Course catalogue

Objective: The aim of the training is that theoretical and practical knowledge about fall protection and the correct use of rescue equipment, rescue of free-hanging persons, rescue of personnel over open sea, tank, stretcher transport, descent and treatment of personnel after fall accident is refreshed and repeated.

The training is adapted for personnel who are part of fall protection / rescue teams on board an installation. Participants must gain expertise in risk assessment, rescue (equipment and methods) and first aid.

Covers repetition requirements every 2nd year in accordance with NOG 113 and SFS.

Content:

Introduction
Regulations
Review of accidents and incidents
The rescue service
Equipment
Routines when working at height
Risk assessment
Management, site of injury
Stress and stress management
Hanging trauma, CPR
Rescue drills
Evaluation

Hensikt:

Målsetting med opplæring er at den som gis opplæring tilegner seg tilstrekkelig kunnskap om metoder for å lede og veilede løfteoperasjoner slik at de blir forskriftmessig utført.

Opplæringen gir også kunnskap om farer forbundet med løfteoperasjoner samt bruk av risikokartlegging.

Kurset gir deltakere kunnskap til å kunne utøve overordnet operasjonell ledelse av løfteoperasjoner. Med det menes å kunne planlegge, risikokartlegge og evaluere, samt forebygge ulykker. Videre vil deltaker også tilegne seg kunnskaper om å gjøre rede for materialhåndteringsplan, oppbevaring og bruk av utstyr.

Målsetting med opplæring er at den som gis opplæring tilegner seg tilstrekkelig kunnskap om metoder for å lede og veilede løfteoperasjoner slik at de blir forskriftmessig utført.

Innhold:

• Krav og ansvar til rollen operasjonelt ansvarlig

• Lover, forskrifter, standarder og retningslinjer som gjelder vedr. bruk av løfteutstyr

• Overordnet operasjonell ledelse av løfteoperasjoner

• Helhetlig planlegging av løfteoperasjoner

• Risikokartlegging

• Identifisering av og etablering av barrierer. Gjennomføring og evaluering av en løfteoperasjon

• Informasjonsutveksling

• Krav for oppbevaring av løst løfteutstyr

• Krav for ulike typer løfteutstyr

• Krav til fadder, praksis og sensor

• Avsluttende prøve

This course is made for personell envolved in design, planning, projecting, installation and maintenance on electrical installations and equipment offshore. 

The purpose of the standard is to minimize the hazards to people and equipment, whilst optimizing dependability.

Objective: The purpose of the standard is to minimize the hazards to people and equipment, whilst optimizing dependability.

Content:

- An easy to understand overview and explanation of the committees/regulations/standards and how they are intertwined. 

- Presentation of the regulations and norms: PTIL 5 HMS, Nek 410 (IEC 60092), Nek 420 (IEC 60079), ATEX directives including standards and the Norsok series. 

- The structure and history of the IEC 61892 series, and the scope and application. 

- By using a fictive, illustrated installation, we will focus on the practical elements covered in the following standards: 

o IEC 61892-1 - General requirements and conditions 

o IEC 61892-2 - System Design 

o IEC 61892-3 – Equipment 

o IEC 61892-4 – Cables 

o IEC 61892-6 – Installation 

o IEC 61892-7 – Hazardous areas

This course is only available in Norwegian.

EXAM OBJECTIVES

This exam tests the skills and competence of a DPO against the requirements given in the competence standard DNV-GL Notation AJ/FT-AT.

The exam is a thorough test, covering the most important competences for a DPO, in compliance with relevant DNVGL competence standards. The test measures how well operation of equipment, duties and tasks are performed, all in compliance with relevant international, national and local regulations and requirements.

EXAM AND CERTIFICATION PROCESS

The test center will upon receipt of the application formsend a notification containing the following:

• Exam date and time
• Exam place and Terms & conditions
• Recertification requirements
• DNV GL standard for certification ST-0023
• Standard for certification 0032, Appendix A: Examination regulations
• Time schedule for examination

SPECIAL INFORMATION

• DNV GL Standard for certification ST-0032 - Test centre for certification of personnel
• DNV GL standard for certification ST-0033 - Maritime simulator systems
• DNV GL standard for certification ST-0023 - Competence of Dynamic Positioning Operators

CERTIFICATE

A DNV GL DPO certificate will be issued upon successful completion of the exam.

