Course catalogue

This course aims to provide all relevant personnel with the knowledge required to understand the hazards and controls associated with the use of abrasive wheels.

Learning Objectives

- Explain what is meant by the term ‘Abrasive Wheel’

- Describe typical regulatory requirements for abrasive wheels

- Give examples of different types of abrasive wheels

- Explain how abrasive wheels operate

- Explain the importance of using guards during grinding operations

- Explain the requirements for portable and hand-held grinding machines

- Explain the main hazards of grinding operations

- Give examples of common problems faced when using abrasive wheels

- Explain what the PPE requirements are during grinding operations

- Identify the safety measures that must be in place during grinding operations

Fall protection is a course on the basics of fall protection for anyone working above ground.

This course outlines the laws and regulations related to fall protection. It contains information about active as well as passive protection gear, as well as first aid related to falls from a height. Upon completion of the course one will have information about the various aspects of fall protection. One will also learn how to carry out ones work in a safe and secure manner within the confines of the applicable laws and regulations.

Who is the course for?

All personnel who have a role in preparing and executing a medical evacuation.

Is previous experience required?

No previous experience is required to complete this course.

How will the course benefit me?

This course will give learners an awareness in relation to conducting an emergency evacuation for medical reasons in a safe manner.

How will the course benefit my company?

The course will ensure that learners are following best practice as detailed in national/international legislation, and company procedures.

What standards are referenced in the course?

International Safety Management (ISM) Code 

• The International Convention for the Safety of Life at Sea (SOLAS) 

• The Maritime Labour Convention (MLC)

• International Convention on Standards of Training, Certification and Watchkeeping for Seafarers (STCW)

Is there an assessment? 

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 70%.

Who is the course for?

All maritime personnel

Is previous experience required?

You do not previous experience to complete this course.

How will the course benefit me?

By providing you with an awareness of how loud noise can have a detrimental effect on your hearing

How will the course benefit my company?

By protecting personnel from hearing loss and improving communication

What standards are referenced in the course?

Maritime Labour Convention (MLC)

UK Maritime and Coastguard Agency’s Code of Safe Working Practices for Seamen.

Is there an assessment?

Yes

This course covers the theoretical part of the basic safety training for seafarers, which is mandatory for all personnel working on vessels. Through tuition and training in preventive safety, first aid, sea rescue and fire safety, the course teaches you to take care of your own safety and that of others. By taking the theoretical part of the course online, you cut down the time you need to attend an approved safety centre and save both time and money. 

This course provides an introduction to the understanding of gas in high risk work situations.  It describes real dangers and explains about the most common types of gas.  The course provides increased understanding and knowledge of elements of risk when working in areas exposed to gas, and knowledge of how best to protect yourself, and others, using proper equipment. Users shall become acquainted with the possibilities and limitations presented by gas measurement equipment, in relevant situations.

Course Content

- Introduction

- Relevant terms

- Air and closed spaces

- Oxygen measurement

- Explosive gases

- Toxic gases

- Conclusion

Who is this course for?

All relevant personnel.

Is previous experience required?

You do not need prior knowledge or experience to complete this course and it is assumed that you are competent in your designated role

How will this course benefit me?

This course aims to provide an overview of an employees right to implement their 'Stop Work Authority'. This course in Stop Work Authority is divided into and covers the following topics: Imminent danger, stop work procedure, right to refuse work and unsafe conditions.

How will this course benefit my company?

By ensuring you are aware of an employees right to omplement their 'Stop Work Authority'.

What standards are referred to in this course?

N/A

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 100%.

Who is the course for?
This eLearning course is aimed at individuals who are required to travel overseas on business, particularly to high-risk locations where there is a threat of criminal activity, civil unrest and terrorism.

Is previous experience required?
There is no requirement for prior knowledge or experience before completing this course and it is assumed that you are competent in your designated role.

How will the course benefit me?
When you travel somewhere new, your lack of local knowledge can mean that you may be more likely to be targeted by criminals. This course will give you a basic understanding of the threats commonly faced by travellers and explain how you can reduce the likelihood of a health or security incident.

The knowledge gained in this course will help you to assess your personal risk so that you can stay safe while travelling. It will also outline the basic principles of safety and security.

How will the course benefit my company?
By ensuring you are fully aware of the risks that you may face when travelling, you can keep yourself, and your company's assets and information, safe.

What standards are referenced in the course?
This course does not contain reference to specific legislation or standards but is written to current travel security guidelines and industry best practice.

Is there an assessment?
Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 100%.

The course covers the following topics:

- Act and Regulations
- Purpose
- Responsibility
- Participants and roles
- Internal control regulations

At the beginning of the course you can take a pre-test, where you get the opportunity to show your skills. If you pass the pre-test, you do not have to go through the entire course.

Who is the course for?

All maritime personnel involved in the management of change process.

Is previous experience required?

No previous experience is required to complete this course.

How will the course benefit me?

This course will provide you with an overview of the management of change process.

How will the course benefit my company?

This course will provide personnel with an overview of the steps involved in the management of change process, the roles and responsibilities of personnel, the risks involved in change management and how these risks can be controlled.

What standards are referenced in the course?

This course does not refer to specific legislation or standards.

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 70%.

Who is the course for?

Engineers of all grades.

Is previous experience required?

