Course catalogue

The course covers the following topics:

- Act and Regulations
- Purpose
- Responsibility
- Participants and roles
- Internal control regulations

At the beginning of the course you can take a pre-test, where you get the opportunity to show your skills. If you pass the pre-test, you do not have to go through the entire course.

The course gives you a basic understanding of the principles of intrinsically safe loops (IS) in potentially explosive areas.

After completing the course, the candidate will have acquired the necessary knowledge about the design of intrinsically safe (IS), choice of equipment, inspection and maintenance in potentially explosive areas.

Our aim is to ensure that the employees are motivated to work safely and securely.

The course lasts 5 hours and the course certificate is valid for 5 years

The e-learning course can also be used as a refresher after 5 years

Themes:

• Understand the general principles for the type of specific protection and correct marking of components approved in intrinsically safe systems (IS)

• Current standard for Exi

• Construction and assessment of intrinsically safe equipment

• Assessment and concrete use of “simple apparatus app”

• Be able to choose and install the correct Exi equipment in hazardous areas according to the standards IEC 60079-14 and 60079-25

• How to work safely with IS

• Competence requirements for performing work on Exi installations

• How to verify and calculate an Exi circuit

• Know where to find and how to read relevant standards, data sheets, product sheets and other relevant literature

Who is this course for?

Everyone working on high voltage installations.

Is previous experience required?

You do not need prior knowledge or experience to complete this course and it is assumed that you are competent in your designated role

How will this course benefit me?

The course meets the requirements set in § 7 of the ""Safety Regulations for Work and Operation of Electrical Equipment and Installations- FSE"", that relevant personnel shall be given annual training and instruction in FSE. The course also provides the necessary training and instruction in first aid, focusing on electrical injuries, with the exception of the mandatory practical training in cardio-pulmonary resuscitation (CPR).

The regulations of various authorities make FSE applicable to all those working with electricity, whether on board ship, on platforms or on land. This course is suitable for all, regardless of which industry you work in. 

The authorities require that training in FSE and first aid in the event of electrical accidents is undertaken at least once a year. No more than 12 months shall elapse between training courses.

How will this course benefit my company?

By ensuring you have the knowledge and competence to be working on high voltage installations.

What standards are referred to in this course?

 § 7 of the ""Safety Regulations for Work and Operation of Electrical Equipment and Installations- FSE""

Is there an assessment?

The fast track version of the FSE course starts with a pre-test which checks the participant's knowledge of FSE. Depending on the answers given, the participant will get a course that is tailored to the level of knowledge revealed in the pre-test. The fast track version of the course is suitable for all but is particularly practical for those undertaking refresher training in FSE. 

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.

Who is this course for?

All personnel who require  knowledge and/or refreshed on IMO Codes and their application.

Is previous experience required?

You do not need prior knowledge or experience to complete this course. 

How will this course benefit me?

This course gives the learner the basic understanding and awareness of the maritime industry’s core conventions and codes as they apply to safety and pollution prevention

How will this course benefit my company?

By ensuring you have a basic understanding and awareness of the maritime industry’s core conventions and codes as they apply to safety and pollution prevention.

What standards are referred to in this course?

Overview of the IMO Conventions; STCW, SOLAS, MARPOL, BALLAST WATER, COLREG, ILO AND MLC

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.

Course Goal:

To ensure that the safety aspects of pressure testing and leak testing are known.

Who is the course for?

Engineers of all grades.

Is previous experience required?

No previous experience is required.

How will the course benefit me?

To ensure that the safety aspects of pressure testing and leak testing are known.

How will the course benefit my company?

To reduce possible pressure testing and leak testing safety related incidents.

What standards are referenced in the course?

n/a

Is there an assessment? 

Yes

Who is the course for?

Engineers of all grades.

Is previous experience required?

You do not need prior knowledge or experience to complete this course and it is assumed that you are competent in your designated role.

How will the course benefit me?

By providing you with an overview of potable water systems.

How will the course benefit my company?

This course aims to provide personnel with an overview of the safe use and maintenance of potable water systems.

What standards are referenced in the course?

This course does not refer to specific legislation or standards.

Is there an assessment? 

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 70%.

Who is the course for?

All Maritime personnel.

Is previous experience required?

Previous experience is not required to complete this course.

How will the course benefit me?

By providing you with an overview of Safety Data Sheets (SDS) and how to use them.

How will the course benefit my company?

By increasing personnel’s awareness of the safe use and storage of hazardous substances.

What standards are referenced in the course?

• The Globally Harmonized System of Classification and Labelling of Chemicals (GHS)

• International Maritime Dangerous Goods (IMDG) Code and MARPOL Annex III

• The Registration, Evaluation, Authorisation and restriction of CHemicals (REACH) Regulation

• The Control of Substances Hazardous to Health (COSHH) Regulations

• European Agreement concerning the International Carriage of Dangerous Goods by Road (ADR)

• International Maritime Dangerous Goods (IMDG) Code

• International Air transport Association (IATA), and

• Carriage of Dangerous Goods and Use of Transportable Pressure Equipment Regulations (CDG)

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 70%.