LEARNING OBJECTIVES

The course aim to give knowledge, understanding and practical skills within:
• Operations
• Forces
• Communication
• Planning

CONTENT

• Safety functions
• Start / stop procedures
• Operational limitations of crane operations
• Communication during crane operations
• Preparation and planning of crane operations
• Internal transport on the installation
• Loading and unloading supply vessels
• Crane operation on various fixed and floating installations

LEARNING PROCESS

The purpose of this course is to give operators and others involved in lifting operations the basic knowledge, understanding and skills.

This is achieved through an in-depth period of training on a full-scale DNV GL Class A crane simulator, supported by a program of lectures and instruction.

Study will cover dierent types of loads and external forces affecting the load on crane and boat.

SPECIAL INFORMATION

References: NORSOK R003

The course can be adjusted to suit company specific needs regarding the choice of unloading/loading procedures.

CERTIFICATE

Certification of attendance will be issued upon successful completion of the course.

LEARNING OBJECTIVES

The Offshore loading courses are designed to meet  Equinor, OGUK and company specific requirements for training of shuttle tanker personnel. The objective is to achieve optimal skills and understanding on how to handle a shuttle tanker in DP mode. The participants will use previously acquired knowledge on manual handling and basic DP together with updated advanced DP knowledge during training on Shuttle tanker operational procedures.

The course focuses on handling Shuttle Tankers in close proximity to Floating Production Storage and Off take units (FPSO’s/FSU’s), Offshore Loading systems (OLS), Single Anchor Loading (SAL) and Direct Shuttle Loading (DSL) from various FPSO’s.

CONTENT

Discussions on unwanted incidents
• Contingency situation scenarios
• Gain thorough understanding of:
- The DP system’s possibilities and limitations
- Offshore Loading procedures for various fields
- Correct use of Position Reference systems
- Requirements and guidelines that applies for
- Shuttle Tanker DPO’s

LEARNING PROCESS

All approaches to the loading buoys are carried out by using Dynamic Positioning Systems, according to procedures. Simulations also include reconstruction of known DP incidents involving shuttle tankers. The complexity of these exercises will be based on the experience of the person “in charge” on the bridge.

SPECIAL INFORMATION

References:
• Equinor Competence Requirements for Shuttle Tanker Personnel, WR 239
• OGUK Tandem Loading Guidelines Volume 1
• Teekay Competence Requirements, SP 0961
• Various operational procedures

CERTIFICATE

Certification of attendance will be issued on successful completion of the course.

LEARNING OBJECTIVES

This course aim to provide Navigators on Shuttle Tankers knowledge and skills to be a certified DPO in offshore Loading Operations.

By the end of the course the students should have:

• Acquired a thorough knowledge of the various type of Offloading Operations, i.e. OLS (Offshore Loading System), SAL (Single Anchor Loading), Tandem loading from FPSO’s and FSU’s and DSL (Direct Shuttle Loading)
• The capability to operate the DP System in various
• modes associated with offshore loading operations; i.e. Joystick, Auto Pos, Approach, Weather Wane
• The ability to carry out any Offshore Loading Operation according to field procedures, guidelines and to best practice.
• The ability to react correctly to any unforeseen DP incident in order to avoid a disaster

CONTENT

• Simulator exercises
• Briefing and de-briefing of a variety of relevant exercises according to the actual field procedures
• Shuttle Tanker competence and training requirements
• Basic Human Factors

LEARNING PROCESS

All Offshore Loading exercises will be carried out on a Full Scale Visual DNV GL Approved DP Class A simulator, being able to simulate all types of operation listed as learning objectives.

SPECIAL INFORMATION

References:
• DNV GL, Standard for Certification no. 0023
• DNV GL, Standard for Certification no. 0008
• DNV GL, RP-0007

CERTIFICATE

Certification of attendance will be issued upon successful completion of the course.

Objective: Through a combination of theory and practical training, this course provides participants with the necessary knowledge and skills required to work safely in enclosed spaces.

The Norwegian Labor Inspection Authority has made major changes to the regulations. People who work in tanks and closed rooms are the biggest difference that the regulation "Work in tanks" has fallen away. This is replaced by section 29 of the regulations «execution of work», which states that all work in closed rooms shall be performed «without danger to life or health». A simple requirement that gives the employer a great deal of responsibility.

New SOLAS requirements: Exercises in closed rooms and rescue, as well as portable gas measuring equipment.

