Course catalogue

Presentation

This training course describes the classification and statutory certification processes and provides an overview of the class and statutory surveys.

Objectives

On completion of the training, students will be able to:

Understand the classification process and get familiar with classification terms, definitions and rules.

Understand the process of Statutory Certification and get familiar with Statutory Certification terms.

Know the scope of Classification and Statutory Certification

Program

Module 1 – Classification

History of classification

History of Bureau Veritas

Classification Societies and IACS

Definitions

Scope of classification: Classification tasks, responsibilities of other parties, classification certificate, request for intervention, surveyor's intervention, operation and maintenance of ships, flag and port state control inspections 

Classification notations: Class symbols, construction marks, service notations, navigation and operating area notations, additional class notations

Classification process: Assignment of class for new buildings, classification after construction, class reassignment, maintenance of class

General principles of surveys: Survey procedure, definitions, survey preparation and conditions for surveys, terminology

Survey types: Class renewal surveys, other periodical surveys, occasional surveys

Suspension and withdrawal of class

Scope of surveys: Annual surveys, intermediate survey, class renewal survey, bottom survey, tailshaft survey, boiler survey

Module 2 – Statutory Certification

History of statutory conventions

Definitions

International conventions: SOLAS, COLREG, Load Lines, MARPOL, AFS, BWM 

Recognitions and authorisations

IMO RO Code

Statutory surveys

Periodicity of statutory surveys

Survey findings

Types of statutory certificates

Issuance of statutory certificates

Certificate

On completion of the training program, the student will be awarded the following qualifications:

Certificate of Introduction to Class and Statutory Surveys awarded by Bureau Veritas Solutions Marine & Offshore.

The Certificate of Introduction to Class and Statutory Surveys, issued by Bureau Veritas Solutions Marine & Offshore, is obtained after completing the course and passing the qualification examination.

The IEMA Foundation course provides staff with a solid knowledge of the environment, sustainability, and governance principles relevant to organizations.  It covers specific management tools and skills with a practical application for the workplace to enable staff to improve performance.

Develop the knowledge and skills to help improve sustainability and environmental performance

Learn practical skills to help reduce the impacts of the organization on the environment

Upon completion of this course, learners will be able to:

• Understand business, governance, and environmental principles and their relationship with organizations, products, and services

• Ensure compliance with major environmental policy and legislation 

• Implement specific tools, techniques, systems, and practices to improve sustainability performance

• Collect data, perform analysis and evaluate information to provide sustainable solutions

• Implement change and transformation to improve sustainability

Provided in association with Astutis, approved centre 1857.

IOSH Managing Occupational Health and Wellbeing course will provide managers with the practical advice and tools to help create a healthy and productive workplace.

IOSH Managing Occupational Health and Wellbeing is targeted at line managers and offers them practical advice to manage health risks and understand their responsibilities for the health and wellbeing of staff.  It equips line managers with the basic tools and techniques to play their part in improving health and wellbeing across their organisation.

The course is split into 4 modules and covers:

• Importance of managing workplace health and wellbeing

• Health risk management

• Fitness for work and the need to manage changes in the health status of employees

• The business value of promoting a wellbeing programme

Upon completion of the Global Wind Organization (GWO) Basic Safety Training (BST), delegates will have awareness of the dangers that arise when working in the wind industry and how to control and reduce these dangers.

The course covers the requirements for training of personnel and refresher courses both onshore and offshore wind in accordance with:

- Global Wind Organization (GWO)

- Labor Inspection (Regulations)

Competence for "Working at heights" must be maintained in accordance with. guideline in the GWO standard. It shall be conducted refresher training every 2 years.

Presentation

This training course provides an overview of the Magnetic Particles Testing (MT) method for non-destructive examination of materials and welding, its objectives and principles.

Objectives

On completion of the training, students will be able to:

Understand the basic physical principles of magnetic particle testing.

Know the testing procedure and the inspection process referred to testing materials and equipment.

Differentiate applications and the acceptance criteria applied.

Get familiar with the purpose of reference materials and/or blocks to ensure the quality of test performance and testing results.

