Course catalogue (PT)

Who is this course for?

All personnel involved in marine operations.

Is previous experience required?

No experience is required to take this course.

How will this course benefit me?

By ensuring you know how to respond to marine trash and debris incidents.

How will this course benefit my company?

By ensuring you know how to respond to marine trash and debris incidents.

What standards are referred to in this course?

US best practise.

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.

Who is the course for?

All relevant offshore personnel.

Is previous experience required? 

No previous experience is required to complete this course. 

How will the course benefit me?

This course aims to give offshore personnel the knowledge required to understand the hazards and controls associated with working in an environment where they could potentially be exposed to H2S.

How will the course benefit my company?

By ensuring you are aware of the hazards and controls associated with H2S exposure, which will in turn reduce incidents and accidents offshore.

What standards are referenced in the course?

• Control of Substances Hazardous to Health Regulations (COSHH)

• Health and Safety at Work Act

• Offshore Installations (Offshore Safety Directive)

• Offshore Installations (Safety Case)

• Offshore Installations (Prevention of Fire and Explosion, and Emergency Response) (PFEER)

• Offshore Installations and Wells (Design and Construction) Regulations

• EH40 Workplace Exposure Limits (WELs)

Is there an assessment? 

Yes - There is a course assessment with an 80% pass mark and 2 attempts. 

Learning objectives

- Identify the physical properties of H2S

- Recognise the physiological effects of exposure to varying toxicity levels of H2S

- Recognise the responsibilities and duties of all personnel and their duties under current legislation

- Recognise the current legal occupational exposure limits for short- and long-term exposure periods relating to H2S

- Identify the various methods for detecting H2S

- Identify the various personal and respiratory protection equipment required for undertaking tasks in areas where H2S may be present

- Recognise the hazardous area classifications which may be encountered on an offshore installation

- Identify the formal requirements for H2S contingency plans on installations

Course Goal:

This course aims to provide personnel with an awareness of US best practice in relation to noise and hearing conservation in the workplace.

Learning Objectives

LO1 Describe noise-induced hearing loss, and identify the early warning signs and symptoms to look for

LO2 Explain the workings of the human ear, how noise exposure causes damage, and the effects of such damage

LO3 Explain the responsibilities and duties of employers and individual personnel under current legislation

LO4 Explain how noise is measured and identify permissible workplace exposure levels 

LO5 Explain the risk assessment requirements

LO6 Identify the control measures that should be taken to reduce exposure to noise

LO7 Explain the requirements for hearing protection; how to use the different methods of hearing protection and the importance of maintaining hearing protection; advantages, disadvantages and attenuation of various types of hearing protection; instructions on selection, fitting, use and care of hearing protection; and the purpose of audiometric testing and an explanation of the test procedures

LO8 Explain the importance of health surveillance

Who is this course for?

Personnel who require knowledge or awareness of hydrates.

Is previous experience required?

You do not need prior knowledge or experience to complete this course.

How will this course benefit me?

This course aims to provide awareness of how gas hydrates may be formed and the effects that they can have on pipeline flow assurance. The course examines what hydrates are, how they are formed and their molecular structure. It discusses flow assurance, details the risks of pipeline plugging by hydrates, and outlines the various methods of controlling hydrate formation.

How will this course benefit my company?

By ensuring you are aware of how gas hydrates may be formed and the effects that they can have on pipeline flow assurance.

What standards are referred to in this course?

This course does not refer to specific legislation or standards but is written according to industry best practice.

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.

Who is this course for?

All relevant personnel, including Work Party members, Performing Authorities and Area Authorities.

Is previous experience required?

No previous experience is required to complete this course.

How will this course benefit me?

This course will provide you with guidance and useful techniques to help you carry out effective Toolbox Talks.

How will this course benefit my company?

Communication is vital to workplace safety. This course aims to provide personnel with the knowledge and techniques required to carry out effective Toolbox Talks.

What standards are referred to in this course?

This course does not refer to specific legislation or standards.

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.

Who is this course for?

All personnel, especially those involved in carrying out accident and incident investigations.

Is previous experience required?

No previous experience is required to complete this course.

How will this course benefit me?

This course will provide you with an overview of industry best practice in relation to accident and incident investigation.

How will this course benefit my company?

Incidents must be investigated to identify the root cause of the event and the controls necessary to prevent similar events occurring in the future. This course aims to provide personnel with the knowledge required to carry out an effective incident investigation.

What standards are referred to in this course?

