Course catalogue

Who is this course for?

All personnel who require basic fire safety knowledge and/or refreshed on the topic.

Is previous experience required?

You do not need prior knowledge or experience to complete this course. 

How will this course benefit me?

This course gives the learner a basic understanding of the various fundamentals of fire prevention, detection and extinguishing methods, as well as personal protective equipment for firefighting. 

How will this course benefit my company?

By ensuring you have a basic understanding of the various fundamentals of fire prevention, detection and extinguishing methods, as well as personal protective equipment for firefighting. 

What standards are referred to in this course?

The course is based upon the STCW Basic Fire Fighting (A-VI/1-2)

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.

Who is the course for?

All Maritime personnel who work with hand and power tools.

Is previous experience required?

No prior knowledge or experience is required to complete this course.

How will the course benefit me?

This course will provide knowledge on hand and power tool safety.

How will the course benefit my company?

This course is intended to help prevent lost time accidents.

What standards are referenced in the course?

There are no regulations or standards referenced in this course.

Is there an assessment? 

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 70%.

Who is the course for?

All personnel involved in carrying out tasks under a Permit to Work system and those responsible for the Control of Work.

Is previous experience required?

No previous experience is required to complete this course.

How will the course benefit me?

This course will provide learners with an overview of the requirements and operation of a typical Permit to Work system

How will the course benefit my company?

By ensuring that personnel are familiar with the requirements and operation of a typical Permit to Work system.

What standards are referenced in the course?

The International Maritime Organization (IMO)

Health and Safety at Work Act

Is there an assessment? 

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 70%.

This course aims to provide learners with an overview of industry best practice in relation to confined space entry work.

Learning Objectives

- LO1 Explain what is meant by a Confined Space
- LO2 Give examples of Confined Spaces
- LO3 Describe the dangers that can be caused by confined space entry work
- LO4 Identify the legal requirements associated with confined space entry work
- LO5 Explain how to avoid entering confined spaces
- LO6 Explain the importance of having a Safe System of Work in place
- LO7 Describe individual roles and responsibilities involved in Confined Space Entry work
- LO8 Explain the requirements for gas testing
- LO9 Identify acceptable levels for atmospheric test results
- LO10 Give examples of Confined Space Entry site safety equipment
- LO11 Explain the actions to take in an emergency situation
- LO12 Explain Confined Space Entry alarm procedures

Who is this course for?
All personnel who are at risk for being exposed to benzene.

Is previous experience required?
You do not need prior knowledge or experience to complete this course.

How will this course benefit me?
This course aims to provide learners with an awareness of benzene and provide best practice for work with benzene in oil and gas producing facilities.

How will this course benefit my company?
By ensuring you are aware of the impacts of benzene and familiar with best practice for work with benzene.

What standards are referred to in this course?
Norwegian Oil&Gas circulars NOG 130, 131&133
SOLAS - II/2/16.3.2
IMO circulars 1095 and 1220

Is there an assessment?
Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.

Who is the course for?

All Maritime personnel.

Is previous experience required?

No prior knowledge or experience is required to complete this course.

How will the course benefit me?

To provide knowledge of Portable Fire Extinguishers

How will the course benefit my company?

To aid in the reduction of fire incidents on vessels.

What standards are referenced in the course?

International Code for Fire Safety Systems (FSS Code)

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 70%.

Who is the course for?

Personnel that may be exposed to environments containing nitrogen.

Is previous experience required?

No previous experience is required to complete this course.

How will the course benefit me?

By providing knowledge in the risks of entering a nitrogen environment.

How will the course benefit my company?

By reducing Nitrogen exposure risks.

What standards are referenced in the course?

No standards or regulations are referenced in this course. 

Is there an assessment? 

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 70%.

Who is the course for?

All Engineering Officers.

Is previous experience required?

No previous experience is required to complete this course.

How will the course benefit me?

This course will provide knowledge of isolation techniques.

How will the course benefit my company?

Improve safe isolation of systems.

What standards are referenced in the course?

This course does not refer to specific legislation or standards.

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 70%.

Who is this course for?
All relevant personnel.

Is previous experience required?
You do not need prior knowledge or experience to complete this course.

How will this course benefit me?
This course provides drug and alcohol awareness, information on company policies, and the effects of alcohol abuse, illegal drug use, and the abuse of prescription drugs.

How will this course benefit my company?
By ensuring you have a basic understanding of the drug and alcohol awareness, information on company policies, and the effects of alcohol abuse, illegal drug use, and the abuse of prescription drugs.

What standards are referred to in this course?
N/A

Is there an assessment?
Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 70%.

Who is this course for?

All relevant personnel, including work party members, Performing Authorities and Area Authorities

Is previous experience required?

You do not need prior knowledge or experience to complete this course and it is assumed that you are competent in your designated role

How will this course benefit me?

This course aims to provide the knowledge and techniques for carrying out effective toolbox talks

How will this course benefit my company?

By ensuring you have knowledge and know of techniques for carrying out effective toolbox talks

What standards are referred to in this course?

Control of Substances Hazardous to Health (COSHH) assessment

Safety Data Sheets (SDS)

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.

This course aims to provide all relevant personnel with the knowledge required to understand the hazards and controls associated with the use of abrasive wheels.

