1 – Introduction to Metallurgy

Module 2 – Welding Fundamentals

Module 3 – Arc Welding Processes

Module 4 - Welding Inspection

Certificate

On completion of the training program, the student will be awarded:

A Certificate of Welding Fundamentals, issued by Bureau Veritas Solutions Marine & Offshore.

The Certificate of Welding Fundamentals is obtained after completing the course and passing the online test.

Hytorc provide fundamental courses in flange work.
An important aspect of our operation is rooted in courses and training in flange work and bolted connections. We have been involved in the development of courses since OLF started their Gasslekasjeprosjekt (Gas-leakage project) in 2003, up until the updated requirements per NS-EN 1591-4 as of today.

Content:

The industries requirements in regards to training has provided improvements in the form of decrease in amounts of leakages both offshore and onshore. The executive operator gains better understanding and enhanced competence which further results in a safer work environment.

The fundamental course in flange work spans over 4 days, covering both theoretical- and practical training. Examination on both the theoretical and practical work will be conducted. Upon successful completion of the exams, a course certificate will be awarded. This certificate is valid for 5 years. To extend the validation of the certificate, a one-day refresher course must be completed before the expiration date of the certificate (within 5 years).
The refresher course prolongs the validity of the certificate for another 5 years upon completion.

The primary goal of the course is to provide necessary and required training which enables the individual to conduct independent work on flanges and bolted connections.

The course offers the attendees fundamental knowledge, inter alia:

-          Flanges

-          Clamps

-          Bolts and lubrication

-          Gaskets

-          Work Procedures

-          Understanding and safe use of hydraulic tools, torque wrench and equipment

-          Associated documents

The course is set up on request.

EXAM OBJECTIVES

This exam tests the skills and competence of a DPO against the requirements given in the competence standard DNV-GL Notation AJ/FT-AT.

The exam is a thorough test, covering the most important competences for a DPO, in compliance with relevant DNVGL competence standards. The test measures how well operation of equipment, duties and tasks are performed, all in compliance with relevant international, national and local regulations and requirements.

EXAM AND CERTIFICATION PROCESS

The test center will upon receipt of the application formsend a notification containing the following:

• Exam date and time
• Exam place and Terms & conditions
• Recertification requirements
• DNV GL standard for certification ST-0023
• Standard for certification 0032, Appendix A: Examination regulations
• Time schedule for examination

SPECIAL INFORMATION

• DNV GL Standard for certification ST-0032 - Test centre for certification of personnel
• DNV GL standard for certification ST-0033 - Maritime simulator systems
• DNV GL standard for certification ST-0023 - Competence of Dynamic Positioning Operators

CERTIFICATE

A DNV GL DPO certificate will be issued upon successful completion of the exam.

LEARNING OBJECTIVES

The course aim to give knowledge, understanding and practical skills within:
• Operations
• Forces
• Communication
• Planning

CONTENT

• Safety functions
• Start / stop procedures
• Operational limitations of crane operations
• Communication during crane operations
• Preparation and planning of crane operations
• Internal transport on the installation
• Loading and unloading supply vessels
• Crane operation on various fixed and floating installations

LEARNING PROCESS

The purpose of this course is to give operators and others involved in lifting operations the basic knowledge, understanding and skills.

This is achieved through an in-depth period of training on a full-scale DNV GL Class A crane simulator, supported by a program of lectures and instruction.

Study will cover dierent types of loads and external forces affecting the load on crane and boat.

SPECIAL INFORMATION

References: NORSOK R003

The course can be adjusted to suit company specific needs regarding the choice of unloading/loading procedures.

CERTIFICATE

Certification of attendance will be issued upon successful completion of the course.

LEARNING OBJECTIVES

The Offshore loading courses are designed to meet  Equinor, OGUK and company specific requirements for training of shuttle tanker personnel. The objective is to achieve optimal skills and understanding on how to handle a shuttle tanker in DP mode. The participants will use previously acquired knowledge on manual handling and basic DP together with updated advanced DP knowledge during training on Shuttle tanker operational procedures.

The course focuses on handling Shuttle Tankers in close proximity to Floating Production Storage and Off take units (FPSO’s/FSU’s), Offshore Loading systems (OLS), Single Anchor Loading (SAL) and Direct Shuttle Loading (DSL) from various FPSO’s.