Program

Basic principle

Testing procedure

o Surface preparation

o Magnetization

o Applying detection media

o Inspection and recording

o De-magnetization

o Post-cleaning

Testing materials and equipment

o Detection media–dry and wet magnetic particles

o Equipment for magnetization

o AC/DC

Applications and acceptance criteria

o Scope

o Indications

o Acceptance criteria

o Test report

Reliability, quality of test performance

o Verification of magnetization

o Viewing conditions

o Detection media

o Magnetic flux indicators

o NDT personnel competence

Certificate

On completion of the training program, the student will be awarded:

A Certificate of NDT – Magnetic Particles Testing, issued by Bureau Veritas Solutions Marine & Offshore.

The Certificate of NDT – Magnetic Particles Testing is obtained after completion of the course and passing the online test.

Presentation

This training course provides a general overview of the requirements of the International Load Lines Convention and the conditions of assignment of load lines.

Objectives

On completion of the training, students will be able to:

Know the general requirements of the International Load Lines Convention and understand the conditions of assignment of load lines.

Know the different types of surveys; understand the scope of each survey and the certificates, records and documents associated with the Load Lines Convention.

Know the most common deficiencies and PSC detainable items in connection with the Load Lines Convention.

Program

History of Load Lines Convention

Purpose of the Convention

Definitions

Freeboard calculation

Load line marks

Conditions of assignment

o Information to be supplied to the Master

o Doors

o Cargo and other hatchways

o Machinery space openings and miscellaneous openings

o Ventilators and air pipes

o Scuppers, inlets and discharges

o Scuttles and windows

o Freeing ports

o Protection of crew

o Special conditions of assignment for Type A ships

Special requirements for ships assigned with timber freeboards

Certificates, records and other documents

Scope of Load Line surveys

o Initial survey

o Annual survey

o Renewal survey

Common PSC deficiencies related to Load Lines

o PSC statistics

o Detainable deficiencies

Certificate

On completion of the training program, the student will be awarded:

A Certificate of Load Lines, issued by Bureau Veritas Solutions Marine & Offshore.

The Certificate of Load Lines is obtained after completion of the course and passing the online test.

Presentation

This training course provides a general overview of the MARPOL requirements concerning the protection against oil pollution from cargo spaces of oil tankers.

Objectives

On completion of the training, students will be able to:

Understand the MARPOL requirements for the prevention of oil pollution from cargo spaces of oil tankers.

Get familiar with the pollution prevention equipment required by the MARPOL Convention.

Know the requirements for survey and certification of oil tankers.

Program

Segregated ballast tanks

Double hull and double bottom

Pump-room bottom protection

Subdivision and stability

Slop tanks

Pumping, piping and discharge arrangements

Oil discharge monitoring and control system

Oil/water interface detector

Crude oil washing system

Control of discharge of oil

Oil record book part II

Ship-to-ship transfer

Survey and certification, type-approval certificates

Different survey types

Certificate

On completion of the training program, the student will be awarded:

A Certificate of MARPOL Oil Pollution from Cargo Spaces, issued by Bureau Veritas Solutions Marine & Offshore.

The Certificate of MARPOL Oil Pollution from Cargo Spaces is obtained after completion of the course and passing the online test.

Presentation

This training course provides an overview of the different techniques employed for non-destructive tests (NDT) of materials and welding, their objectives and principles.

Objectives

On completion of the training, students will be able to:

Know the objectives and principles of the various non-destructive testing methods.

Differentiate NDT methods regarding application selection and physical principles.

Understand the evaluation process referred to the testing procedure.

Be familiar with the reliability of the various NDT methods.

Program

Definitions and terminology

Role of non-destructive testing

NDT methods

Systematisation of NDT methods

o Visual testing

o Penetrant testing

o Magnetic particles testing

o Radiographic testing

o Ultrasonic testing

Evaluation of NDT findings

Indications and flaws

Acceptance criteria

Reliability of NDT

Probability of detection

NDT operators certification

Certificate

On completion of the training program, the student will be awarded:

A Certificate of Introduction to NDT, issued by Bureau Veritas Solutions Marine & Offshore.

