Oil and Gas

Course catalogue

hits
11
Course code: MTP-063
Course type: E-learning course
Duration: 150 minutes
Language: English, Norwegian
Price: GBP 100,-

Who is this course for?

This FSE High and Low Voltage Training course is suitable for everyone working on low and high voltage installations.

 

Is previous experience required?

You do not need prior knowledge or experience to complete this course, but it is assumed that you are competent in your designated role.

How will this course benefit me?

The course meets the requirements set in Section 7 of the ‘Safety Regulations for Work and Operation of Electrical Equipment and Installations – FSE’ which is that all relevant personnel undertake annual training and instruction in FSE. The course also provides the necessary training and instruction in first aid, focusing on electrical injuries, with the exception of the mandatory practical training in cardiopulmonary resuscitation (CPR).

The regulations of various authorities make FSE applicable to all those working with electricity, whether on board ship, on platforms or on land. This course is suitable for all, regardless of which industry you work in.

The authorities require that training in FSE and first aid in the event of electrical accidents is undertaken at least once a year. No more than 12 months shall elapse between training courses.

 

How will this course benefit my company?

By ensuring you have the knowledge and competence to be working on low and high voltage installations.

 

What standards are referred to in this course?

• Section 7 of the ‘Safety Regulations for Work and Operation of Electrical Equipment and Installations – FSE’

• The European standard

 

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.

Course code: MTP-064
Course type: E-learning course
Duration: 120 minutes
Language: English, Norwegian
Price: GBP 60,-

Who is this course for?

This FSE High and Low Voltage Training course is suitable for everyone working on low and high voltage installations.

 

Is previous experience required?

You do not need prior knowledge or experience to complete this course, but it is assumed that you are competent in your designated role.

 

How will this course benefit me?

The course meets the requirements set in Section 7 of the ‘Safety Regulations for Work and Operation of Electrical Equipment and Installations – FSE’ which is that all relevant personnel undertake annual training and instruction in FSE. The course also provides the necessary training and instruction in first aid, focusing on electrical injuries, with the exception of the mandatory practical training in cardiopulmonary resuscitation (CPR).

The regulations of various authorities make FSE applicable to all those working with electricity, whether on board ship, on platforms or on land. This course is suitable for all, regardless of which industry you work in.

The authorities require that training in FSE and first aid in the event of electrical accidents is undertaken at least once a year. No more than 12 months shall elapse between training courses.

 

How will this course benefit my company?

By ensuring you have the knowledge and competence to be working on low and high voltage installations.

 

What standards are referred to in this course?

• Section 7 of the ‘Safety Regulations for Work and Operation of Electrical Equipment and Installations – FSE’

• The European standard

 

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.

Course code: MTP-065
Course type: E-learning course
Duration: 120 minutes
Language: English, Norwegian
Price: GBP 60,-

Who is this course for?

This FSE High and Low Voltage Training course is suitable for everyone working on low and high voltage installations.

 

Is previous experience required?

You do not need prior knowledge or experience to complete this course, but it is assumed that you are competent in your designated role.

 

How will this course benefit me?

The course meets the requirements set in Section 7 of the ‘Safety Regulations for Work and Operation of Electrical Equipment and Installations – FSE’ which is that all relevant personnel undertake annual training and instruction in FSE. The course also provides the necessary training and instruction in first aid, focusing on electrical injuries, with the exception of the mandatory practical training in cardiopulmonary resuscitation (CPR).

The regulations of various authorities make FSE applicable to all those working with electricity, whether on board ship, on platforms or on land. This course is suitable for all, regardless of which industry you work in.

The authorities require that training in FSE and first aid in the event of electrical accidents is undertaken at least once a year. No more than 12 months shall elapse between training courses.

 

How will this course benefit my company?

By ensuring you have the knowledge and competence to be working on low and high voltage installations.

 

What standards are referred to in this course?

• Section 7 of the ‘Safety Regulations for Work and Operation of Electrical Equipment and Installations – FSE’

• The European standard

 

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.

Course code: IN-08
Course type: E-learning course
Duration: 30 minutes
Language: English
Price: GBP 40,-

Who is the course for?

This course is for any person who interacts with, or is responsible for, the specification, design, operation and maintenance of assets that employ safety instrumented systems.

Is previous experience required?

No previous experience is required to complete this course.

How will the course benefit me?

This course will provide you with an awareness of the purpose and nature of safety systems deployed to protect people, the environment and plant in the areas that you work.

How will the course benefit my company?

By ensuring personnel have an understanding of safety instrumented systems.

What standards are referenced in the course?

IEC 61508

IEC 61511

IEC 62061

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.

Course code: MUK-165
Course type: E-learning course
Duration: 1 hour
Language: English
Price: NOK 1000,-

Who is this course for?

Personnel requiring an awareness or understanding of downhole mechanisms.

 

Is previous experience required?

It is recommended you've had some exposure to drilling operations to undertake this course.

 

How will this course benefit me?

