Maritime

Course catalogue

hits
97
Course code: MGM-041
Course type: E-learning course
Duration: 45 minutes
Language: English
Price: NOK 600,-

Who is this course for?

Maritime personnel who require an introduction to or awareness of maritime Protection and Indemnity insurance.

 

Is previous experience required?

You do not need prior knowledge or experience to complete this course. 

 

How will this course benefit me?

This course aims to provide personnel with an awareness of the principles of maritime Protection and Indemnity Insurance.

 

How will this course benefit my company?

By ensuring you have an understanding of the maritime Protection and Indemnity Insurance. 

 

What standards are referred to in this course?

The Marine Insurance Act.

 

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 70%.

Course code: NOV-002
Course type: Classroom course
Duration: 24 hours
Language: Norsk
Price: From NOK 22500,-

Dette kurset tilfredsstiller krav i Norsok R-003 tillegg B.8 og B.9 vedlikehold og verifikasjon av kompetanse. Simulator trening bør gjennomføres minst hvert tredje år for kranoperatører G5 offshorekran, dekksoperatører kan delta for å øke risikoforståelse, holde seg oppdatert på regelverk.

Målsetningen med kurset er at kranoperatør skal tilegne seg tilstrekkelig kunnskap om sikker bruk av G5 offshorekraner til å håndtere last internt på innretning, til og fra fartøy mellom faste eller flytende innretninger og undervannsløft på en sikker måte. Risikoforståelse, riktig adferd, teknisk systemforståelse og krav i NORSOK R-003 er hovedfokus under gjennomføring.


Kursinnhold: 
- Kartlegging av kompetanse
- Kjennskap til ulykker innen kran- og løfteoperasjoner
- Lover, forskrifter, standarder og brukermanual
- NORSOK R-003 sikker bruk av løfteutstyr
- Løfteinnretningens tekniske oppbygning og virkemåte
- Løfteinnretningens sikkerhetssystemer
- Vedlikehold og sakkyndig kontroll
- Planlegging av løfteoperasjoner
- Simulatortrening: kritiske løfteoperasjoner, personalløft med MOB-båt/personalbasket og løft under marginale værforhold
- Simulatortrening: Bruk av sikkerhetssystemer, AOPS, MOPS, nødlåring og nødkjøring
- Simulatortrening: fokus på personlig faktor og reaksjonsmøter
- Evaluering etter hver øvelse i simulator
- Teoretisk eksamen


Påmelding

- Påmeldingsskjema skal fylles ut og returneres sammen med en PO eller akseptert betalingsmetode.
- PO eller akseptert betalingsmetode kan sendes til RA-NOR-AMAdminSupport@nov.com. 
- Ordrebekreftelse og Joining Instruction vil bli sendt så snart deltakeren har fått plass.


Kansellering

- Hvis kjøper kansellerer mindre enn tretti (30) dager før oppstartsdato, vil kjøper bli belastet 100% av beløpet for opplæringen.
- Selger forbeholder seg retten til å kansellere og / eller planlegge ny dato på kurs med lav påmelding opptil to (2) uker før startdato for kurset.


No show

Ved manglende oppmøte, forbeholder selger seg retten til å fakturere kjøper for "no show" 100 % av beløpet for opplæringen.

 

NATIONAL OILWELL VARCO, L.P. OG DETS AFFILIATER VILKÅR OG BETINGELSER gjelder for alle kurs. 

Course code: MGM-139
Course type: E-learning course
Duration: 120 minutes
Language: English
Price: NOK 1500,-

Who is the course for?

Officers and Electrical Ratings working on low voltage installations.

Is previous experience required?

No previous experience is required to complete this course.

How will the course benefit me?

This course will give learners an overview of working on electrical installations.

How will the course benefit my company?

By ensuring you have the knowledge and competence to be working on low voltage installations.

What standards are referenced in the course?

Safety Regulations for Work and Operation of Electrical Equipment and Installations.

Is there an assessment? 

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 70%.