The VIRSEC Maritime English Test for Deck Ratings is designed to assist ship operators and employers make recruiting decisions by assessing the English language competency of Seafarers at a Deck Rating position working on board any vessel.

The Test is designed around the approved guidelines for Maritime English developed by the IMO. These guidelines are combined with internationally recognised methods for English language testing to form a rigorous and accurate testing system.

Regulations:

The English Tests are designed from the ground up using approved guidelines from the International Maritime Organisation (IMO Model English course 3.17); IMO Standard Marine Communication Phrases (SMCPs); and consistent with the framework set out by the Standards of Training, Certification and Watchkeeping.

Why Take This Test With VIRSEC:

What makes VIRSEC different from the others? Below are some of the benefits of taking this online Test with VIRSEC:

• CPD Accredited Online Test
• Randomised Questioning
• Adheres to International Standards
• Position-Focused Questions
• Assesses 5 Primary Language Skills

Test Duration:

The user must attempt the Test in 90 minutes, and in one sitting. If a candidate does not complete the exam within the duration, they will fail any unanswered questions.

The VIRSEC Maritime English Test for Junior Deck Officers is designed to assist ship operators and employers make recruiting decisions by assessing the English language competency of Seafarers at a Junior Officer position working on board any vessel.

The Test is designed around the approved guidelines for Maritime English developed by the IMO. These guidelines are combined with internationally recognised methods for English language testing to form a rigorous and accurate testing system.

Regulations:

The English Tests are designed from the ground up using approved guidelines from the International Maritime Organisation (IMO Model English course 3.17); IMO Standard Marine Communication Phrases (SMCPs); and consistent with the framework set out by the Standards of Training, Certification and Watchkeeping.

Why Take This Test With VIRSEC:

What makes VIRSEC different from the others? Below are some of the benefits of taking this online Test with VIRSEC:

• CPD Accreditated Online Test
• Randomised Questioning
• Adheres to International Standards
• Position-Focused Questions
• Assesses 5 Primary Language Skills

Test Duration:

The user must attempt the Test in 90 minutes, and in one sitting. If a candidate does not complete the exam within the duration, they will fail any unanswered questions.

Who is this course for?

Trainee Oil and Gas Operations Technicians

Is previous experience required?

You do not need prior knowledge or experience to complete this course.

How will this course benefit me?

This course aims to provide an overview of fuel systems

How will this course benefit my company?

By ensuring you have an overview of fuel systems

What standards are referred to in this course?

This course does not refer to specific legislation or standards but is written according to industry best practice.

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.

Section 7 of the “Safety Regulations for Work and Operation of Electrical Equipment and Installations” (FSE) sets requirements for yearly FSE training for relevant personnel. This e-learning course takes you through the requirements of the regulations and gives you training and instruction in FSE. The course focuses on safety for work on low voltage installations.

Who is the course for?

Officers and Electrical Ratings working on high voltage installations.

Is previous experience required?

No previous experience is required to complete this course.

How will the course benefit me?

This course will give learners an overview of working on electrical installations.

How will the course benefit my company?

By ensuring you have the knowledge and competence to be working on high voltage installations.

What standards are referenced in the course?

Safety Regulations for Work and Operation of Electrical Equipment and Installations.

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 70%.

Who is this course for?

Maritime personnel who require an introduction to or awareness of maritime Protection and Indemnity insurance.

Is previous experience required?

You do not need prior knowledge or experience to complete this course. 

How will this course benefit me?

This course aims to provide personnel with an awareness of the principles of maritime Protection and Indemnity Insurance.

How will this course benefit my company?

By ensuring you have an understanding of the maritime Protection and Indemnity Insurance. 

What standards are referred to in this course?

The Marine Insurance Act.

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 70%.

Who is the course for?

Officers and Electrical Ratings working on low voltage installations.

Is previous experience required?

No previous experience is required to complete this course.

How will the course benefit me?

This course will give learners an overview of working on electrical installations.

How will the course benefit my company?

By ensuring you have the knowledge and competence to be working on low voltage installations.

What standards are referenced in the course?

Safety Regulations for Work and Operation of Electrical Equipment and Installations.

Is there an assessment? 

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 70%.

Who is the course for?

Junior engineers, Junior Electrotechnical officers (ETO), Junior Deck Officers, Deck and Technical Ratings.

Is previous experience required?

No previous experience is required to complete this course.

How will the course benefit me?

This course will provide you with an introduction to how steering gear operates and the potential challenges with operation.

How will the course benefit my company?

This course will provide junior members of staff with an introduction on how steering gear operates.

What standards are referenced in the course?

International Convention for the Safety of Life at Sea (SOLAS)

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 70%.

Dette kurset tilfredsstiller krav i Norsok R-003 tillegg B.8 og B.9 vedlikehold og verifikasjon av kompetanse. Simulator trening bør gjennomføres minst hvert tredje år for kranoperatører G5 offshorekran, dekksoperatører kan delta for å øke risikoforståelse, holde seg oppdatert på regelverk.