Learning Objectives

- Explain what is meant by the term ‘Abrasive Wheel’

- Describe typical regulatory requirements for abrasive wheels

- Give examples of different types of abrasive wheels

- Explain how abrasive wheels operate

- Explain the importance of using guards during grinding operations

- Explain the requirements for portable and hand-held grinding machines

- Explain the main hazards of grinding operations

- Give examples of common problems faced when using abrasive wheels

- Explain what the PPE requirements are during grinding operations

- Identify the safety measures that must be in place during grinding operations

Who is the course for?

All personnel who have a role in preparing and executing a medical evacuation.

Is previous experience required?

No previous experience is required to complete this course.

How will the course benefit me?

This course will give learners an awareness in relation to conducting an emergency evacuation for medical reasons in a safe manner.

How will the course benefit my company?

The course will ensure that learners are following best practice as detailed in national/international legislation, and company procedures.

What standards are referenced in the course?

International Safety Management (ISM) Code 

• The International Convention for the Safety of Life at Sea (SOLAS) 

• The Maritime Labour Convention (MLC)

• International Convention on Standards of Training, Certification and Watchkeeping for Seafarers (STCW)

Is there an assessment? 

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 70%.

Who is the course for?

All maritime personnel

Is previous experience required?

You do not previous experience to complete this course.

How will the course benefit me?

By providing you with an awareness of how loud noise can have a detrimental effect on your hearing

How will the course benefit my company?

By protecting personnel from hearing loss and improving communication

What standards are referenced in the course?

Maritime Labour Convention (MLC)

UK Maritime and Coastguard Agency’s Code of Safe Working Practices for Seamen.

Is there an assessment?

Yes

This course covers the theoretical part of the basic safety training for seafarers, which is mandatory for all personnel working on vessels. Through tuition and training in preventive safety, first aid, sea rescue and fire safety, the course teaches you to take care of your own safety and that of others. By taking the theoretical part of the course online, you cut down the time you need to attend an approved safety centre and save both time and money. 

Who is this course for?

All relevant personnel.

Is previous experience required?

You do not need prior knowledge or experience to complete this course and it is assumed that you are competent in your designated role

How will this course benefit me?

This course aims to provide an overview of an employees right to implement their 'Stop Work Authority'. This course in Stop Work Authority is divided into and covers the following topics: Imminent danger, stop work procedure, right to refuse work and unsafe conditions.

How will this course benefit my company?

By ensuring you are aware of an employees right to omplement their 'Stop Work Authority'.

What standards are referred to in this course?

N/A

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 100%.

Who is the course for?
This eLearning course is aimed at individuals who are required to travel overseas on business, particularly to high-risk locations where there is a threat of criminal activity, civil unrest and terrorism.

Is previous experience required?
There is no requirement for prior knowledge or experience before completing this course and it is assumed that you are competent in your designated role.

How will the course benefit me?
When you travel somewhere new, your lack of local knowledge can mean that you may be more likely to be targeted by criminals. This course will give you a basic understanding of the threats commonly faced by travellers and explain how you can reduce the likelihood of a health or security incident.

The knowledge gained in this course will help you to assess your personal risk so that you can stay safe while travelling. It will also outline the basic principles of safety and security.

How will the course benefit my company?
By ensuring you are fully aware of the risks that you may face when travelling, you can keep yourself, and your company's assets and information, safe.

What standards are referenced in the course?
This course does not contain reference to specific legislation or standards but is written to current travel security guidelines and industry best practice.

Is there an assessment?
Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 100%.

Who is the course for?

All maritime personnel involved in the management of change process.

Is previous experience required?

No previous experience is required to complete this course.

How will the course benefit me?

This course will provide you with an overview of the management of change process.

How will the course benefit my company?

This course will provide personnel with an overview of the steps involved in the management of change process, the roles and responsibilities of personnel, the risks involved in change management and how these risks can be controlled.

What standards are referenced in the course?

This course does not refer to specific legislation or standards.

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 70%.

Who is the course for?

Engineers of all grades.

Is previous experience required?

You do not need prior knowledge or experience to complete this course and it is assumed that you are competent in your designated role.

How will the course benefit me?

By providing you with an overview of potable water systems.

How will the course benefit my company?

This course aims to provide personnel with an overview of the safe use and maintenance of potable water systems.

What standards are referenced in the course?

This course does not refer to specific legislation or standards.

Is there an assessment? 

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 70%.

Who is the course for?

All Maritime personnel.

Is previous experience required?

Previous experience is not required to complete this course.

How will the course benefit me?

By providing you with an overview of Safety Data Sheets (SDS) and how to use them.

How will the course benefit my company?

By increasing personnel’s awareness of the safe use and storage of hazardous substances.

What standards are referenced in the course?

• The Globally Harmonized System of Classification and Labelling of Chemicals (GHS)

• International Maritime Dangerous Goods (IMDG) Code and MARPOL Annex III

• The Registration, Evaluation, Authorisation and restriction of CHemicals (REACH) Regulation

• The Control of Substances Hazardous to Health (COSHH) Regulations

• European Agreement concerning the International Carriage of Dangerous Goods by Road (ADR)

• International Maritime Dangerous Goods (IMDG) Code

• International Air transport Association (IATA), and

• Carriage of Dangerous Goods and Use of Transportable Pressure Equipment Regulations (CDG)

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 70%.

Who is the course for?

All Maritime personnel who require knowledge of Legionella bacteria.

Is previous experience required?

No prior knowledge or experience is required to complete this course.

How will the course benefit me?

To provide learners with knowledge of Legionella and the methods to reduce the risk of infection.

How will the course benefit my company?

To provide guidance on how to reduce legionella infections.

What standards are referenced in the course?

No standards of regulations are referenced in this course.

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 70%.