 

Course code: NOG-143-1
Course type: Classroom course
Duration: 4 days
Language: Norwegian
Price: From NOK 19500,-

The course is in accordance with the Norwegian oil and gas training curricula - courses in valve technology.  The course is a combination of theory and practical application and concludes with a web-based exam, which takes about 2 hours to complete.


This training will help participants make their daily work with valves simpler and safer.
 
Course Content
- Operate different valve types optimally
- See the difference between the different types of valves
- See if valves are functioning properly
- Test valves
- Perform 1st line maintenance
- Ensure that valves are and remain atmospherically sealed
- Dismantle and install valves on the line

Course code: KOL-001
Course type: Classroom course
Duration: 24 hours
Language: Norwegian
Price: From NOK 8000,-

Hovedmål med kurset er å gi personer som skal utøve rollene som signalgiver, anhuker, dekksoperatør, boredekksarbeider, rigger og operatør av løfteinnretning opplæring i vurdering og forståelse av farer samt sikker bruk, vedlikehold, daglig kontroll og kasseringsregler for ulike typer løfteredskap. Anhuker og signalgiver skal samhandle og kommunisere med operatør av løfteinnretning i enhver løfteoperasjon på en slik måte at uønskede hendelser unngås.

 

Kursinnhold
- Innledning
- Lover, forskrifter og standarder
- Personlig verneutstyr og farlig gods
- Krav til signaldgiver og anhuker
- Planlegge, gjennomføre og evaluere
- Oppbevaring, bruk og kontroll av løfteredskaper
- Sikkerhet for personell
- Kritiske løfteoperasjoner
- Løftetabeller
- Praktisk bruk løfteredskaper
- Evaluering og avsluttende prøve

 

Modul 1.1 (8 timer) Arbeidsmiljø, ansvar og konsekvenser 

Modul 2.3 (16 timer) G11- Løfteredskap 



This course is only available in Norwegian.

Course code: MGM-138
Course type: E-learning course
Duration: 120 minutes
Language: English
Price: NOK 1500,-

Who is the course for?

Officers and Electrical Ratings working on high voltage installations.

Is previous experience required?

No previous experience is required to complete this course.

How will the course benefit me?

This course will give learners an overview of working on electrical installations.

How will the course benefit my company?

By ensuring you have the knowledge and competence to be working on high voltage installations.

What standards are referenced in the course?

Safety Regulations for Work and Operation of Electrical Equipment and Installations.

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 70%.

Course code: MGM-089
Course type: E-learning course
Duration: 45 minutes
Language: English
Price: NOK 650,-

Who is the course for?

All Maritime personnel.

 

Is previous experience required?

No prior knowledge or experience is required to complete this course.

 

How will the course benefit me?

This course will provide knowledge of the risk associated with dropped objects.

 

How will the course benefit my company?

To assist in the reduction of lost time as a result of accidents.

 

What standards are referenced in the course?

There are no regulations or standards referenced in this course.

 

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 70%.

Course code: KOL-004
Course type: Classroom course
Duration: 24 hours
Language: Norwegian
Price: From NOK 12600,-

Kurset vil gi kranoperatører en god teoretisk grunnopplæring på bro og traverskraner slik at uhell og ulykker i forbindelse med løfteoparsjoner unngås. Opplæringen gir kandidatene god innsikt i prinsippene for traverskraners konstruksjon,virkemåte, vedlikehold og bruk. Ved bestått teoretisk og praktisk prøve, vil det gi grunnlag for utstedelse av kompetansebevis G4 Bro-og traverskraner.

Kursinnhold
- Innledning med krav til kranførerer
- Bruksområder for traverskraner
- Ulykker med bro- og traverskraner
- Oppbygging av forskjellige typer bro- og traverskraner
- Elektrisk anlegg på bro- og traverskraner
- Sikkerhetsbrytere 
- Ståltau / blokk 
- Sertifisering / dokumentasjon
- Kontroll og vedlikehold, sikkerhetsregler ved bruk

- Øvingsoppgaver 

- Eksamen

 

 

Modul 2.7 (16 timer) G4- Bro- og Traverskran 

Modul 3.7 - G4 (8 timer) Praktisk bruk

 

This course is only available in Norwegian.