The Certificate of Introduction to NDT is obtained after completion of the course and passing the online test.

Presentation

This training course describes the various components of a shaft line and the different types of shafts and their couplings, the importance of shaft alignment and the various methods utilized for shaft alignment. The course provides also a brief introduction to the vibrations that may affect the shaft lines.

Objectives

On completion of the training, students will be able to:

Get familiar and understand the components of a shaft line, know the types of shafts and their couplings, understand the protection required and the shaft line components scantlings and get familiar with the required tests and certification of shaft lines.

Understand the importance of shaft alignment and the factors influencing the alignment, know the different alignment methods currently employed and understand the shaft alignment issues for installations other than the main shafting line.

Understand the different types of vibrations that may affect shaft systems, know the general principles of torsional and axial vibrations and get familiar with the vibration control methods and vibration tests and measurements

Program

Module 1 - Shaft Lines and Propeller

Shaft line components: Shafts, shaft liners, propellers, propeller cap, shaft and intermediate bearings, stern tube, stern tube bushes and seals

Couplings: Flanged couplings, hydraulic couplings, flexible couplings

Design and construction: Propeller shaft key and keyway, shaft materials, couplings materials, coupling bolts, shaft scantlings, shaft monitoring

Inspection and certification: Inspections during construction, material tests, hydrostatic tests, certification, sea trials

Module 2 – Shaft Alignment

Introduction

Alignment calculation

Required information

Factors influencing the alignment: Draught, buoyancy, rigidity of the bearing base, temperature

Alignment methods: Gap and sag method, sighting method, jack-up method, strain gauge method

Alignment verification on board

Shafts for other installations: Alignment techniques, preparation, types of misalignment, alignment methods

Module 3 – Shaft Vibrations

Torsional vibrations

Rules requirements

Vibration damper

Barred speed range

Required documentation

Calculation principles

Axial vibrations

Vibration control and tests

Certificate

On completion of the training program, the student will be awarded:

A Certificate of Shaft Alignment, issued by Bureau Veritas Solutions Marine & Offshore.

The Certificate of Shaft Alignment is obtained after completing the course and passing the online test.

It is important that a ship can demonstrate compliance with the ISPS Code through the provision of an International Ship Security Certificate (ISSC), or in circumstances where there is an obvious security failing; otherwise, difficulties may be experienced at ports of call-in relation to the Port State Control Authorities. For this reason, this course is intended to align UK flagged cargo ships with the UK Department for Transport Maritime Security (formerly TRANSEC) with UK flagged passenger ships and port facilities, and to help in the generation of practical and sustainable regimes that balance the security of the ship with the wellbeing of the crew.

The course conforms to CSSI guidelines provided by the UK Department for Transport Maritime & Coastguard Agency (MCA), which specifies the baseline protective security measures to be taken by ships at all ports around the world and at each of the Security Levels, and aims to ensure consistent, proportionate, and practical measures are in place.

The UK Department for Transport (formerly TRANSEC) and The Maritime and Coastguard Agency (MCA) have responsibility to ensure the safety of port facility and cargo/freight & passenger ship security, within a policy framework demanded by international maritime legislation and codes outlined in SOLAS Chapter X1-2 and the International Ship and Port Facility Security (ISPS) Code.

This applies to the following types of ships engaged on international voyages:

• Passenger ships, including high-speed craft.

• Cargo ships, including high-speed craft, of 500 gross tonnage and upwards.

• Mobile offshore drilling units as defined in Regulation XI-2/1.1.5. (SOLAS)

The course can be used as an intrinsic part of an organisation's overall risk management and has been created to advise and educate senior personnel, senior officers, and specific security personnel in the application of security measures contained in UK Flagged Cargo Ship Security Plans (SSPs) at the different Security Levels.

Presentation

This training course provides general information on the ship’s propulsion system and its main components, the Rules’ requirements for design and survey of propeller and shaft installations, the requirements and methodology for the assessment on board of shaft alignment, and an overview of tailshaft survey requirements.

