Maritime

Course catalogue

Category
Reset

Topic
Engineering & Technology
Safe Systems of Work

Course type

Reset

E-learning course

Course provider

Reset

Mintra Trainingportal

hits

9

Introduction to Oily Water Separators (Maritime) Course code: MGM-075 Course type: E-learning course Duration: 30 minutes Language: English Price: NOK 500,- Who is the course for? Marine Engineers and Engineer ratings. Is previous experience required? No previous experience is required to complete this course. How will the course benefit me? By providing you with an understanding of why oily water separators are used in the Maritime Industry and guidance on their safe use. How will the course benefit my company? By ensuring personnel have an understanding of the importance of oily water separators and their safe use. What standards are referenced in the course? • International Convention for the Prevention of Pollution from Ships (MARPOL) Is there an assessment? Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 70%.
FSE High and Low Voltage Course code: MTP-063 Course type: E-learning course Duration: 150 minutes Language: English, Norwegian Price: GBP 100,- Who is this course for? This FSE High and Low Voltage Training course is suitable for everyone working on low and high voltage installations. Is previous experience required? You do not need prior knowledge or experience to complete this course, but it is assumed that you are competent in your designated role. How will this course benefit me? The course meets the requirements set in Section 7 of the ‘Safety Regulations for Work and Operation of Electrical Equipment and Installations – FSE’ which is that all relevant personnel undertake annual training and instruction in FSE. The course also provides the necessary training and instruction in first aid, focusing on electrical injuries, with the exception of the mandatory practical training in cardiopulmonary resuscitation (CPR). The regulations of various authorities make FSE applicable to all those working with electricity, whether on board ship, on platforms or on land. This course is suitable for all, regardless of which industry you work in. The authorities require that training in FSE and first aid in the event of electrical accidents is undertaken at least once a year. No more than 12 months shall elapse between training courses. How will this course benefit my company? By ensuring you have the knowledge and competence to be working on low and high voltage installations. What standards are referred to in this course? • Section 7 of the ‘Safety Regulations for Work and Operation of Electrical Equipment and Installations – FSE’ • The European standard Is there an assessment? Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.
Gas Measurement (Maritime) Course code: MGM-005 Course type: E-learning course Duration: 60 minutes Language: English Price: GBP 70,- Who is this course for? This course is for all personnel involved in the planning, execution or supervision of gas measurement on board. Is previous experience required? No previous experience is required to complete this course. How will this course benefit me? This course aims to provide learners with an introduction to dangerous atmospheres on board, how to detect and measure toxic and flammable gases, and the precautions and procedures to follow when entering confined spaces, enhancing their safety mindset. How will this course benefit my company? This course aims to provide information about the types of gases found in the maritime industry, the hazards involved when dealing with these substances and provides a general knowledge of how these gases are detected and measured in order to reduce incidents related to gas measurement. What standards are referred to in this course? • International Convention for the Safety of Life at Sea (SOLAS) • International Safety Guide for Oil Tankers and Terminals Is there an assessment? Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 70%.
FSE Low Voltage Course code: MTP-064 Course type: E-learning course Duration: 120 minutes Language: English, Norwegian Price: GBP 60,- Who is this course for? This FSE High and Low Voltage Training course is suitable for everyone working on low and high voltage installations. Is previous experience required? You do not need prior knowledge or experience to complete this course, but it is assumed that you are competent in your designated role. How will this course benefit me? The course meets the requirements set in Section 7 of the ‘Safety Regulations for Work and Operation of Electrical Equipment and Installations – FSE’ which is that all relevant personnel undertake annual training and instruction in FSE. The course also provides the necessary training and instruction in first aid, focusing on electrical injuries, with the exception of the mandatory practical training in cardiopulmonary resuscitation (CPR). The regulations of various authorities make FSE applicable to all those working with electricity, whether on board ship, on platforms or on land. This course is suitable for all, regardless of which industry you work in. The authorities require that training in FSE and first aid in the event of electrical accidents is undertaken at least once a year. No more than 12 months shall elapse between training courses. How will this course benefit my company? By ensuring you have the knowledge and competence to be working on low and high voltage installations. What standards are referred to in this course? • Section 7 of the ‘Safety Regulations for Work and Operation of Electrical Equipment and Installations – FSE’ • The European standard Is there an assessment? Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.