Course code: MGM-055
Course type: E-learning course
Duration: 20 minutes
Language: English
Price: NOK 400,-

Who is the course for?

Deck crew and personnel who require knowledge on the inventory and storage of paints and coatings.

 

Is previous experience required?

No previous experience is required to complete this course.

 

How will the course benefit me?

By providing you with a basic understanding on the inventory and storage requirements of paints and coatings.

 

How will the course benefit my company?

By providing personnel with a basic understanding on the inventory and storage requirements of paints and coatings.

 

What standards are referenced in the course?

• The International Convention for the Safety of Life at Sea (SOLAS)

• The Hong Kong International Convention for the Safe and Environmentally Sound Recycling of Ships

• The European Union Ship Recycling Regulation

• Resolution MEPC.269(68) Guidelines for the Development of the Inventory of Hazardous Materials

 

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 70%.

Course code: MGM-141
Course type: E-learning course
Duration: 30 minutes
Language: English
Price: NOK 500,-

Who is the course for?

Deck Officers and Ratings who require knowledge on the storage and transport of different types of liquid.

Is previous experience required?

No previous experience is required to complete this course.

How will the course benefit me?

This course will give learners an overview of how liquids such as heavy fuel oils should be stored.

How will the course benefit my company?

The course will ensure that learners know how to safely store liquids, which will result in fewer safety incidents.

What standards are referenced in the course?

No regulations are standards are referenced in this course.

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 70%.

Course code: KOL-012
Course type: Classroom course
Duration: 1 day / 8 hours
Language: Norwegian
Price: From NOK 3800,-

Hensikten med kurset er å gi opplæring av riktig og sikker bruk av fallsikringsutstyr og bruk av redningsutstyr. Kurset gir kandidaten opplæring i hvordan de skal gjøre seg kjent med vedlikeholdsrutiner og produsentens bruksanvisning slik at fallsikrings- og redningsutstyr brukes på en riktig og sikker måte.

Leksjon 1 i Mod. O-2.2 og siste punkt i leksjon 2 i Mod. O-3.2


Kursinnhold
- Innledning
- Regelverk, standarder og retningslinjer
- Risikovurdering og risikohåndtering
- Konsekvenser av et fall i fallsikringsutstyr
- Kjennskap og ferdigheter til relevante typer fallsikringssystem, utstyr og metoder
- Krav til vedlikehold, oppbevaring og kontroll
- Skriftlig prøve

This course is only available in Norwegian.

Course code: KOL-003
Course type: Classroom course
Duration: 40 hours
Language: Norwegian
Price: From NOK 13000,-

Hensikten med kurset er å gi blivende kranførere god teoretisk og praktisk grunnopplæring på fastmonterte hydrauliske kraner. Kurset gir elevene god innsikt i prinsippene for kranens konstruksjon og virkemåte. Etter endt kurs med bestått teoretisk prøve vil denne sammen med bestått praktisk kjøreprøve være grunnlaget for utstedelse av kranførerbevis G20 Fastmontert hydrauliske kraner.

Opplæringen dekker kompetansekrav i NORSOK standard R003N for Kranfører G20. 

Kursinnhold
- G11 stroppekurs (se KOL-001)
- Innledning
- Konstruksjon
- Hydraulikk
- Mekanikk
- Lover / forskrifter / standarder
- Ståltau / vinsj / blokker
- Dokumentasjon
- Sikkerhetsbestemmelser
- Løfteredskap
- Øvingsoppgaver
- Eksamen

G4 Traverskran med praksis Modul 2.7, 3.7 + 4.7

Course code: KOL-015
Course type: Classroom course
Duration: 5 days / 40 hours
Language: Norwegian
Price: Not set

Kurset vil gi kranoperatører en god teoretisk grunnopplæring på bro og traverskraner slik at uhell og ulykker i forbindelse med løfteoparsjoner unngås. Opplæringen gir kandidatene god innsikt i prinsippene for traverskraners konstruksjon,virkemåte, vedlikehold og bruk. Ved bestått teoretisk og praktisk prøve, vil det gi grunnlag for utstedelse av kompetansebevis G4 Bro-og traverskraner.