Målsetningen med kurset er at kranoperatør skal tilegne seg tilstrekkelig kunnskap om sikker bruk av G5 offshorekraner til å håndtere last internt på innretning, til og fra fartøy mellom faste eller flytende innretninger og undervannsløft på en sikker måte. Risikoforståelse, riktig adferd, teknisk systemforståelse og krav i NORSOK R-003 er hovedfokus under gjennomføring.

Kursinnhold: 
- Kartlegging av kompetanse
- Kjennskap til ulykker innen kran- og løfteoperasjoner
- Lover, forskrifter, standarder og brukermanual
- NORSOK R-003 sikker bruk av løfteutstyr
- Løfteinnretningens tekniske oppbygning og virkemåte
- Løfteinnretningens sikkerhetssystemer
- Vedlikehold og sakkyndig kontroll
- Planlegging av løfteoperasjoner
- Simulatortrening: kritiske løfteoperasjoner, personalløft med MOB-båt/personalbasket og løft under marginale værforhold
- Simulatortrening: Bruk av sikkerhetssystemer, AOPS, MOPS, nødlåring og nødkjøring
- Simulatortrening: fokus på personlig faktor og reaksjonsmøter
- Evaluering etter hver øvelse i simulator
- Teoretisk eksamen

Påmelding
- Påmeldingsskjema skal fylles ut og returneres sammen med en PO eller akseptert betalingsmetode.
- PO eller akseptert betalingsmetode kan sendes til RA-NOR-AMAdminSupport@nov.com. 
- Ordrebekreftelse og Joining Instruction vil bli sendt så snart deltakeren har fått plass.

Kansellering
- Hvis kjøper kansellerer mindre enn tretti (30) dager før oppstartsdato, vil kjøper bli belastet 100% av beløpet for opplæringen.
- Selger forbeholder seg retten til å kansellere og / eller planlegge ny dato på kurs med lav påmelding opptil to (2) uker før startdato for kurset.

No show
Ved manglende oppmøte, forbeholder selger seg retten til å fakturere kjøper for "no show" 100 % av beløpet for opplæringen.

NATIONAL OILWELL VARCO, L.P. OG DETS AFFILIATER VILKÅR OG BETINGELSER gjelder for alle kurs. 

The course is in accordance with the Norwegian oil and gas training curricula - courses in valve technology.  The course is a combination of theory and practical application and concludes with a web-based exam, which takes about 2 hours to complete.

This training will help participants make their daily work with valves simpler and safer.
 
Course Content
- Operate different valve types optimally
- See the difference between the different types of valves
- See if valves are functioning properly
- Test valves
- Perform 1st line maintenance
- Ensure that valves are and remain atmospherically sealed
- Dismantle and install valves on the line

The VIRSEC Maritime English Test for Senior Deck Officers is designed to assist ship operators and employers make recruiting decisions by assessing the English language competency of Seafarers at a Senior Officer position working on board any vessel.

The Test is designed around the approved guidelines for Maritime English developed by the IMO. These guidelines are combined with internationally recognised methods for English language testing to form a rigorous and accurate testing system.

Regulations:

The English Tests are designed from the ground up using approved guidelines from the International Maritime Organisation (IMO Model English course 3.17); IMO Standard Marine Communication Phrases (SMCPs); and consistent with the framework set out by the Standards of Training, Certification and Watchkeeping.

Why Take This Test With VIRSEC:

What makes VIRSEC different from the others? Below are some of the benefits of taking this online Test with VIRSEC:

• CPD Accreditated Online Test
• Randomised Questioning
• Adheres to International Standards
• Position-Focused Questions
• Assesses 5 Primary Language Skills

Test Duration:

The user must attempt the Test in 90 minutes, and in one sitting. If a candidate does not complete the exam within the duration, they will fail any unanswered questions.

Hovedmål med kurset er å gi personer som skal utøve rollene som signalgiver, anhuker, dekksoperatør, boredekksarbeider, rigger og operatør av løfteinnretning opplæring i vurdering og forståelse av farer samt sikker bruk, vedlikehold, daglig kontroll og kasseringsregler for ulike typer løfteredskap. Anhuker og signalgiver skal samhandle og kommunisere med operatør av løfteinnretning i enhver løfteoperasjon på en slik måte at uønskede hendelser unngås.

Kursinnhold
- Innledning
- Lover, forskrifter og standarder
- Personlig verneutstyr og farlig gods
- Krav til signaldgiver og anhuker
- Planlegge, gjennomføre og evaluere
- Oppbevaring, bruk og kontroll av løfteredskaper
- Sikkerhet for personell
- Kritiske løfteoperasjoner
- Løftetabeller
- Praktisk bruk løfteredskaper
- Evaluering og avsluttende prøve

Modul 1.1 (8 timer) Arbeidsmiljø, ansvar og konsekvenser 

Modul 2.3 (16 timer) G11- Løfteredskap 

This course is only available in Norwegian.