• Reporting of Injuries Diseases and Dangerous Occurrences Regulations (RIDDOR)

• Occupational Safety and Health Administration (OSHA)

• EU Directive 89/391/EEC

• Management of Health and Safety at Work Regulations

• HSG245

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.

“Course on fall protection” is a course on the basics of fall protection for anyone working above ground.

This course outlines the laws and regulations related to fall protection. It contains information about active as well as passive protection gear, as well as first aid related to falls from a height. Upon completion of the course one will have information about the various aspects of fall protection. One will also learn how to carry out ones work in a safe and secure manner within the confines of the applicable laws and regulations.

Course Content

- Laws and regulations

- Active and passive fall protection

- First aid

Course Goal: This course aims toprovide learners with an overview of the requirements for storing, transporting and handling explosives

Target Audience: All relevant personnel

Learning Objectives:

LO1 Explain why explosives are used in the Oil and Gas Industry

LO2 Identify the different types of explosives used in the Oil and Gas Industry

LO3 Give examples of hazards associated with the storage, transportation and handling of explosives

LO4 Explain the requirements for the transportation and labelling of explosives

LO5 Identify the mitigation measures designed to reduce the likelihood or consequences of an explosion

Who is the course for?

All relevant personnel.

Is previous experience required?

No experience is required to complete this course.

How will the course benefit me?

This course aims to provide an overview of best practice in relation to drug and alcohol awareness in the workplace.

How will the course benefit my company?

This course provides drug and alcohol awareness, information on company abuse, illegal drug use, and the abuse of prescription drugs. 

What standards are referenced in the course?

N/A

Is there an assessment?

Yes

Learning Objectives:

• Identify various types of common drugs

• Find company policies on alcohol and controlled substances

• Explain the various methods of alcohol and drug testing

• Explain the consequences of violating company drug and alcohol use policies

• Describe the effects of alcohol and drugs on the body and job performance

Course goal: This course aims to provide the knowledge and techniques for carrying out gas testing.

This course contains the following sections:

Section 1: Introduction

Section 2: Hazards Associated with Gases and Vapours

Section 3: Flammable Atmospheres

Section 4: Fire and Explosions

Section 5: Toxic Atmospheres

Section 6: Oxygen Deficiency and Oxygen Enrichment

Section 7: The Hazards of Confined Spaces

Section 8: The Gas Monitor

Section 9: Using Gas Testing Equipment when Carrying out Fire Watch Duties

Section 10: Using the Gas Testing Equipment to Clear an Area Prior to Hot Work

Section 11: Using the Gas Testing Equipment to Identify a Potential Gas Leak

Section 12: Using the Gas Testing Equipment to Test the Atmosphere of a Confined Space Prior to Entry

Section 13: Using the Gas Testing Equipment during Purging Operations

Section 14: Final Assessment

This course provides an introduction to the understanding of gas in high risk work situations.  It describes real dangers and explains about the most common types of gas.  The course provides increased understanding and knowledge of elements of risk when working in areas exposed to gas, and knowledge of how best to protect yourself, and others, using proper equipment. Users shall become acquainted with the possibilities and limitations presented by gas measurement equipment, in relevant situations.

Who is this course for?

Personnel requiring an awareness and understanding of hazardous substances risks and controls.

Is previous experience required?

You do not need prior knowledge or experience to complete this course.

How will this course benefit me?

This course provides learners with an awareness of working with hazardous substances

How will this course benefit my company?

By ensuring you are aware of working with hazardous substances so you can assist and inform best practice in your organisation.

What standards are referred to in this course?

This course does not refer to specific legislation or standards but is written according to industry best practice.

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.

Who is the course for?

All personnel involved in the transportation or supporting of a load by hand or bodily force.

Is previous experience required?

No previous experience is required to complete this course. 

How will the course benefit me?

The aim of this course is to increase learners’ awareness of the importance of safe manual handling operations and the risks involved with manual handling. The course also aims to outline best practices for the correct handling techniques for safe lifting; and for the pushing and pulling of loads.

How will the course benefit my company?

This course will benefit your company by reducing manual handling accidents.

What standards are referenced in the course?

• The Manual Handling Operations Regulations

• The Management of Health and Safety at Work Regulations

• Health and Safety at Work Act

• Health and Safety Executive (HSE)

Assessment Details

Course assessment with an 80% pass mark and two attempts.

Who is this course for?

All personnel who work in a role within the Oil and Gas Industry that may have an impact on the environment.