Kursinnhold
- Innledning med krav til kranførerer
- Bruksområder for traverskraner
- Ulykker med bro- og traverskraner
- Oppbygging av forskjellige typer bro- og traverskraner
- Elektrisk anlegg på bro- og traverskraner
- Sikkerhetsbrytere 
- Ståltau / blokk 
- Sertifisering / dokumentasjon
- Kontroll og vedlikehold, sikkerhetsregler ved bruk

- Øvingsoppgaver 

- Eksamen

 

Modul 2.7 (16 timer) G4- Bro- og Traverskran 

Modul 3.7 - G4 (8 timer) Praktisk bruk

Modul 4.7 - G4 Bedriftsoppl. - 32 timer Oppl.virksomhet-16 timer

 

This course is only available in Norwegian.

Course code: MGM-115
Course type: E-learning course
Duration: 15 minutes
Language: English
Price: NOK 400,-

Who is the course for?

All personnel involved in scaffolding operations.

Is previous experience required?

No previous experience is required to complete this course.

How will the course benefit me?

This course will provide you with a brief overview of the requirements for safe scaffolding over sea.

How will the course benefit my company?

This course will provide personnel with a brief overview of the requirements for safe scaffolding over sea.

What standards are referenced in the course?

This course does not refer to specific legislation or standards.

Is there an assessment? 

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 70%.

Course code: BVS-037
Course type: E-learning course
Duration: 1 hour
Language: English
Price: EUR 100,-

Presentation

This training course provides general information about cybersecurity in the Maritime Industry. It describes the main cybersecurity issues regarding the use of computer-based equipment in the professional environment and proposes ways to protect oneself from hackers.

Objectives

On completion of the training, students will be able to:

Understand that we are living in a digital ultra-connected world;

Know about main cyberattacks and ways to keep protected from them;

Enforce main cybersecurity rules on ships;

Understand Internet best practices and implement them;

Be cautious when using social networks.

Program

Digital revolution

o Digitalization transforms the world, your environment, your work on ships

o You are connected = you are vulnerable

o Internet is NOT a lawless zone

Cyberattacks on board and on a daily basis

o What is ransomware, and how to react to it

o How to use antivirus

o How to care about and protect data

o Why updates are necessary

o Why be cautious with unknown Wi-Fi networks

E-mail (professional and personal) best practices

o How to recognize corrupted e-mails from legit ones

o Think before you click

o How to react to the detection of a suspicious e-mail

Passwords

o How to protect them, how to generate them

Social networks

o Have you become a “like” addict

o Protect your e-reputation

o Protect your Company e-reputation

Your digital environment on board

o Your ship is like a connected factory

o How to react in case of a potential cybersecurity breach/incident

Certificate

On completion of the training program, the student will be awarded:

A Certificate of Cybersecurity Awareness in Maritime Environment, issued by Bureau Veritas

Solutions Marine & Offshore.

The Certificate of Cybersecurity Awareness in Maritime Environment is obtained after completing the course and passing the online test.

Course code: MGM-129
Course type: E-learning course
Duration: 15 minutes
Language: English
Price: NOK 400,-

Who is the course for?

Maritime personnel preparing for an SRC/VHF exam.

 

Is previous experience required?

No previous experience is required to complete this exam.

 

How will the course benefit me?

By learning the whole SRC/VHF curriculum in a simple and easy to understand way.

 

How will the course benefit my company?

By ensuring optimal preparation of candidates prior of taking the SRC/VHF exam.

 

What standards are referenced in the course?

ITU Radio Regulations

 

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 70%.