Applies to: All ships covered by SOLAS and all high-speed vessels, mobile offshore drilling units and dynamically positioned vessels

Our courses are in accordance with SOLAS-IMO requirements and the Norwegian Labor Inspection Authority - Execution of work

The definitions of a cramped space vary from country to country, but the usual criteria usually include:

- A room that is predominantly or completely closed
- Contains health and / or safety hazards
- Is not designed for continuous stay of employees
- Has entrances or exits that are small or difficult to access
- A room that is large enough that you can enter it completely and perform the work tasks you have been assigned
- Limited air circulation

Content:

- Review of public laws and regulations
- Know which constituents a safe breathing air contains
- How to make a gas measurement before entering
- Plan entry jobs and rescue operations in closed rooms
- Equipment knowledge
- Exercises in our training tank. We practice entry and use of fall protection equipment, rescue equipment, breathing air equipment and gas meter

Only in Norwegian

Kurset dokumenterer at skipsoffiserer (dekk og maskin) har gjennomført godkjent oppdateringskurs (IMO80) minst hvert femte år.

Deltakerne skal etter endt kurs kunne

- Ta kommandoen over en redningsfarkost eller mann-overbord-båt under og etter utsetting (Tabell VI/2-1) 
- Lede brannslokningsoperasjoner om bord på skip (Tabell VI/3) 
- Gi førstehjelp omgående i tilfelle av ulykke eller sykdom om bord (Tabell VI/4-1) 
- Gi medisinsk behandling av syke og skadde mens de er om bord. Delta i samordnede opplegg for medisinsk bistand til skip (Tabell VI/4-2)

Kursinnhold
- Medisinsk førstehjelp for maskinoffiserer
- Medisinsk behandling for dekksoffiserer
- Ledelse av brannslokking
- Bruk av redningsfarkoster

Praktiske øvelser

- Dag 1: Medisinsk behandling for dekksoffiserer

- Dag 1: Medisinsk førstehjelp for maskinoffiserer
- Dag 2: Brannledelsesteori, brannøvelser og røykdykking med pressluftapparater
- Dag 3: Redningsteori og mønstring og redningsøvelser med redningsfarkoster

Objective: The main goal is to provide personnel who are to perform the roles of signal transmitter, signalers and deck operator with sufficient knowledge of handling and transport of dangerous goods and hazardous waste, to be able to identify hazards and risks when handling this type of cargo, in such a way that unwanted incidents are avoided.

Safe handling and transport of dangerous goods and hazardous waste requires knowledge of hazards and risks, regulations, correct execution and safe practice during treatment and transport.

Content:

The learning process leading up to a certificate of competence is carried out to contribute to safe lifting operations, as well as to document the necessary knowledge and skills in accordance with requirements laid down in national regulations and standards.

After completion, participants must be able to identify hazards, risks, causes and consequences of accidents with dangerous goods and hazardous waste.

Participants will also be familiar with restrictions, requirements, classifications, identification, packaging, marking, documentation and handling of dangerous goods and waste.

LEARNING OBJECTIVES

The objective of this course is to give the trainee DPOs as much hands-on experience as possible in the time available. This is achieved by running the candidates through intensive simulator training whilst being exposed to environmental and technical worst case scenarios. This will increase the candidate’s operational skills and knowledge in DP Operations.

CONTENT

• All the exercises are carried out on a full scale ship simulator
• DP operations planning and watch keeping procedures
• Handling of position reference systems
• Handling of various propulsion systems
• Repetition of various theoretical topics from the DPO
• Preparation and DPO Start courses upon request from course participants

LEARNING PROCESS

This course is designed to give the trainee DPO extensive hands-on training in the use of the DP in a number of varied worst case scenarios. Candidates for the DPO Experience volume training course must have completed the DPO Preparation and the DPO Start courses, or be able to document equivalent competence.

LEARNING PROCESS

This course is designed to give the trainee DPO extensive hands-on training in the use of the DP in a number of varied worst case scenarios. Candidates for the DPO Experience volume training course must have completed the DPO Preparation and the DPO Start courses, or be able to document equivalent competence.

CERTIFICATE

Certification of attendance will be issued upon successful completion of the course.

LEARNING OBJECTIVES

This  course aim to provide knowledge, understanding and skills to conduct a safe and professional ship to ship (STS) transfer operations of crude oil, petroleum products, chemicals and liquefied gases, both at sea and in port.

CONTENT

• Introduction to STS
• Operation personnel
• STS Operation Procedure and Check Lists
• Interaction
• Communication
• Fenders
• Mooring
• External Forces
• Anchoring
• STS incidents

LEARNING PROCESS

The  course consists of totally nine theoretical lessons and nine selected simulator exercises. Participant  learning progress assessed by concurrent evaluation during both theory sessions and simulator exercises.