Diesel Engines and Lubricants (Maritime) Course code: MGM-088 Course type: E-learning course Duration: 15 minutes Language: English Price: NOK 400,- Who is the course for? Personnel who require a basic understanding of the operation of diesel engines and the importance of maintaining good lubrication for their safe operation. Is previous experience required? No previous experience is required to complete this course. How will the course benefit me? This course will provide you with an overview of how diesel engines operate, their components and their use within the industry. It will also outline the importance of maintaining good lubrication for their safe operation. How will the course benefit my company? This course will provide personnel with an overview of how diesel engines operate and the importance of maintaining good lubrication for their safe operation. What standards are referenced in the course? This course does not refer to specific legislation or standards. Is there an assessment? Yes
FSE High Voltage Course code: MTP-065 Course type: E-learning course Duration: 120 minutes Language: English, Norwegian Price: GBP 60,- Who is this course for? This FSE High and Low Voltage Training course is suitable for everyone working on low and high voltage installations. Is previous experience required? You do not need prior knowledge or experience to complete this course, but it is assumed that you are competent in your designated role. How will this course benefit me? The course meets the requirements set in Section 7 of the ‘Safety Regulations for Work and Operation of Electrical Equipment and Installations – FSE’ which is that all relevant personnel undertake annual training and instruction in FSE. The course also provides the necessary training and instruction in first aid, focusing on electrical injuries, with the exception of the mandatory practical training in cardiopulmonary resuscitation (CPR). The regulations of various authorities make FSE applicable to all those working with electricity, whether on board ship, on platforms or on land. This course is suitable for all, regardless of which industry you work in. The authorities require that training in FSE and first aid in the event of electrical accidents is undertaken at least once a year. No more than 12 months shall elapse between training courses. How will this course benefit my company? By ensuring you have the knowledge and competence to be working on low and high voltage installations. What standards are referred to in this course? • Section 7 of the ‘Safety Regulations for Work and Operation of Electrical Equipment and Installations – FSE’ • The European standard Is there an assessment? Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.
Safety Instrumented Systems Course code: IN-08 Course type: E-learning course Duration: 30 minutes Language: English Price: GBP 40,- Who is the course for? This course is for any person who interacts with, or is responsible for, the specification, design, operation and maintenance of assets that employ safety instrumented systems. Is previous experience required? No previous experience is required to complete this course. How will the course benefit me? This course will provide you with an awareness of the purpose and nature of safety systems deployed to protect people, the environment and plant in the areas that you work. How will the course benefit my company? By ensuring personnel have an understanding of safety instrumented systems. What standards are referenced in the course? IEC 61508 IEC 61511 IEC 62061 Is there an assessment? Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.
Introduction to Steering Gear (Maritime) Course code: MGM-080 Course type: E-learning course Duration: 30 minutes Language: English Price: NOK 500,- Who is the course for? Junior engineers, Junior Electrotechnical officers (ETO), Junior Deck Officers, Deck and Technical Ratings. Is previous experience required? No previous experience is required to complete this course. How will the course benefit me? This course will provide you with an introduction to how steering gear operates and the potential challenges with operation. How will the course benefit my company? This course will provide junior members of staff with an introduction on how steering gear operates. What standards are referenced in the course? International Convention for the Safety of Life at Sea (SOLAS) Is there an assessment? Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 70%.
Introduction to Digital Governor Systems (Maritime) Course code: MGM-073 Course type: E-learning course Duration: 30 minutes Language: English Price: NOK 500,- Who is the course for? Marine Engineers, Marine Electricians and engineering and electrical ratings. Is previous experience required? No previous experience is required to complete this course. How will the course benefit me? By providing you with an introduction to governors and digital governor systems. How will the course benefit my company? By providing personnel with an introduction to governors and digital governor systems. What standards are referenced in the course? This course does not refer to specific legislation or standards. Is there an assessment? Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 70%.

Hits per page