You do not need prior knowledge or experience to complete this course and it is assumed that you are competent in your designated role.

How will the course benefit me?

By providing you with an overview of potable water systems.

How will the course benefit my company?

This course aims to provide personnel with an overview of the safe use and maintenance of potable water systems.

What standards are referenced in the course?

This course does not refer to specific legislation or standards.

Is there an assessment? 

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 70%.

Who is the course for?

All Maritime personnel.

Is previous experience required?

Previous experience is not required to complete this course.

How will the course benefit me?

By providing you with an overview of Safety Data Sheets (SDS) and how to use them.

How will the course benefit my company?

By increasing personnel’s awareness of the safe use and storage of hazardous substances.

What standards are referenced in the course?

• The Globally Harmonized System of Classification and Labelling of Chemicals (GHS)

• International Maritime Dangerous Goods (IMDG) Code and MARPOL Annex III

• The Registration, Evaluation, Authorisation and restriction of CHemicals (REACH) Regulation

• The Control of Substances Hazardous to Health (COSHH) Regulations

• European Agreement concerning the International Carriage of Dangerous Goods by Road (ADR)

• International Maritime Dangerous Goods (IMDG) Code

• International Air transport Association (IATA), and

• Carriage of Dangerous Goods and Use of Transportable Pressure Equipment Regulations (CDG)

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 70%.

The course covers the following topics:

- Which companies should have a Working Environment Committee (AMU)?
- How to organize the a Working Environment Committee (AMU)?
- What is a Working Environment Committee (AMU)?

At the beginning of the course you can take a pre-test, where you get the opportunity to show your skills. If you pass the pre-test, you do not have to go through the entire course.

Who is the course for?

All Maritime personnel who require knowledge of Legionella bacteria.

Is previous experience required?

No prior knowledge or experience is required to complete this course.

How will the course benefit me?

To provide learners with knowledge of Legionella and the methods to reduce the risk of infection.

How will the course benefit my company?

To provide guidance on how to reduce legionella infections.

What standards are referenced in the course?

No standards of regulations are referenced in this course.

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 70%.

Who is this course for?

All shipboard and shore-based personnel requiring an understanding of a vessel’s statical stability.

Is previous experience required?

No previous experience is required to complete this course.

How will this course benefit me?

By providing you with a basic understanding of the principles of ship stability.

How will this course benefit my company?

By ensuring personnel are aware of the ship’s stability and the factors influencing stability in order to minimise incidents.

What standards are referred to in this course?

None

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 70%.

Who is this course for?

All seafarers, shipboard or shore-based office personnel who require an introduction to ship stability. 

Is previous experience required?

No previous experience is required. 

How will this course benefit me?

By providing learners with a basic understanding of the principles of ship stability.

How will this course benefit my company?

By increasing company personnel’s awareness and understanding of ship stability and thus decreasing the chance of related incidents.

What standards are referred to in this course?

This course does not refer to specific legislation or standards but is written according to industry best practice.

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 70%.

Who is this course for?
All relevant personnel.

Is previous experience required?
You do not need prior knowledge or experience to complete this course and it is assumed that you are competent in your designated role

How will this course benefit me?
This course aims to provide personnel with an overview of how the Working Time Regulations impact on their working hours and the importance of effectively managing and assess the risks posed by fatigue in the workplace.

How will this course benefit my company?
By ensuring you have an overview of how the Working Time Regulations impact on their working hours and the importance of effectively managing and assess the risks posed by fatigue in the workplace.

What standards are referred to in this course?
N/A

Is there an assessment?
Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.

Provided in association with Astutis, approved centre 1857.

IOSH Managing Safely is a basic risk management health and safety certificate which will offer managers an understanding of the practical actions needed for the health and safety of their teams.

It enables organizations to demonstrate a commitment to health and safety standards by ensuring managers and supervisors are aware of their responsibilities and the positive actions they can take to ensure a safe a healthy working environment.

On completion of the course, learners will be able to:

• Understand your responsibilities for safety in the workplace.

• Recognise common workplace hazards and implement appropriate control measures.

• Estimate, evaluate and reduce risk by applying a hierarchy of risk control.

• Undertake structured risk assessments and accident investigations.

• Understand the requirements of HSE legislation.

• Recognise different ways to measure and improve health and safety performance.

Who is the course for?

All offshore and onshore personnel who require an awareness of the hazards involved in working at height.

Is previous experience required?

No previous experience is required to complete this course.  

How will the course benefit me?

By increasing your awareness of the potential hazards of working at height and the steps that can be taken to reduce your risk of injury.

How will the course benefit my company?

This course is aligned to industry best practice and aims to make personnel aware of the protentional hazards of working at height and the controls that can be implemented to reduce risk.

What standards are referenced in the course?

Work at Height Regulations

Is there an assessment? 

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.

Provided in association with Astutis, approved centre 1857.

IOSH Working Safely is an essential short course for employees of organisations in any industry sector who need a grounding in health and safety. 

Provides an awareness of general workplace hazards and focuses on why health and safety is important to the well-being of the individual worker and those around them.

On completion of the course, learners will be able to:

• Why staff must work safely

• Staff's responsibility towards health, safety and wellbeing

• The difference between hazards and risks

• Hazard and risk identification, impact and how to control them

• The importance of safety performance within the workplace and how to improve it

• How industry affects the environment