Is previous experience required?

No previous experience is required to complete this course.

How will this course benefit me?

This course aims to provide an introduction to the issues involved with successful environmental management in the Oil and Gas Industry.

How will this course benefit my company?

The course will benefit companies by ensuring that all relevant personnel have an understanding of the issues involved with successful environmental management in the Oil and Gas Industry, which will help to protect the environment.

What standards are referred to in this course?

• Department of Energy and Climate Change (BEIS (formally DECC))

• The Scottish Environment Protection Agency (SEPA) in Scotland

• The Environment Agency (EA) in England, Wales and Northern Ireland

• ISO 14001 Environmental Management Systems (EMS)

• British Standard Institute's BS7750 - Specification for Environmental Management Systems (BS11994)

• Integrated Pollution Prevention and Control (IPPC) Directive

• Control of Major Accident Hazards (COMAH) Regulations

Is there an assessment?

No

Course goal: This course provides learners with an awareness of the COSHH regulations, and how they control work with hazardous substances.

Target Audience: This course is aimed at all personnel working in the Oil and Gas Industry.

Learning Objectives

LO1 Explain the COSHH regulations and their applicability to the Oil and Gas Industry

LO2 Explain the legal obligations under COSHH for both employees and employers, and explain the REACH regulations

LO3 Explain the health effects of working with hazardous substances, and the various ways that these can enter the body

LO4 Explain the use of Safety Data Sheets, Labels and Assessments within the COSHH regulations

LO5 Explain the common labelling system and identify the standard symbols

LO6 Explain the appropriate use of Personal Protective Equipment

LO7 Explain requirements for storage, handling and disposal of hazardous substances

LO8 Define the control measures for handling hazardous substances and explain the control hierarchy

LO9 Explain the process for dealing with hazardous substances in the event of a spill

LO10 Define the recording and reporting process within the COSHH Regulations

The object of this course is to ensure that course participants maintain and update their knowledge of basic safety and emergency response.

After completing the course the students should have refreshed and upgraded their knowledge and proficiency in:

- The use of handheld fire extinguishers

- Lifesaving first aid

- Using an escape chute

- Correct use of a rescue suit with breathing apparatus

- Helicopter evacuation (HUET) (see comment under miscellaneous)

This course is valid for 48 months.

This course was first developed in 2014 by the laboratory company Kystlab AS, which was our company name back then. The scaling and development of our company have included both mergers and shareholder changes, and our name is now Nemko Norlab AS – a part of renowned Nemko Group. We are still the largest, Norwegian owned laboratory company, and “Clean water offshore” is still based on our company´s year-long experience with water laboratory analysis, including potable water offshore. In Nemko Norlab the scientific know-how is further strengthened, and the service portfolio to the offshore segment expanded significantly. All together we now conduct over 100.000 routine analyses annually related to drinking water.

New in the 5th Edition

- As with the Covid-19 virus, the focus on the lethal shower microbe Legionella is increasing offshore due to the risk of disease outbreak. The training course has therefore been further strengthened to prevent Legionella disease.

- The course is also updated according to new recommendations for the annual sampling program, changes that potentially will lower analysis costs.

- This edition has also been updated in accordance with current regulations, including an important change in authority responsibility. The Institute of Public Health is no longer responsible for anything offshore.

General course info

 - The course is well illustrated to provide the best possible understanding and interpretation of the comprehensive regulations.

- There are intuitive and useful exercises throughout the course. The course is available in both Norwegian and English.

- Based on «Safe, Sufficient and Good Potable Water Offshore», the course highlights situations the participant typically may encounter in everyday work.

For more info:

- Contact your Mintra Key Account Manager to order course licenses.

- Contact anne.kristin.gussias@nemkonorlab.com for professional inquiries.

Please note: this course is also available in an Norwegian-language version.

The course is delivered by the accredited laboratory NEMKO NORLAB AS. 

Course Goal: This course aims to provide an overview of management of change. The course focuses on the steps of the management of change process, the roles and responsibilities of personnel, and the risks involved in change management and their associated control measures.

Target Audience: All relevant personnel

Learning Objectives:

LO1 Explain why the effective management of change is an essential part of operations in the Oil and Gas Industry

LO2 Define ‘change’

LO3 Describe the key stages in the management of change process

LO4 Identify the key roles and responsibilities involved in effective management of change

LO5 Identify the risks associated with management of change

LO6 Explain how the risks associated with management of change can be managed