Objectives

On completion of the training, students will be able to:

Know the main propulsion shaft components

Understand the design requirements for propellers and propeller shafts 

Get familiar with the arrangements and installation on board of propellers and propeller shafts

Understand the main requirements for shaft alignment

Understand the survey requirements for propeller shafts and other propulsion systems.

Program

Main components of propulsion shafting

Design and construction of propulsion shafting

o Rules requirements

o Shaft alignment software

o Documentation to be submitted

o Materials

o Couplings

o Scantlings

o Lubrication system

Arrangement and installation – Shaft alignment

o Alignment calculation

o Shaft alignment sighting

o GAP and SAG method

o Bearing loads

o Alignment checking after chocking

Material tests, workshop inspections and testing, certification

Propellers

o Classification requirements

o Propeller types

o Geometry of propeller

o Materials

o CPP control system

o Arrangement and installation

o Testing and certification

Tailshaft surveys

o Survey schemes

o Periodicity

o Scope of surveys for traditional propeller shafts

o Scope of surveys for other propulsion systems

Certificate

On completion of the training program, the student will be awarded:

A Certificate of Propeller and Shaft Installations, issued by Bureau Veritas Solutions Marine & Offshore.

The Certificate of Propeller and Shaft Installations is obtained after completion of the course and passing the online test.

Research shows that 1 in 4 people will suffer from a mental health condition at some point in their lives, and 1 in 6 will experience mental health problems in the workplace. In fact, work pressures are commonly cited as being the number one contributor to stress. Mental health problems are often covered up through fear of discrimination, and a culture of fear and silence can make things very much worse - and be extremely costly for employers. Awareness of First Aid for Mental Health: Level 1 is a 100% online training course designed to raise awareness of mental health issues and help the learner to spot symptoms in themselves or others.

Awareness of First Aid for Mental Health: Level 2 is a 100% online training course designed to raise awareness of mental health issues, help the learner to spot symptoms in themselves or others, and outline what steps are to be taken to help those in need and to improve the working environment. This level 2 qualification is targeted to supervisors or team leaders in an organisation who have responsibilities and duty of care over the general health and wellbeing of colleagues. The course outlines how to spot the signs and symptoms of mental ill health, how to provide help on a first aid basis, and when to escalate the level of care or even seek professional help. It also covers how to identify drug or alcohol abuse and what to do about it, and how to improve the working environment so that it is a place of inclusion and openness, rather than a source of fear and stress.

Statistics from the British Crime Survey show that the number of individuals classed as lone workers has been steadily growing, and that as many as 150 lone workers are attacked every single day in the UK. Employees working alone may be left in a situation where they are unable to alert someone for help in the case of an accident, confrontation, or sudden illness - so it’s important that these specific risks are identified early, and effectively controlled.

The course covers the main hazards, applicable legislation, risk assessment, risk reduction measures and key responsibilities of the individual.

Presentation

This training course composed of 4 modules provides an overview of the Polar Code. It includes a general presentation of the Polar Code, the certification process, the safety requirements and the environmental protection requirements.

Objectives

On completion of the training, students will be able to:

Understand the main sources of hazards associated with the operations in polar waters and be familiar with the general principles, structure and philosophy of the Polar Code.

Know the main steps of the certification process, the operational assessment methodologies used to establish the operational limitations in ice operations, the requirements and contents of the Polar Water Operational Manual, and the survey and certification requirements.

Have a general understanding of the safety requirements concerning ship’s design and construction, machinery installations, safety equipment and fire protection, safety of navigation and communication equipment.

Get familiar with the requirements for operations in polar waters and training of crew.

Understand the Polar Code requirements for protection against oil pollution, NLS pollution, sewage pollution and garbage disposal.

Program

Module 1 – The Code

Introduction

Regulatory framework

The Polar Code

Module 2 – Certification Process

Certification overview

Operational assessment

Polar Water Operational Manual

Surveys and Certification

Polaris

BV Rules 

Module 3 – Safety Requirements

What does the Polar Code mean for safety?

Design and Construction

Equipment

Fire protection

Life-saving appliances

Operations and manning 

Module 4 – Environmental protection

How the Polar Code protects the environment?