REFERENCES

OCIMF - Ship to ship transfer guide

CERTIFICATE

Certification of attendance will be issued upon successful completion of the course.

Basic first aid for the wind industry.

Upon completion of the Global Wind Organization (GWO) Basic Safety Training (BST), delegates will have awareness of the dangers that arise when working in the wind industry and how to control and reduce these dangers.

The course covers the requirements for training of personnel and refresher courses both onshore and offshore wind in accordance with:

- Global Wind Organization (GWO)

 - Labor Inspection (Regulations)

Competence for "First Aid" must be maintained in accordance with. guideline in the GWO standard. It shall be conducted refresher training every 2 years.

Norwegian only

LEARNING OBJECTIVES

After the course, the successful participants are able to:

• Carry out operational planning, risk assessment and hazard identification tasks
• Set up the DP system for a particular task
• Operate the communications
• Analyse the trends
• Discuss systems failures
• Decide on courses of action because of systems failures
• React to alarms and printer readout
• Initiate DP Alert status alarms
• React to all events occurring
• Operate the desk under normal and pressured conditions
• Practice effective teamwork
• Apply the lessons learned to date
• ASOGs

CONTENT

• Study of DP incidents
• Construction and use of work site diagrams, charts and vessel templates for use in DP operations
• Preparation of plans for a projected DP operation, contingency plans for expected deviations and emergencies
• Participation in simulated situations in a variety of DP operations while handling routine and emergency situations
• Risk and safety analysis, and defining DP equipment classes
• The DP system’s utilization of position measurements, and tests on position reference systems

LEARNING PROCESS

The training will be a combination of theoretical lessons and practical exercises. The participants will work with practical scenarios based on real operations, training on planning and executing specified operations under varying simulated conditions, including emergency handling

SPECIAL INFORMATION

The DP Simulator course is phase C of the Nautical Institute (NI) DP Operator Certification Scheme.

The course will be entered into the NI Dynamic  Positioning Operator’s Log Book.

CERTIFICATE

A certificate acceditated by the Nautical Institute will be issued on succcessful completion of the course.

Objective: The purpose of the course is to provide forklift drivers with a good theoretical basic training in the safe use of forklifts, so that accidents in connection with forklift driving are avoided.

Module 1.1 - Basic theoretical module
Module 2.2 -Forklift theory
Module 3.2 - Basic practice forklift.

The course is primarily aimed at future users of forklifts. But anyone who is involved with cargo handling and forklifts in risk analysis and work management can also benefit from the course.

The course is conducted with Norwegian-language teachers and teaching materials in accordance with legislation and regulations, as well as recognized curricula for module-based training.

The forklift driver training consists of four modules:

- Module 1.1 working environment, responsibilities and consequences. *
- Module 2.2 G4 bridge and overhead crane
- Module 3.2 Basic practical training forklift 
- Module 4.2 Practical driving training forklift
- Practical Final test in each forklift type T1-T4

* Module 1.1 is common to machine, forklift and crane. If you can document that you have module 1.1 from before that is not older than 3 years, let us know.

Module 4.2 can be completed in a company using a sponsorship arrangement. If you do not have the opportunity to do so, you can participate in one of STQ's practice courses.

Content:

- Safety training, laws, regulations
- Forklift types
- Electric forklift - construction
- Stability
- Daily inspection and maintenance
- Material and goods handling
- HMS
- Proper use of the forklift
- The theory course ends with a theoretical exam

Dette kurset vil gi fremtidige kranførere en god teoretisk grunnopplæring i sikker bruk av offshorekran. Opplæringen gir kandidatene god innsikt i prinsippene for offshorekraners konstruksjon, virkemåte, vedlikehold og bruk slik at uhell og ulykker i forbindelse med løfteoperasjoner unngås. Opplæringen dekker den teoretiske sikkerhetsopplæringen som kreves for G5 offshorekran, samt G20 fastmontert hydraulisk kran. Kurset avsluttes med en skriftlig teoretisk prøve. Når opplært person har bestått teoretisk prøve, samt eksamen for anhukere med tillegg av praktisk kjøreprøve på offshorekran, vil dette være grunnlag for utstedelse av kompetansebevis for fører av G5 offshorekran.