Course code: EXT-007
Course type: Blended course
Duration: 5 hours + 1 day cla ...
Language: Norwegian
Price: From NOK 11200,-

This course combines self-study by e-learning and classroom training with demonstrations and examples which is useful when working in explosive atmospheres.

This course is made for personnel involved in selection, erection, inspection and maintenance of equipment for potentially explosive atmospheres.

The courses give an introduction and repetition in different subjects treated in the relevant IEC 60079 Standards (NEK EN 60079).

Course code: EXT-006
Course type: Blended course
Duration: 8-hour e-learning + ...
Language: English, Norwegian
Price: From NOK 11200,-

This course combines self-study by e-learning and classroom training with demonstrations and examples which is useful when working in explosive atmospheres.

The course is suitable for personnel who should have an introduction in potentially explosive areas, marking, equipment, and requirements.

Participants will be introduced to the relevant parts of the NEK 420, IEC 60079 standard (NEK EN 60079-standards) as well as national adaptations where relevant.

Course code: STQ-011
Course type: Classroom course
Duration: Theoretical e-learn ...
Language: Norwegian
Price: From NOK 13500,-

Objective: The purpose of the training is to provide personnel working with load securing with basic training in load securing and user control of load carriers.


The course satisfies the requirement for documented training in the Regulations on the performance of work best. no. 703, Norsok R-003N and NOG 116, and is carried out with theory and practice according to training plan O-2.6.

The course consists of 4 hours of theoretical e-learning and 16 hours of practical training in classrooms / practice rooms.

The practical training ends with a practical test to ensure that each participant has acquired sufficient knowledge of:

- Proper use of personal protective equipment
- User control of load carriers and assessment of whether it can be used
- Plan and carry out packing and securing of a given load
- Correct securing of the work area
- Choose the right load carrier
- Proper use of various load securing equipment


Content theory

- Introduction
- Unwanted events and non-conformance reporting
- Risk assessment
- Regulations, standards and NOG guidance
- Documentation
- Personal protective equipment
- Various load carriers, planning, user control and packaging
- Use and control of load securing equipment
- Theoretical exam

Practical exercises

- Use of personal protective equipment
- Implementation of user control
- Plan and carry out loading and securing of cargo
- Proper use of auxiliary tools
- Checklists
- Safety during work
- Use of barriers
- Practical exam

Course code: BVS-001
Course type: E-learning course
Duration: 2 hours
Language: English
Price: EUR 280,-

Presentation 

This training course provides general information about welding of aluminium structures. It contains an introduction to aluminium properties and describe the main issues regarding weldability of aluminium and its alloys. 

Objectives 

On completion of the training, students will be able to: 

Know the properties of aluminium and its alloys comparing to steel 

Understand the issues regarding weldability of aluminium alloys 

Recognize the main problems that can arise during design and production of aluminium ship’s structures 

Know the suitable welding processes for joining of aluminium ship hull 

Understand the application of bimetallic joints. 

Program 

Properties of aluminium alloys 

o Specific properties 

o Heat treatable and non-heat treatable aluminium alloys 

o Marine aluminium alloys 

o Designation of aluminium alloys 

Weldability of aluminium 

o Characteristics of aluminium referring to welding 

o Main issues: gas porosity, oxide inclusions and lack of fusion, hot cracking, reduced 

strength in the weld and heat affected zone, distortion 

o Choice of filler material 

Welding processes for aluminium 

o MIG aluminium welding 

o TIG aluminium welding 

o Typical defects in aluminium welding 

Joining of steel and aluminium in shipbuilding 

o Bimetallic strip for transition joints 

Preparation and design of welds 

o Guidelines for aluminium joint design 

o Examples of joints 

o Application of backing 

o Defects caused by poor preparation 

o Recommendations for aluminium welding

Certificate 

On completion of the training program, the student will be awarded the following qualifications:

Certificate of Aluminium Welding awarded by Bureau Veritas Solutions Marine & Offshore.

The Certificate of Aluminium Welding, issued by Bureau Veritas Solutions Marine & Offshore, is obtained after completing the course and passing the qualification examination. 

Hits per page