Pollution prevention

Certificate

On completion of the training program, the student will be awarded: 

A Certificate of Polar Code, issued by Bureau Veritas Solutions Marine & Offshore.

The Certificate of Polar Code is obtained after completion of the course and passing the online test.

Hensikt: Grunnleggende overlevelsestrening for offshore vindindustri. 

Ved gjennomføring av Global Wind Organization (GWO) Basic Safety Training (BST) vil delegatene ha en bevissthet om farene som oppstår når de arbeider i vind-industrien og hvordan man kontrollerer og reduserer disse farene.

Kursdeltakerne vil få (repetert) kunnskap og ferdigheter til å anerkjenne fordeler og begrensninger knyttet til livreddende utstyr og PVU samt korrekt bruk av dette i forbindelse med offshore vind. 

Hensikten med kurset er å gi deltakerne kunnskaper/oppfriskning om livreddende utstyr, GMDSS og SAR utstyr, hvordan en kollektivt kan øke sjansen til overlevelse i en nødsituasjon, hvordan entre og forlate vindturbiner, samt evakuering i nødsituasjoner. 

Kurset dekker krav til opplæring av personell og repetisjonskurs både land- og havvind iht:

- Global Wind Organization (GWO)

- Arbeidstilsynet (Forskrifter)


Kompetanse for «Sea Survival» skal vedlikeholdes iht. retningslinje i GWO standarden. Det skal gjennomføres repetisjonskurs hvert 2. år.

This course is only available in Norwegian.

Provided in association with Astutis, NEBOSH Learning Partner 807.

The NEBOSH National Diploma in Occupational Health and Safety is an advanced health and safety qualification. Equivalent to an undergraduate degree in OHS. The NEBOSH Diploma is NEBOSH's flagship qualification. It is recognized by employers and professional bodies in over 180 countries around the world!

The qualification will develop competence in all areas of health and safety so you can reduce risk in dangerous environments and keep people safe. It is the ideal course if you want a successful, long-term career in health and safety.

Unit A: Managing Health and Safety

This unit provides an in-depth understanding of the key areas for managing health and safety, covering moral, economic, and societal drivers, health & safety law, and health & safety management systems. 

A1 - Principles of health & safety management

A2 - Principles of health & safety law

A3 - Criminal Law

A4 - Civil Law

A5 - Loss causation and incident investigation

A6 - Measuring and reviewing health and safety           

A7 - Identifying hazards, assessing and evaluating risk

A8 - Risk control

A9 - Organisational factors

A10 - Human factors

A11 - The role of health & safety practitioner

Unit B: Hazardous Agents in the Workplace

Unit B details all major aspects of managing chemical, biological, physical and physiological hazards in the workplace.

B1 - Managing Occupational Health

B2 - Identification, assessment & evaluation of hazardous substances

B3 - Control of hazardous substances

B4 - Monitoring and measuring

B5 - Biological agents

B6 - Physical agents - noise and vibration

B7 - Physical agents - radiation

B8 - Mental ill-health & dealing with violence & aggression at work

B9 - Musculoskeletal risks and controls

B10 - Work environment risks and controls

Unit C: Workplace and Work Equipment Safety

Unit C provides a thorough understanding of how to create and manage safe working environments, covering welfare, fire, dangerous substances, work equipment, electricity, construction, and transport. 

C1 - Workplace welfare requirements and specific workplace issues

C2 - Fire and explosion

C3 - Workplace fire risk assessment

C4 - Storage, handling, and processing of dangerous substances

C5 - Work equipment (general)

C6 - Work equipment (workplace machinery)

C7 - Mobile, lifting, access, and work at height equipment

C8 - Electrical safety 

C9 - Construction & works of a temporary nature - hazards and controls

C10 - Workplace transport and driving for work

Presentation

This training course provides an overview of the Penetrant Testing (PT) method for non-destructive examination of materials and welding, its objectives and principles.

Objectives

On completion of the training, students will be able to:

Understand the basic physical principles of liquid penetrant testing.

Know the testing procedure and the inspection process referred to testing materials and equipment.

Differentiate applications and the acceptance criteria applied.