Kursinnhold:

- Innledning med definisjon på offshorekran

- Bruksområder for offshorekraner, fastmonterte hydrauliske kraner

- Ulykker med offshorekraner

- Lover og forskrifter vedr. offshorekraner 

- Krav til kranfører

- Oppbygging, konstruksjon og montering av forskjellige typer offshorekraner

- Fundament / pidestall

- Bomkonstruksjoner

- Elektrisk anlegg

- Hydraulikk / elektronikk

- Mekanikk

- Lastdiagram

- Sikkerhets- / overlastutstyr

- Vinsj / Ståltau / blokk 

- Kontroll og vedlikehold

- Sertifisering / dokumentasjon

- Sikker bruk av offshorekraner

- Øvingsoppgaver og eksamen

This course is only available in Norwegian.

Only in Norwegian

Etter gjennomført opplæring skal deltagerne ha kunnskaper og ferdigheter i å reagere og handle ved alarm, samt følge nødprosedyrer. Sikre effektiv evakuering av fartøyet og ivareta passasjerer og mannskap i en evakueringssituasjon.

Kursinnhold er i henhold til STCW-95, tabell A-V/2 og A-V/3.

Kursinnhold
- Organisere nødprosedyrer om bord 
- Skipets konstruksjon med muligheter og begrensninger 
- Beredskapsplaner og nødprosedyrer 
- Optimalisere bruk av ressurser 
- Ressursutnyttelse / øvelsemønstre 
- Styre tiltakene i en nødsituasjon 
- Organisasjon 
- Ledelse 
- Kommunikasjon 
- Håndtering av passasjerer og annet personell i nødsituasjoner 
- Bevissthet om allmenne reaksjonsmønstre 
- Etablere og opprettholde effektiv kommunikasjon 
- Betydningen av å etablere og opprettholde effektiv kommunikasjon 
- Praktiske øvelser 
- Gruppeoppgaver 
- Veiledning og instruksjon under vanskelige forhold

Objective: The training is intended to provide personnel with good theoretical and practical basic training in the use and maintenance of steel ropes.

The course provides a thorough introduction to knowledge about steel ropes, the correct use / choice of steel ropes and what requirements are set for those who use and control steel ropes.

Regulations on the performance of work, use of work equipment and associated technical requirements (regulations on the performance of work) §10-1. Requirement for documented safety training for work equipment that requires special care during use 

When an employer after a risk assessment finds that the work equipment requires special care during use, only employees who have documented safety training according to §10-2 §10-2 can be used. Requirements for documented safety training when using work equipment

Anyone who is to use work equipment as mentioned in §10-1 and §10-3, must have practical and theoretical training that provides knowledge of construction, operation, use properties and area of use, as well as maintenance and control.

Content:

- Basic theory of steel ropes
- Construction
- Properties
- End parties
- Cast blocks / Wire discs
- The right choice of wire rope
- Proper use of wire ropes
- Proper winding and running in of steel ropes
- Maintenance of steel ropes
- Lubrication of steel ropes
- Damage to steel ropes
- Disposal rules
- Checking of wire ropes in accordance with standard ISO-4309
- Exam

This is a course for electrical installations in potentially explosive areas.

Our goal is to make sure that employees are motivated to work safely and securely.   

Topics:

• General principles for explosion protection

• Area classification and zone division

• Gas groups and the connection between area and equipment

• Temperature classes and the connection between area and equipment

• The general principles for type of protection and labeling

Standards:

• NEK 420

• IEC / NEK EN 60079-10-1

• IEC / NEK EN 60079-14

This course is only available in Norwegian.

LEARNING OBJECTIVES

After the successful completion of the course, the participant should be able to:
• Explain the basic functionality of the K-Bridge system
• Operate the K-Bridge integrated navigation system
• Use the system in a safe and efficient mode
• Understand the K-Bridge system overview
• Operate  the system with all available functions in order to navigate safely under all conditions
• Explain the system’s menu structure
• Explain and utilize the system’s display setup
• Set safety values
• Recognize  alarms and malfunction indicators and actions to be taken
• Planning, validating and monitoring routes
• Change over to back up systems
• Install and update charts and licenses

CONTENT

• K-Bridge integrated navigation system
• Main system components and functionality
• Basic operation of K-RADAR, K-ECDIS, K-Conning and K-Autopilot
• Type-specific familiarization training on the K-Bridge ECDIS
• Navigation tools and functions
• Setting of safety parameters
• Sensor input and alarm handling
• Route planning, validation and monitoring
• Charts management
• Charts installation and updates 

LEARNING PROCESS

The training will be a combination of theoretical lessons  and practical exercises. The participants will be trained to find information by using the system and obtaincompetence of various applications.

SPECIAL INFORMATION

This course can be held onboard upon request.

CERTIFICATE

The course yields one diploma stating: K-Bridge Operator Course including ECDIS Familiarization.