This course aims to introduce learners to the factors affecting hole cleaning, lost circulation and hole enlargement in relation to drilling operations.

 

How will this course benefit my company?

By ensuring you have been introduced to the factors affecting hole cleaning, lost circulation and hole enlargement in relation to drilling operations.

 

What standards are referred to in this course?

This course does not refer to specific legislation or standards but is written according to industry best practice.

 

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.

Course code: MUK-193
Course type: E-learning course
Duration: 70 minutes
Language: English
Price: GBP 80,-

Course Goal: This course aims to provide an introduction to the decommissioning process and an overview of the regulations governing decommissioning on the United Kingdom Continental Shelf (UKCS).

 

Who is the course for?

All relevant personnel

 

Is there an assessment? 

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.

 

Learning Objectives:

LO1 Give an overview of the history of oil and gas production on the United Kingdom Continental Shelf (UKCS)

LO2 Explain why decommissioning activity is increasing on the UKCS

LO3 Describe what is meant by ‘decommissioning’

LO4 Explain the scope of decommissioning on the UKCS

LO5 Provide an overview of relevant decommissioning legislation and regulations

LO6 Explain the impact of the Brent Spar incident on decommissioning regulation

LO7 Provide an overview of the OSPAR Decision 98/3

LO8 Identify the different phases of the decommissioning lifecycle

LO9 Provide a basic overview of well plugging and abandonment 

LO10 Provide an overview of the different methods of decommissioning

LO11 Provide examples of decommissioning projects on the UKCS

LO12 Give examples of the types of hazards which may be encountered during decommissioning

Course code: MUK-171
Course type: E-learning course
Duration: 30 minutes
Language: English
Price: NOK 500,-

Who is this course for?

Oil and Gas Operations Technicians.

 

Is previous experience required?

You do not need prior knowledge or experience to complete this course and it is assumed that you are competent in your designated role.

 

How will this course benefit me?

This course aims to provide an overview of wireline equipment and its operation.

 

How will this course benefit my company?

To ensure you have an overview of wireline equipment and its operation.

 

What standards are referred to in this course?

The course is made according to industry best practice.

 

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.

Course code: MUK-169
Course type: E-learning course
Duration: 120 minutes
Language: English
Price: NOK 1500,-

Who is this course for?

All personnel who are involved in offshore drilling.


Is previous experience required?

No previous experience is required to complete this course. 


How will this course benefit me?

This course aims to provide an overview of well control and the systems used in the process and is based upon the International Well Control Forum (IWCF) Level 1 Syllabus.


How will this course benefit my company?

This course will benefit companies by ensuring personnel have an understanding of well control and the relevant systems.


What standards are referred to in this course?

No standards or regulations are referenced in this course.


Is there an assessment?

Yes

Course code: MUK-254
Course type: E-learning course
Duration: 90 minutes
Language: English
Price: NOK 1200,-

Who is the course for?

This course is for those involved in performing process isolations, such as plant managers, operations staff, HSE managers and maintenance personnel.

Is previous experience required?

No previous experience is required to complete this course.

How will the course benefit me?

This course will provide learners with safety information for working with process isolations.

How will the course benefit my company?

This course will provide learners with an understanding of the hazards involved in process isolations and ways to mitigate the likelihood of accidents occurring during process isolation operations.

What standards are referenced in the course?

There are no standards or legislation referenced in this course.

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.

Course code: MUK-092
Course type: E-learning course
Duration: 2 hours 30 minutes
Language: Brazilian Portuguese
Price: NOK 1500,-

Course Goal: This course is designed to enable all personnel to have a common and consistent approach to both company and industry best practice in relation to managing produced water.


This course contains 7 sections:

Section 1: Introduction to the Oilfield Water Cycle 

Section 2: Production Streams and Disposal Management 

Section 3: Produced Water Discharges - Environmental and Regulatory Requirements

Section 4: Produced Water Treatment Principles

Section 5: Produced Water Treatment Equipment

Section 6: Produced Water Chemical Management 

Section 7: Oilfield Water Cycle Summary

Course code: MUK-014-NL
Course type: E-learning course
Duration: 120 minutes
Language: Dutch
Price: NOK 1200,-

Course goal: This course aims to provide all relevant personnel with an overview of best practices in Mechanical Isolations

Course Sections:

1. Introduction to Mechanical Isolations

2. Roles and Responsibilities

3. Safety Critical Manual Valves (SCMVs)

4. Planning Isolations

5. Performing Isolations

6. Isolation Security

7. HP/LP Systems

8. Reinstatement of Plant

 

Doel van de cursus: Deze cursus is erop gericht al het relevante personeel een overzicht te geven van de beste praktijken inzake mechanische isolaties

Cursusdelen:

1. Introductie tot mechanische isolaties

2. Functies en verantwoordelijkheden

3. Handbediende veiligheidskritische kleppen (HVKK's)

4. Isolaties plannen 

5. Isolaties uitvoeren

6. Isolatiebeveiliging

7. HD/LD-systemen

8. Herplaatsing van installatie

Hits per page