Get familiar with the purposes of reference materials and/or blocks to ensure the quality of test performance and testing results.Program

Basic principle, capillary effect

Physical properties of the penetrant

Testing procedure

o Pre-cleaning

o Penetrant application

o Excess penetrant removal

o Developer application

o Inspection and recording

o Post-cleaning

Testing materials and equipment

o Penetrants

o Removal methods

o Developers

o Equipment

Applications and acceptance criteria

o Indications

o Test report

Reliability, quality of test performance

o Surface preparation and condition

o Types of penetrant materials and equipment used

o Penetrations and development time

o Viewing conditions

o The temperature of the test surface

o The material tested and flaws expected

o NDT personnel competence

o Safety issues

Certificate

On completion of the training program, the student will be awarded:

A Certificate of NDT – Penetrant Testing, issued by Bureau Veritas Solutions Marine & Offshore.

The Certificate of NDT – Penetrant Testing is obtained after completion of the course and passing the online test.

Presentation

This training course provides an overview of the Ultrasonic Testing (UT) method for non-destructive examination of materials and welding, its objectives and principles.

Objectives

On completion of the training, students will be able to:

Understand the basic physical principles of ultrasonic testing.

Know the testing procedure and the inspection process referred to the equipment used.

Differentiate applications and the acceptance criteria applied.

Get familiar with the purpose of calibration and reference blocks to ensure the quality of test performance and test results.

Program

Basic principle

o Ultrasonic waves and propagation

o Ultrasonic pulse-echo principle

Equipment and testing materials

o Ultrasonic testing instruments

o Ultrasonic testing probes

o Coupling media

o Calibration and reference blocks

Testing procedure

o Surface preparation

o Scanning – ultrasonic testing techniques

o Testing parameters

o Examination

o Data presentation

Applications and acceptance criteria

o Scope

o Indication evaluation

o Acceptance criteria

o Test report

Reliability, quality of test results

o UT system performance

o NDT personnel competence

Certificate

On completion of the training program, the student will be awarded:

A Certificate of NDT – Ultrasonic Testing, issued by Bureau Veritas Solutions Marine & Offshore.

The Certificate of NDT – Ultrasonic Testing is obtained after completion of the course and passing the online test.

Presentation

This training course provides a general introduction to welding, including an introduction to metallurgy, general information concerning welding, an overview of the electric arc processes commonly used in shipbuilding and details of welding inspection.

Objectives

On completion of the training, students will be able to:

Understand the nature and know the mechanical properties of metals; Understand the production process of steel and aluminium and the application of casting and forging processes.

Understand fundaments of fusion welding; Know how to determine heat input and preheat temperature; Understand the influence of the thermal cycle on weld microstructure and distortion; Know the general types of welding joints and the different welding positions

Know how to differ and recognize the arc welding processes used in shipbuilding; Understand the applicability and limitations of the different welding processes; Get familiar with common types of arc welding equipment and power sources

Know and apply the required activities in welding inspection; Determine and arrange the scope of inspection plan for different tasks; Know the different types of weld imperfections; Understand how to perform visual inspection of welding

Program

Module 1 – Introduction to Metallurgy

Module 2 – Welding Fundamentals

Module 3 – Arc Welding Processes

Module 4 - Welding Inspection

Certificate

On completion of the training program, the student will be awarded:

A Certificate of Welding Fundamentals, issued by Bureau Veritas Solutions Marine & Offshore.

The Certificate of Welding Fundamentals is obtained after completing the course and passing the online test.

Strict regulations and procedures exist for the safe and efficient operation of ships and yachts - and UK regulations and procedures may differ from those you may be familiar with in other flag vessels. This guide mainly deals with issues specific to yachts, such as operations and manning standards, and what to do about them.

This online course will help you to comply with UK requirements by focusing on the guidelines set out in 'A Master's Guide to the UK Flag (Large Yacht Edition 3)', released by the UK DfT Maritime and Coastguard Agency.  

This course aims to allow the learner to train themselves in vital regulation and procedures in the most efficient way possible - by studying each of the 14 subjects in this course, with learning consolidated via confirmation and assessment questions.