CONTENT

Discussions on unwanted incidents
• Contingency situation scenarios
• Gain thorough understanding of:
- The DP system’s possibilities and limitations
- Offshore Loading procedures for various fields
- Correct use of Position Reference systems
- Requirements and guidelines that applies for
- Shuttle Tanker DPO’s

LEARNING PROCESS

All approaches to the loading buoys are carried out by using Dynamic Positioning Systems, according to procedures. Simulations also include reconstruction of known DP incidents involving shuttle tankers. The complexity of these exercises will be based on the experience of the person “in charge” on the bridge.

SPECIAL INFORMATION

References:
• Equinor Competence Requirements for Shuttle Tanker Personnel, WR 239
• OGUK Tandem Loading Guidelines Volume 1
• Teekay Competence Requirements, SP 0961
• Various operational procedures

CERTIFICATE

Certification of attendance will be issued on successful completion of the course.

Oppgradering fra Norsk Olje og Gass til IMO50 for personell som innehar Grunnleggende sikkerhetskurs for Norsk Olje og Gass (Offshore).

Kurset oppgrader personell med Grunnleggende sikkerhetskurs for Norsk Olje og Gass (Offshore) til STCW Grunnleggende sikkerhetsopplæring for sjøfolk. Kurset inneholder brannvern, røykdykking, brannslokking, sjøredning, grunnleggende førstehjelp og personlig sikkerhet og omsorg for menneskeliv og miljø. Kurset er godkjent etter IMO regelverket og gjelder hele verden.

With COVID-19 meaning that home working is no longer an option but a necessity for many, what are the potential side effects on our health and work performance. Employers may need to provide additional training to ensure appropriate supervision and work behaviours. These include remote technology, communication skills development, time management and ergonomics.

Managing remote teams and business continuity are operational priorities for companies during the COVID-19 pandemic.  Remote working allows some operations to continue and facilitate flexible work schedules, which typically improves individual performance. However, greater flexibility and leading teams remotely puts a greater burden on managers and makes supervision more complex. 

The group of workers who experience most difficulty in handling ‘boundary-less’ working are actually managers.  This is mainly because they are connected longer in their ‘non-working time’.

The ‘Managing Remote Teams’ bundle includes 3 months access to 10 online courses and over 10 hours of eLearning. 

• Negativity in the Workplace

• Decision Making

• Supporting Change: 03-Your Path to Supporting Change

• Management 101: 02-Leading and Communicating as a Manager

• Smart Management: Managing a Geographically Distributed Workforce

• Health and Safety for Home Workers (Managers)

• Lone Working (Managers)

• An Effective Leader’s Guide to Time Management

• Team Building IV: Conflict Management

• Essential Skills of Leadership: 05-Lead Effective Meetings

LEARNING OBJECTIVES

This course aim to provide Navigators on Shuttle Tankers knowledge and skills to be a certified DPO in offshore Loading Operations.

By the end of the course the students should have:

• Acquired a thorough knowledge of the various type of Offloading Operations, i.e. OLS (Offshore Loading System), SAL (Single Anchor Loading), Tandem loading from FPSO’s and FSU’s and DSL (Direct Shuttle Loading)
• The capability to operate the DP System in various
• modes associated with offshore loading operations; i.e. Joystick, Auto Pos, Approach, Weather Wane
• The ability to carry out any Offshore Loading Operation according to field procedures, guidelines and to best practice.
• The ability to react correctly to any unforeseen DP incident in order to avoid a disaster

CONTENT

• Simulator exercises
• Briefing and de-briefing of a variety of relevant exercises according to the actual field procedures
• Shuttle Tanker competence and training requirements
• Basic Human Factors

LEARNING PROCESS

All Offshore Loading exercises will be carried out on a Full Scale Visual DNV GL Approved DP Class A simulator, being able to simulate all types of operation listed as learning objectives.

SPECIAL INFORMATION

References:
• DNV GL, Standard for Certification no. 0023
• DNV GL, Standard for Certification no. 0008
• DNV GL, RP-0007

CERTIFICATE

Certification of attendance will be issued upon successful completion of the course.

Grunnleggende teoretisk og generell sikkerhetsopplæring i trykktesting iht. Forskrift om utførelse av arbeid best. 703.

Kursinnhold

- Trykk og testmedier

- Materiallære

- Bolter og skruer

- Kontroll og vedlikehold

- Gjenger og koblinger

- Sikkerhet

- Høytrykkspumper og boosterpumper

- Slanger

- Valg av testutstyr

- Prosedyrer

- Måleenheter/tabeller

- Arbeidsmiljø

- Avsluttende teoretisk prøve

The course "Hose assembly – safe appliances" provides a basic introduction to the safe use of hoses and selection of fittings for different applications. Furthermore, the course focuses on the identification of fittings, as well as basic practical training in hose assembly.

After the course, participants will be able to use the hose assembly equipment in a way that maintains a safe and appropriate work process. The course is divided into a theoretical and a practical part and is concluded with a written certification test. The course is conducted according to the standard TR 1803 and Oil and Gas United Kingdom Standard.

Objective: Through a combination of theory and practical training, this course provides participants with the necessary knowledge and skills required to work safely in enclosed spaces.

The Norwegian Labor Inspection Authority has made major changes to the regulations. People who work in tanks and closed rooms are the biggest difference that the regulation "Work in tanks" has fallen away. This is replaced by section 29 of the regulations «execution of work», which states that all work in closed rooms shall be performed «without danger to life or health». A simple requirement that gives the employer a great deal of responsibility.

New SOLAS requirements: Exercises in closed rooms and rescue, as well as portable gas measuring equipment.

Applies to: All ships covered by SOLAS and all high-speed vessels, mobile offshore drilling units and dynamically positioned vessels

Our courses are in accordance with SOLAS-IMO requirements and the Norwegian Labor Inspection Authority - Execution of work

The definitions of a cramped space vary from country to country, but the usual criteria usually include:

- A room that is predominantly or completely closed
- Contains health and / or safety hazards
- Is not designed for continuous stay of employees
- Has entrances or exits that are small or difficult to access
- A room that is large enough that you can enter it completely and perform the work tasks you have been assigned
- Limited air circulation

Content:

- Review of public laws and regulations
- Know which constituents a safe breathing air contains
- How to make a gas measurement before entering
- Plan entry jobs and rescue operations in closed rooms
- Equipment knowledge
- Exercises in our training tank. We practice entry and use of fall protection equipment, rescue equipment, breathing air equipment and gas meter

Social scientists have studied and designed leadership theories for decades to understand and explain how great leaders are made. They have compiled lists of leadership traits and constructed frameworks and models to illustrate the leadership phenomenon. And while these theories are detailed, thoroughly researched, and insightful, none provide “the” singular leadership model that works for every high-level manager aspiring to lead their team effectively and successfully.

What they do provide is an abundant source of leadership data that can be used to create your own flexible brand of leadership. Leaders face a wide range of tasks, responsibilities, and challenges—both anticipated and unexpected—every day.

Assembling a toolkit of leadership options that can address them is something smart leaders do. Let’s study the specifics of some core leadership theories and how you might use them in different business scenarios.

• Identify the Traits and Contingency theories

• Describe the Behavioral theory

• Explain the Transformational Leadership theory

How much time do you spend developing your leadership succession plan? As older leaders begin to retire at greater rates, the 2018 Deloitte Millennial Survey discovered that 65% of potential millennial leaders feel unprepared to take their places. Forbes reports that by 2025, 75% of the workforce will be made up of millennials. These statistics suggest that there’s a leadership crisis on the horizon. Designing a strategy and framework to direct leadership development is mission critical for every organization. Training—and retaining —emerging leaders in your company should be a top priority. Understanding what team members want and expect from an employer will help you develop the right programs and systems to keep your talent engaged in learning, growing, and contributing to your organization.

• Retain your talented resource   

• Design a leadership development framework   

• Create a culture of learning

The majority of meetings should be discussions that lead to decisions.

 -Patrick Lencioni 

An important part of planning a successful meeting is deciding who should attend the meeting. In the previous course, we have learned that less is more. Invite only those persons who are necessary to achieve the vision and are committed to getting the work completed. Similarly, it is equally important to define and assign specific roles and responsibilities to the team members attending the meeting. This is a critical part of pre-planning. Careful planning ahead of time will result in less resentment, less time wasted, better decisions, and greater ownership of the process by each member of the team.

• State the different roles played in a meeting 

• Determine the roles and responsibilities of a meeting leader

Managers are often called to present to the groups of customers, cross-departmental teams, or in-house decision-makers. The process of crafting and delivering a presentation requires organizational skills, insight, technical abilities, and courage. Public speaking can be intimidating. But, by taking the time to methodically plan and execute the necessary details, you can be prepared and confident to deliver an effective presentation. This course will walk you through the steps you’ll need to plan and organize your topic, choose visual aids, consider technology tools, and practice delivering your speech. 

• Research, decide, and plan your presentation  

• Create a presentation with additional aid   

• Practice and make the presentation